Skip to content

NPT / NPSM / SAE Hose Fittings

52 SKUs6 brands

Showing 1–48 of 52 SKUs

Dixon Swivel Nuts, range photo

Dixon Swivel Nuts

Dixon Valve & Coupling
Inquire
Dixon Swivel Nut Elbows, range photo

Dixon Swivel Nut Elbows

Dixon Valve & Coupling
Inquire
Dixon Swivel Elbows, range photo

Dixon Swivel Elbows

Dixon Valve & Coupling
Inquire
Dixon Street Elbows, range photo

Dixon Street Elbows

Dixon Valve & Coupling
Inquire
Category image · Hoses & Fittings

Dixon Nut Elbows

Dixon Valve & Coupling
Inquire
SAE O-ring boss male hose fitting (SAE J1926), yellow zinc-plated steel with O-ring and crimp tail

SAE O-Ring Male Hose Fitting

Indus HydraulicsstraightStatic O-ring seal under shoulder
Inquire
Dixon NPTF Pipe Crosses, range photo

Dixon NPTF Pipe Crosses

Dixon Valve & Coupling
Inquire
SAE male O-ring boss swivel hose fitting (SAE J1926), yellow zinc-plated steel with crimp tail

SAE Male Boss Swivel O-Ring Hose Fitting

Indus HydraulicsstraightStatic O-ring seal under shoulder (threads bottom out)
Inquire
Straight SAE male hose fitting, 45° flare cone (SAE J512), zinc-plated steel with crimp tail

SAE Male 45° Cone Hose Fitting

Indus HydraulicsUN/UNF (7/16-20 to 1-1/16-14 — SAE 45° flare sizes)-04 to -12
Inquire
Straight SAE inverted flare hose fitting, zinc-plated steel tube nut on a crimp tail

SAE Inverted Flare Hose Fitting

Indus HydraulicsstraightSAE inverted flare (45° female cone in fitting body)
Inquire
Straight SAE female swivel hose fitting, 45° flare cone (SAE J512), zinc-plated steel

SAE Female 45° Cone Hose Fitting

Indus Hydraulicsstraight45° cone seat (SAE J512)
Inquire
NPT male tapered pipe thread hose fitting, straight, zinc-plated steel hex body and crimp tail

NPT Male Hose Fitting

Indus HydraulicsstraightNPT 1/8 – 2
Inquire
NPSM male swivel hose fitting, zinc-plated steel hex nut over threaded male end and crimp tail

NPSM Male Swivel Hose Fitting

Indus Hydraulics60° internal cone (swivel nut — seal on the cone, not the thread)NPSM straight pipe thread (1/4" – 2" NPSM)
Inquire
90° elbow SAE inverted flare hose fitting, zinc-plated steel tube nut on a crimp tail

90° SAE Inverted Flare Hose Fitting

Indus HydraulicsUN/UNF (3/8-24 to 5/8-18 — typical inverted-flare sizes)-03 to -10
Inquire
90° elbow SAE female swivel hose fitting, 45° flare cone (SAE J512), zinc-plated steel

90° SAE Female 45° Cone Hose Fitting

Indus Hydraulics90-elbow45° cone seat (SAE J512)
Inquire
45° elbow SAE inverted flare hose fitting, zinc-plated steel tube nut on a crimp tail

45° SAE Inverted Flare Hose Fitting

Indus Hydraulics-03 to -10UN/UNF (3/8-24 to 5/8-18)
Inquire
45° elbow SAE female swivel hose fitting, 45° flare cone (SAE J512), zinc-plated steel

45° SAE Female 45° Cone Hose Fitting

Indus HydraulicsUN/UNF (7/16-20 to 1-1/16-14)45-elbow
Inquire

Questions we get asked

About this range

01Where are SAE 45° flare fittings used?
On refrigeration, fuel and lower-pressure hydraulic lines, mostly on North American equipment. For most hydraulic service the 37° JIC flare is the common form.
02What is an inverted flare?
A flare formed inside the female port, sealed by a male nut that seats against it — common on brake and fuel lines.