Skip to content

Seamless Finned Tubes

68 SKUs

Showing 1–48 of 68 SKUs

Low-fin copper tubes stacked in rows, fine fins with plain lands between the finned lengths

Low-Fin Copper-Alloy Tubes

C12200; C70600; C71500; C44300Seamless drawn
Inquire
Integral low-fin tube cut at an angle, fins rolled out of the tube wall

Integral Low-Fin Tubes

Integral Low-Fin TubesCS SA-179, SA-214, SA-334 Gr 1/3/6; Ferritic stainless 405/410/430/439; Austenitic 304/316/317/321; Duplex 2205/2101; 6Mo (N08367); Ni alloys 600/625/800/825/C-276; Alloy 400 (N04400); Ti Gr 1/2/16/26
Inquire
Inner-grooved copper tubes cut on the bias, fine helical grooves running along the inside of each bore

Inner-Grooved Copper Tubes

internal helical groovesInner-Grooved Copper Tubes
Inquire
Seamless steel pipe bundle seen at an angle, plain cut ends before end finishing

Casing and Tubing — API 5CT

J55; K55; N80-1; N80QSeamless, cold drawn or hot finished
Inquire
Carbon steel U-bend tubes nested by bend radius in a crate, spacer strip across the bends

Carbon Steel U-Bend Tubes

Bent from straight seamless or welded tubeA179; A192; A210; A214; A556
Inquire
Bundle of aluminium brass condenser tubes strapped for lifting

Aluminium Brass Condenser Tubes

Seamless drawnAluminium Brass Condenser Tubes
Inquire
Seamless U-bend tubes laid out by bend radius, with spacers between the rows

Alloy Steel U-Bend Tubes

A213 T11; A213 T22; A209 T1; A209 T1aBent from straight seamless or welded tube
Inquire
Notched fin tube close up, a tightly wound fin with notched, crinkled edges along the tube

Notched and Root-Serrated Fin Tubes

Notched and Root-Serrated Fin TubesHelically wound fin, notched or serrated at the root
Inquire
Overlapped wound fin tubes close up, fin feet overlapping on the tube above the bare ends

LL Overlapped Wound Fin Tubes

Aluminium; CopperLL Overlapped Wound Fin Tubes
Inquire
L-foot wound fin tubes close up, thin fins wrapped tightly round each tube

L-Foot Tension-Wound Fin Tubes

Unlimited: CS, stainless, copper alloysTension wound with an L-shaped foot; contact pressure only, which loosens with time and temperature cycling
Inquire
Wound aluminium fin tubes stacked, showing the bare steel tube ends

KL Knurled Wound Fin Tubes

KL Knurled Wound Fin TubesBase tube knurled first, L-foot pressed into the knurl while tension winding
Inquire
Crimped fin tubes stacked, with plain tube ends at one end

Crimped Fin Tubes

Edge-wound helical fin, crimped at the root, tension-wound on the base tubeCarbon steel, stainless steel, copper or copper alloy, to the standard on the order
Inquire
Helical pipe coils on a shop floor, evenly pitched turns held by spacer bars

Helical Pipe Coils

A106 B; A179; A192; A210; P235GH; stainless (other lane)Helical Pipe Coils
Inquire
Heat-exchanger tube bundle seen through the tube sheet, tubes running through the baffles

Heat Exchanger Tube Bundles

Heat Exchanger Tube BundlesEngineered to order, built to your data sheet or drawing
Inquire
Spiral finned tube coil, closely wound fins with a plain tube lead at one end

Finned Tube Coils

Engineered to order, built to your data sheet or drawingFinned Tube Coils
Inquire
Studded tubes close up, rows of welded steel studs on the tube surface

Studded Tubes

Each stud arc- or resistance-welded to the tubeStudded Tubes
Inquire
Ferritic stainless U-bend tubes nested by radius in a plastic-lined crate

