Skip to content

Copper & Copper-Alloy Tubes

8 SKUs

Showing 1–8 of 8 SKUs

Low-fin copper tubes stacked in rows, fine fins with plain lands between the finned lengths

Low-Fin Copper-Alloy Tubes

C12200; C70600; C71500; C44300Seamless drawn
Inquire
Inner-grooved copper tubes cut on the bias, fine helical grooves running along the inside of each bore

Inner-Grooved Copper Tubes

internal helical groovesInner-Grooved Copper Tubes
Inquire
Bundle of aluminium brass condenser tubes strapped for lifting

Aluminium Brass Condenser Tubes

Seamless drawnAluminium Brass Condenser Tubes
Inquire
PVC-coated copper tube in a gentle bend, white coating stripped back from the cut end to show bare copper

Plastic-Coated Copper Tubes

coating: PVC or PEPlastic-Coated Copper Tubes
Inquire
Bundle of straight copper tubes on a workshop floor

Copper Tubes

Copper TubesSeamless drawn
Inquire
90/10 copper-nickel tubes stacked, cut ends of the bundle

Copper-Nickel Condenser Tubes — 90/10 and 70/30

Copper-Nickel Condenser TubesSeamless drawn
Inquire
Admiralty brass tubes stacked, cut ends showing

Admiralty Brass Condenser Tubes

Seamless drawnC44300 arsenical; C44400 antimonial; C44500 phosphorised; CW706R CuZn28Sn1As
Inquire

Questions we get asked

About this range

01What standard covers copper-alloy condenser tubes?
ASTM B111 for straight tubes and B395 for U-bends, with EN 12451 in Europe. Low-fin tube is ASTM B359.
02Are brass condenser tubes stress-relief tested?
Yes. Admiralty and aluminium brass tubes are tested for residual stress, by the mercurous nitrate test (B154) or the ammonia vapour test (B858).