Size range
Turnbuckles & Rigging Screws


Stainless Steel Turnbuckle — US Type, 1/4–1-1/2″, ASTM F1145

Stainless Steel Turnbuckle — Korean Type, Eye and Eye, 3/16–1″

Stainless Steel Turnbuckle — European Commercial Type, 40–2,750 kg WLL

Stainless Steel Rigging Screw — Swage and Fork Ends, M4–M36


Stainless Steel Drop Forged Turnbuckle — US Type, 500–75,000 lbs WLL

Stainless Steel DIN 1480 Turnbuckle — 40–2,750 kg WLL


Galvanized Rigging Screw, Closed Body — 0.1–11 t WLL

Drop Forged Turnbuckle — US Type, 500–75,000 lbs WLL


DIN 1478 Turnbuckle — Galvanized, 75–16,500 kg WLL


Commercial Turnbuckle — Eye and Eye, Cast Steel, M5–M42, DIN 1480


Questions we get asked
About this range
- 01Why do hook-end turnbuckles have a lower WLL?
- The hook is the weaker end fitting, so a turnbuckle with hook ends is rated below the same body with eye or jaw ends. The US turnbuckle table gives both ratings.
- 02Do the parts come with test certificates?
- Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
From the blog
Written about this range
Lifting & rigging
How to choose and tension a turnbuckle: end fittings, ratings, locking and inspection
A turnbuckle looks simple — two threads and a body — but the end fittings change its rating by half, an unlocked one can spin itself loose, and it is built for straight pulls only. How to choose the end fittings, body and size, read the rating, tension it properly, lock it, and know when to take it out of service.
4 min read
Lifting & rigging
DIN 1480 vs DIN 1478 turnbuckles: open frame or closed body?
DIN 1480 and DIN 1478 are the two German standards behind most metric turnbuckles in the Gulf. One is a forged open frame you can see the threads through; the other a closed tube that hides them. What each standard covers, how their ratings compare size for size, how the end fittings change things, and which to choose for bracing, guying, lashing and fencing.
3 min read
Lifting & rigging
Turnbuckle types: hook, eye and jaw ends, open and closed bodies, and what each can carry
A turnbuckle is only as strong as its weakest end, and that is usually the hook: on our US drop-forged range a 1/2″ hook end is rated 1,500 lb against 2,200 lb for eye or jaw ends. Here is how end fittings and body types change the rating, which standards cover what, and how to keep a turnbuckle from unwinding.
6 min read

