Category
Hydraulic SAE Flanges
SAE J518 hydraulic flanges — BSP/NPT-threaded back, weld-in / weld-on, blind-flange, plus accessory O-rings and bolt sets. Code 61 (210 bar) and Code 62 (415 bar). Sizes 1/2" to 5".
Delivery
Hydraulic SAE Flanges across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- South-East Asia
- Singapore, Vietnam, Philippines
SAE Blind Flange
BSP Threaded Double Flange
O-Rings for SAE Hydraulic Flanges
Socket Weld Double Flange
Set of Bolts and Spring Washers
From the blog
Written about this range
Specification & standards
SAE J518 Code 61 and Code 62 flanges: telling them apart before you order
Two split-flange halves for the same bore, one rated for far more pressure than the other, and almost nothing on the part to say which is which. The measurement that settles it takes ten seconds.
5 min read
Specification & standards
Where JIC is the wrong choice
JIC is the default on most of this continent and it deserves to be. It is also the wrong answer in four specific situations, and every one of them is a situation where people keep specifying it anyway.
4 min read