Skip to content
IH-TF-HX-EVC

Finned Tube Evaporator Coils

Heat ExchangersEx-stock · delivery in 3 days
Finned tube evaporator coil in a painted steel casing with flanged inlet and outlet
VIEW 01·Finned tube evaporator coil in a painted steel casing with flanged inlet and outlet

Finned tube evaporator coils for process and refrigeration duty, built to your data sheet. Evaporator coils boil a refrigerant or a process fluid inside the tubes while air or gas passes across the fins. The circuiting, tube size and fin spacing are set by the refrigerant, the evaporating temperature and the frosting or fouling the coil will see, and the coil is leak-tested and dried before it is sealed for shipping. Made to API 660 / EN 13445 / PED, ASME SA106, ASME SA179. Built to your data sh

Key features

  • Product type: Finned Tube Evaporator Coils
  • Construction: Engineered to order, built to your data sheet or drawing
  • Standards: API 660 / EN 13445 / PED, ASME SA106, ASME SA179, ASME SA192, EN 13445, GB/T 151, PED 2014/68/EU
Product type
Finned Tube Evaporator Coils
Construction
Engineered to order, built to your data sheet or drawing
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Finned tube evaporator coils for process and refrigeration duty, built to your data sheet.

Evaporator coils boil a refrigerant or a process fluid inside the tubes while air or gas passes across the fins. The circuiting, tube size and fin spacing are set by the refrigerant, the evaporating temperature and the frosting or fouling the coil will see, and the coil is leak-tested and dried before it is sealed for shipping.

Finned Tube Evaporator Coils are engineered equipment, not catalogue items. We quote against your data sheet or drawing, and the design, materials, inspection and documents follow the code and the specification you give us.

How we build and quote

Coils are built to the duty and the space they go into. The tube or pipe grade, the bend radii and the coil dimensions come from the drawing or from our design for your duty; finned coils add the fin type, material and spacing. Bends are made to keep wall thinning and ovality inside the governing specification, welds are to qualified procedures, and each coil is pressure tested and documented to the inspection and test plan before it ships.

Standards

API 660 / EN 13445 / PED, ASME SA106, ASME SA179, ASME SA192, EN 13445, GB/T 151, PED 2014/68/EU. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Testing and documents

  • Documentation, inspection and test plan to the order's code and specification

Where it is used

  • Process evaporators and HRSG-type heat recovery

What to send for a quotation

  • Duty: fluid, flow, temperatures and pressure
  • Coil type and dimensions, or the drawing
  • Tube or pipe material, OD and wall
  • Fin type, material and spacing (finned coils)
  • Design code, test pressure and inspection
  • Quantity and delivery point

Identification

ParameterValue
Product typeFinned Tube Evaporator Coils
ConstructionEngineered to order, built to your data sheet or drawing

Compliance

ParameterValue
StandardsAPI 660 / EN 13445 / PED, ASME SA106, ASME SA179, ASME SA192, EN 13445, GB/T 151, PED 2014/68/EU

Quality

ParameterValue
CertificationCode documentation and inspection to the order

Dimensions

ParameterValue
Size tableEngineered to order: quoted from your data sheet or drawing

Application

ParameterValue
Typical servicesProcess evaporators and HRSG-type heat recovery

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at