Austenitic Stainless U-Bend Tubes

U-tubes bent from seamless or welded TP304, 304L, 316, 316L and other austenitic stainless tube, for exchangers and feedwater heaters, to your bend schedule. Made to ASTM A213, ASTM A249, ASTM A688. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Austenitic Stainless U-Bend Tubes
- Construction: Bent from straight seamless or welded tube
- Standards: ASTM A213, ASTM A249, ASTM A688, TEMA, DIN 28179
- Base tube material: TP304/304L; TP316/316L; TP321; TP347; duplex S31803/S32205/S32750
- Outside diameter: 15.88–25.4 mm
- Wall thickness: 1.65–2.11 mm
- Product type
- Austenitic Stainless U-Bend Tubes
- Construction
- Bent from straight seamless or welded tube
- Base tube material
- TP304/304L; TP316/316L; TP321; TP347; duplex S31803/S32205/S32750
Product description
U-tubes bent from seamless or welded TP304, 304L, 316, 316L and other austenitic stainless tube, for exchangers and feedwater heaters, to your bend schedule. Bends are solution-annealed to order.
Specification
- Minimum bend radius: 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD
- Wall thinning at the bend: Per the governing specification on the order (ASTM A688 / TEMA, or A556 / B395) — no single percentage
- Bend heat treatment: To order: stress-relief or solution anneal of the bend plus ~150 mm of leg (A688), or ≥300 mm where the project specification requires
- Leg length: Up to ~12 m typical; straight tube up to 30 m on request
- ASTM A249 U-bend clauses: None — A249 has no U-bend section; bend requirements come from the order, TEMA or A688-style clauses
Standards
ASTM A213, ASTM A249, ASTM A688, TEMA, DIN 28179. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: TP304/304L; TP316/316L; TP321; TP347; duplex S31803/S32205/S32750
Testing and documents
- Duplex bends: ferrite 40–60 % and A923 Method A free of sigma on smallest-radius qualification tube
- Each U-tube hydrostatic or pneumatic tested after bending/HT where A688 applies; some makers hydro-test bent tubes only on request
- IGC (A262) on smallest heat-treated bend
- Straight tube eddy-current tested before bending
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Refinery and petrochemical U-tube bundles (REAC, amine, overhead) in duplex/316L
Sizes
5 sizes, each under its own Indus part number in the size table. These are the common sizes; others are made on request.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the bend schedule: centreline radius and leg length for each row, and any heat treatment of the bends. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Austenitic Stainless U-Bend Tubes |
| Construction | Bent from straight seamless or welded tube |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM A213, ASTM A249, ASTM A688, TEMA, DIN 28179 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | TP304/304L; TP316/316L; TP321; TP347; duplex S31803/S32205/S32750 |
Dimensions
| Parameter | Value |
|---|---|
| Outside diameter | 15.88–25.4 mm |
| Wall thickness | 1.65–2.11 mm |
| Length | Random or fixed lengths; cut to length on request |
| Bend radius | 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD |
| Size table | Common sizes |
Quality
| Parameter | Value |
|---|---|
| Testing | Duplex bends: ferrite 40–60 % and A923 Method A free of sigma on smallest-radius qualification tube; Each U-tube hydrostatic or pneumatic tested after bending/HT where A688 applies; some makers hydro-test bent tubes only on request; IGC (A262) on smallest heat-treated bend; Straight tube eddy-current tested before bending |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Refinery and petrochemical U-tube bundles (REAC, amine, overhead) in duplex/316L |
Shipping & lead time
Sizes & part numbers
5 sizes- Indus part no.IH-TF-US-AUS-0159-165
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 16
- Wall (mm)
- 1.65
- Max. length (m)
- 12
- Indus part no.IH-TF-US-AUS-0190-165
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 16
- Wall (mm)
- 1.65
- Max. length (m)
- 12
- Indus part no.IH-TF-US-AUS-0190-211
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 14
- Wall (mm)
- 2.11
- Max. length (m)
- 12
- Indus part no.IH-TF-US-AUS-0254-165
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 16
- Wall (mm)
- 1.65
- Max. length (m)
- 12
- Indus part no.IH-TF-US-AUS-0254-211
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 14
- Wall (mm)
- 2.11
- Max. length (m)
- 12
O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. BWG — Birmingham Wire Gauge of the wall, the usual way heat-exchanger tube wall is ordered. Wall (mm) — Wall thickness in millimetres: minimum or average wall per the governing standard and the order. Max. length (m) — Longest single length usually made, in metres; longer on request.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What are austenitic stainless U-bend tubes used for?▾
How are the part numbers such as IH-TF-US-AUS-0159-165 read?▾
What sizes and lengths do the Austenitic Stainless U-Bend Tubes come in?▾
How tight a bend can austenitic stainless U-tubes be made to?▾
What testing applies to the Austenitic Stainless U-Bend Tubes?▾
Which grades are available in the Austenitic Stainless U-Bend Tubes?▾
Which standards and certificates apply to the Austenitic Stainless U-Bend Tubes?▾
What does the Austenitic Stainless U-Bend Tubes connect to?▾
How are the bends heat treated on the Austenitic Stainless U-Bend Tubes?▾
How do austenitic and ferritic stainless U-bend tubes differ?▾
Can you export the Austenitic Stainless U-Bend Tubes from Dubai?▾
Do you keep the Austenitic Stainless U-Bend Tubes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Heat-transfer tubes
U-bend tubes: bend radius, wall thinning and heat treatment
U-tubes are ordered as a bend schedule, not a size. What the minimum bend radius is, how wall thinning and ovality are controlled, when bends are heat treated and tested, and what to put on the order — for carbon, alloy, stainless, nickel-alloy and copper-alloy U-tubes.
4 min read
Heat-transfer tubes
Stainless heat exchanger tube: A213, A249, A268 and A789 grades
Seamless or welded, austenitic, ferritic or duplex: how the four main ASTM stainless tube standards divide up, what each grade is chosen for in refinery, gas-plant and power service, and the tests that come with them.
3 min read
Heat-transfer tubes
Finned and seamless heat-transfer tube: a buyer’s guide
How to specify tube for air coolers, shell-and-tube exchangers, condensers, boilers and fired heaters: the standard and grade, OD and wall, length, fin type and bend schedule — and what to send with an enquiry so the quotation matches the data sheet.
6 min read