Ferritic and Martensitic Stainless U-Bend Tubes

TP405; TP409; TP410; TP439; S44660Bent from straight seamless or welded tube
Inquire
Bright austenitic stainless U-bend tubes close up, polished legs and tight bends

Austenitic Stainless U-Bend Tubes

TP304/304L; TP316/316L; TP321; TP347; duplex S31803/S32205/S32750Austenitic Stainless U-Bend Tubes
Inquire
Pile of short-radius 180-degree return bends with plain cut ends

Return Bends — Short and Long Radius

Bent from straight seamless or welded tubeper family: SA179, SA192, SA210, SA213, SA334, SA335
Inquire
Elliptical tube with rectangular plate fins, cut end showing the oval bore

Oval and Elliptical Fin Tubes

Oval and Elliptical Fin Tubes
Inquire
Nickel-alloy U-bend tubes nested by bend radius in a crate, spacers between rows

Nickel-Alloy U-Bend Tubes

Nickel-Alloy U-Bend TubesN04400; N06600; N06625; N08800; N08825
Inquire
Drilled titanium tube sheet with bolt holes and pass-partition grooves, packed in a crate

Titanium Tube Sheets

Titanium Tube SheetsMachined from plate or forging to your drawing
Inquire
Naval brass tube sheet on the drilling machine bed, drilled hole pattern across the face

Naval Brass and Copper-Alloy Tube Sheets

Naval Brass and Copper-Alloy Tube SheetsMachined from plate or forging to your drawing
Inquire
Drilled duplex stainless tube sheet close up, rows of reamed tube holes

Duplex Stainless Tube Sheets

Machined from plate or forging to your drawingDuplex Stainless Tube Sheets
Inquire
Drilled steel tube sheet with a pass-partition groove across the full tube-hole pattern

Carbon Steel and Clad Tube Sheets

Machined from plate or forging to your drawingCarbon Steel and Clad Tube Sheets
Inquire
Bright stainless steel tubes laid side by side on the roller table of a tube line

Stainless Steel Heat Exchanger Tubes

Stainless Steel Heat Exchanger TubesSeamless, cold drawn or hot finished
Inquire
Ferritic stainless tubes laid in rows on a rack, bright annealed finish

Ferritic and Martensitic Stainless Tubes

TP405; TP409; TP410; TP430; TP439; 26-3-3Seamless, cold drawn or hot finished
Inquire
Extra-long stainless tubes laid out along the racks of a tube mill

Extra-Long Stainless Steel Tubes

Seamless, cold drawn or hot finishedTP304/304L; TP316/316L; duplex
Inquire
Cold-drawn precision steel tubes on a rack, thin walls visible at the cut ends

Precision Cold-Drawn Steel Tubes

Seamless, cold drawn or hot finishedPrecision Cold-Drawn Steel Tubes
Inquire
Longitudinal fin tubes in a crate, straight fins running the length of each tube

Longitudinal Fin Tubes

Electric resistance welded (fin strip formed into U-channel)Any weldable tube
Inquire
Seamless line pipe stacked end-on, close view of the plain pipe ends

Line Pipe — API 5L

Line PipeAPI 5L B–X65 PSL1/PSL2
Inquire
Large-diameter finned pipes on a shop floor, spiral welded fins with plain pipe ends

Large-Diameter Finned Pipe

Large-Diameter Finned PipeA106 B; A335 P5/P9/P11/P22; A312 TP304H/321H/347H
Inquire
Serrated spiral fin tubes stacked end-on, segmented steel fins round each bare tube end

High-Frequency Welded Spiral Fin Tubes — Solid and Serrated

CS A106 B, A192, A210; Cr-Mo A213 T5/T9/T11/T22, A335 P5/P9/P11/P22; Stainless A312/A213 TP304H/321/347High-Frequency Welded Spiral Fin Tubes
Inquire
H-fin tube end view, paired square steel fins welded either side of the tube

