Category
Push-to-Connect Pneumatic Fittings
One-touch push-in fittings for inch outside-diameter air tube, from 5/32" to 1/2".
Choosing a push-in fitting
Choose by tube O.D. first, then by the thread at the port: NPT male, NPT female, or tube-to-tube. Cut the tube square with a tube cutter and push it fully home past the O-ring. These fittings are for compressed air only.
Threads and rating
Threaded ends are NPT to ASME B1.20.1. Published rating: 0 to 150 psi, vacuum to −29.5 inHg, 32 °F to 140 °F.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Push-to-Connect Pneumatic Fittings across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- West & Central Africa
- Nigeria, Sierra Leone, Cameroon
- Southern Africa
- South Africa, Namibia, Botswana
Push-to-Connect Male Y Connector, NPT × Tube × Tube
Push-to-Connect Straight Union
Push-to-Connect Male Branch Tee, Tube × NPT
Push-to-Connect Male Run Tee, NPT × Tube × Tube
Push-to-Connect Tube End Cap
Push-to-Connect Plug
Push-to-Connect Bulkhead Female Connector, Tube × NPT
Push-to-Connect Female Elbow, Tube × NPT
Push-to-Connect Banjo Elbow, Tube × NPT Male
Push-to-Connect Reducing Union Tee
Push-to-Connect Reducing Union
Push-to-Connect Female Connector, Tube × NPT
Push-to-Connect Male Connector, Tube × NPT
Questions we get asked
About this range
- 01Do these fit metric tube?
- No: they are sized for inch outside-diameter tube, 5/32" to 1/2".
- 02Can they be used for hydraulic oil or water?
- No. They are rated for compressed air only.