Size range
Carbon Steel U-Bend Tubes

Carbon Steel U-Bend Tubes
From the blog
Written about this range
Heat-transfer tubes
U-bend tubes: bend radius, wall thinning and heat treatment
U-tubes are ordered as a bend schedule, not a size. What the minimum bend radius is, how wall thinning and ovality are controlled, when bends are heat treated and tested, and what to put on the order — for carbon, alloy, stainless, nickel-alloy and copper-alloy U-tubes.
4 min read
Heat-transfer tubes
A179 vs A192 vs A210 vs A213: choosing boiler and exchanger tube
Four ASTM standards cover most carbon and alloy steel tube in exchangers, boilers and superheaters. What each is for, how they differ in chemistry and strength, which tests they carry, and how to choose — with the grade tables.
3 min read
Heat-transfer tubes
Finned and seamless heat-transfer tube: a buyer’s guide
How to specify tube for air coolers, shell-and-tube exchangers, condensers, boilers and fired heaters: the standard and grade, OD and wall, length, fin type and bend schedule — and what to send with an enquiry so the quotation matches the data sheet.
6 min read