H-Fin and Rectangular Fin Tubes

H-Fin and Rectangular Fin TubesTwo plates with central arcs welded to one tube (H) or one plate across two tubes (double-H); in-line tubes
Inquire
Laser-welded fin tube on a bench, tight spiral fins stopping short of the plain tube end

Laser-Welded Fin Tubes

Stainless; Carbon steelLaser-Welded Fin Tubes
Inquire
Shell and tube heat exchanger tube bundle with tube sheet and baffles, before shell fitting

Shell and Tube Heat Exchangers

Shell and Tube Heat ExchangersEngineered to order, built to your data sheet or drawing
Inquire
Heat pipe heat exchanger casing in a workshop, two round duct connections on one face

Heat Pipe Heat Exchangers

Heat Pipe Heat ExchangersEngineered to order, built to your data sheet or drawing
Inquire
Floating head heat exchanger on saddle supports, bolted channel and inlet nozzles

Floating Head Heat Exchangers

Floating Head Heat ExchangersEngineered to order, built to your data sheet or drawing
Inquire
Fixed tubesheet heat exchangers painted grey, bolted end covers and capped nozzles

Fixed Tubesheet Heat Exchangers

Engineered to order, built to your data sheet or drawingFixed Tubesheet Heat Exchangers
Inquire
Finned tube evaporator coil in a painted steel casing with flanged inlet and outlet

Finned Tube Evaporator Coils

Engineered to order, built to your data sheet or drawingFinned Tube Evaporator Coils
Inquire
Compressor intercooler core, copper tube ends in the tube sheet above a stainless shell

Compressor Intercoolers and Aftercoolers

Engineered to order, built to your data sheet or drawingCompressor Intercoolers and Aftercoolers
Inquire
Finned tube heat exchanger bundles standing in a workshop, flanged header connections

Air-Cooled Heat Exchangers

Air-Cooled Heat ExchangersEngineered to order, built to your data sheet or drawing
Inquire
Forged weld-neck flange blanks with machined faces, laid out on the shop floor

Forged Flanges for Heat Exchangers

Forged Flanges for Heat ExchangersMachined from plate or forging to your drawing
Inquire
Low-fin U-bend tubes nested by radius, finned legs with plain bent sections

Low-Fin U-Bend Tubes

Low-Fin U-Bend Tubesintegral
Inquire
Finned U-bend tubes with fins stopped short of the bend, plain U-bends at the ends

Finned U-Bend Tubes

Carbon steel, stainless steel, copper or copper alloy, to the standard on the orderFinned U-Bend Tubes
Inquire
Finned tube serpentine bundles stacked on timber, finned straight legs with plain return bends

Finned Tubes for Air-Cooled Exchangers

CS; stainless; admiralty; exotic alloysAluminium (almost always); steel for very high temperature
Inquire
Feedwater heater U-tubes nested by radius, numbered spacer boards between rows

Feedwater Heater U-Tubes

Feedwater Heater U-TubesTP304/304L/304N; TP316/316L; N08367; A556 A2/B2/C2; A803 TP439
Inquire
Extruded aluminium fin tubes with the inner liner tube showing at each end

Extruded Aluminium Fin Tubes

Extruded Aluminium Fin TubesCarbon steel SA179, SA334 Gr 6; Stainless, duplex, titanium, copper alloys (liner of almost any material)
Inquire

Questions we get asked

About this range

01Do the tubes come with mill test certificates?
Yes. Tubes ship with the mill's test certificate to EN 10204 3.1 on request, and third-party inspection can be arranged against your inspection and test plan.
02Can you supply sizes that are not in the size tables?
Yes. The tables list typical sizes for each range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order.
03Do you build exchangers and tube sheets as well as tube?
Tube sheets, baffles and support plates are listed with their geometry. Exchangers, bundles and boiler pressure parts are built to your data sheet or drawing; send it and we quote.