Skip to content
IH-TF-WF-KL

KL Knurled Wound Fin Tubes

Wound Fin Tubes (L / LL / KL)Ex-stock · delivery in 3 days
Wound aluminium fin tubes stacked, showing the bare steel tube ends
VIEW 01·Wound aluminium fin tubes stacked, showing the bare steel tube ends

L-foot aluminium or copper fins tension-wound onto a base tube that is knurled first, so the foot is pressed into the knurl. Made to API 661 / ISO 13706. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.

Key features

  • Product type: KL Knurled Wound Fin Tubes
  • Construction: Base tube knurled first, L-foot pressed into the knurl while tension winding
  • Standards: API 661 / ISO 13706
  • Base tube material: CS A179/A192/A106 B; Stainless TP304/316/321; Cu alloys B111
  • Fin material: Aluminium 1050/1060; Copper
  • Outside diameter: 19.05–38.1 mm
  • Wall thickness: 1.65–3.0
  • Fin geometry: height 6–50 (common 9.5–16); thickness 0.3–0.5
  • Maximum service temperature: 260 °C typical maker limit (published 165–260 °C; confirm with maker per order)
Product type
KL Knurled Wound Fin Tubes
Construction
Base tube knurled first, L-foot pressed into the knurl while tension winding
Base tube material
CS A179/A192/A106 B; Stainless TP304/316/321; Cu alloys B111
Fin material
Aluminium 1050/1060; Copper
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

L-foot aluminium or copper fins tension-wound onto a base tube that is knurled first, so the foot is pressed into the knurl. The knurl gives a firmer bond than a plain L-foot, so KL fins hold at higher temperatures in air-cooled exchangers.

Specification

  • Maximum service temperature: 260 °C typical maker limit (published 165–260 °C; confirm with maker per order)
  • Base tube OD (mm): 15.88–165 (common 5/8–1 1/2 in)
  • Base tube wall (mm): 1.65–3.0
  • Fin height (mm): 6–50 (common 9.5–16)
  • Fin thickness (mm): 0.3–0.5
  • Fin material: Aluminium 1050/1060, copper
  • Bond type: Base tube knurled first, L-foot pressed into the knurl while tension winding

Standards

API 661 / ISO 13706. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Materials

  • Tube: CS A179/A192/A106 B; Stainless TP304/316/321; Cu alloys B111
  • Fins: Aluminium 1050/1060; Copper

Testing and documents

  • Base tube per its spec
  • Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan

Where it is used

  • ACHE services between L-fin and embedded-fin temperatures

Sizes

3 sizes, each under its own Indus part number in the size table. The table lists typical sizes for the range; other sizes are made on request.

Ordering

Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the fin type, material, height, thickness and fins per inch, and the bare length at each end. We quote with the mill certificates and the inspection you need.

Identification

ParameterValue
Product typeKL Knurled Wound Fin Tubes
ConstructionBase tube knurled first, L-foot pressed into the knurl while tension winding

Compliance

ParameterValue
StandardsAPI 661 / ISO 13706

Construction

ParameterValue
Base tube materialCS A179/A192/A106 B; Stainless TP304/316/321; Cu alloys B111
Fin materialAluminium 1050/1060; Copper

Dimensions

ParameterValue
Outside diameter19.05–38.1 mm
Wall thickness1.65–3.0
Fin geometryheight 6–50 (common 9.5–16); thickness 0.3–0.5
LengthRandom or fixed lengths; cut to length on request
Size tableTypical sizes — other sizes on request

Performance

ParameterValue
Maximum service temperature260 °C typical maker limit (published 165–260 °C; confirm with maker per order)

Quality

ParameterValue
TestingBase tube per its spec
CertificationMill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement

Application

ParameterValue
Typical servicesACHE services between L-fin and embedded-fin temperatures

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at