Skip to content
IH-TF-SH-DPX

Duplex Stainless Tube Sheets

Tube SheetsEx-stock · delivery in 3 days
Drilled duplex stainless tube sheet close up, rows of reamed tube holes
VIEW 01·Drilled duplex stainless tube sheet close up, rows of reamed tube holes

Tube sheets in duplex F51 (S31803) and super duplex F53 (S32750), solid or clad on carbon steel, for seawater coolers and chloride service. Made to ASTM A182 / ASME SA-182 F51, F53, ASTM A240 S31803 / S32750, TEMA. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.

Key features

  • Product type: Duplex Stainless Tube Sheets
  • Construction: Machined from plate or forging to your drawing
  • Standards: ASTM A182 / ASME SA-182 F51, F53, ASTM A240 S31803 / S32750, TEMA, NACE MR0175 / ISO 15156
Product type
Duplex Stainless Tube Sheets
Construction
Machined from plate or forging to your drawing
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Tube sheets in duplex F51 and super duplex F53, solid or clad on carbon steel, for seawater coolers and chloride service.

Specification

  • Grades: SA/A182 F51 (UNS S31803) duplex; F53 (UNS S32750) super duplex; SA-240 plate equivalents
  • Clad alternative: Duplex 2205 / super duplex 2507 explosion-clad on SA-516-70 or P355GH, used for seawater coolers and chloride streams
  • Hole fit in ACHE headers: Special close fit mandatory when duplex tubes are used (API 661 / ISO 13706 cl. 9.3.1.2)
  • Expansion: 4-5% wall reduction (stainless family); minimal re-rolling because of work hardening
  • Minimum tube pitch: 1.25 x tube OD (triangular or square)
  • Tube layout angles: 30 deg (triangular), 60 deg (rotated triangular), 90 deg (square), 45 deg (rotated square)
  • Tube-hole grooving (expanded joints): Grooves for tubes 5/8 in OD and larger; 1 groove when tubesheet <= 25 mm (1 in) thick, 2 grooves when thicker; grooves about 3.2 mm (1/8 in) wide with 6.4 mm (1/4 in) between them; final size/arrangement at maker's discretion
  • Tube-hole finish: Drill, ream, then size or burnish; no longitudinal scoring; clean grooves to bare metal before retubing

Standards

ASTM A182 / ASME SA-182 F51, F53, ASTM A240 S31803 / S32750, TEMA, NACE MR0175 / ISO 15156. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Testing and documents

  • Bond UT if clad
  • Ferrite / microstructure checks per purchaser spec (not sourced here)
  • Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan

Where it is used

  • Desalination and produced-water service
  • Seawater-cooled exchangers in gas plants and refineries

Standard geometry

Tube OD (in)Tube OD (mm)Min pitch 1.25 x OD (in)Min pitch 1.25 x OD (mm)Min square pitch with 6.4 mm (1/4 in) cleaning lane (in)Min square pitch with cleaning lane (mm)
5/815.880.78119.840.87522.23
3/419.050.93823.811.00025.40
125.401.25031.751.25031.75
1-1/431.751.56339.691.56339.69
1-1/238.101.87547.631.87547.63

These are the limits of the standard, not part numbers. Each item is made to your drawing.

How we supply

Tube sheets, baffles and plates are made to the purchaser's drawing, so there is no catalogue part number for each size. We cut, machine, drill, ream and groove them from certified plate or forgings, stack-drill baffles and support plates so the holes line up through the bundle, and check hole size, pitch and ligaments against the drawing before dispatch. Send the drawing, or the material, the outside diameter, the thickness, the tube size and the pitch and layout, and we quote with the mill certificates and the inspection you need.

Ordering

Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity. We quote with the mill certificates and the inspection you need.

Identification

ParameterValue
Product typeDuplex Stainless Tube Sheets
ConstructionMachined from plate or forging to your drawing

Compliance

ParameterValue
StandardsASTM A182 / ASME SA-182 F51, F53, ASTM A240 S31803 / S32750, TEMA, NACE MR0175 / ISO 15156

Dimensions

ParameterValue
LengthRandom or fixed lengths; cut to length on request
Size tableMade to your drawing; standard geometry in the description

Quality

ParameterValue
TestingBond UT if clad; Ferrite / microstructure checks per purchaser spec (not sourced here)
CertificationMill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement

Application

ParameterValue
Typical servicesDesalination and produced-water service; Seawater-cooled exchangers in gas plants and refineries

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at