Longitudinal Fin Tubes

Steel fin channels welded along the length of the tube, in multiples of four. Made to ASTM A106, ASTM A179, ASTM A213. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Longitudinal Fin Tubes
- Construction: Electric resistance welded (fin strip formed into U-channel)
- Standards: ASTM A106, ASTM A179, ASTM A213
- Base tube material: Any weldable tube
- Fin material: CS; Stainless
- Fin geometry: height 5.3–38.1 (0.21–1 1/2 in); thickness 0.89–1.27 (0.035–0.050 in)
- Product type
- Longitudinal Fin Tubes
- Construction
- Electric resistance welded (fin strip formed into U-channel)
- Base tube material
- Any weldable tube
- Fin material
- CS; Stainless
Product description
Steel fin channels welded along the length of the tube, in multiples of four. Used in double-pipe and multi-tube hairpin exchangers and in tank and line heaters, where flow runs along the tube rather than across it.
Specification
- Fin height (mm): 5.3–38.1 (0.21–1 1/2 in)
- Fin thickness (mm): 0.89–1.27 (0.035–0.050 in)
- Number of fins: Multiple of 4; max ≈ circumference / 3.8 mm (0.15 in)
- Fin forms: Solid or perforated; cut-and-twist option
- Weld process: Electric resistance welded (fin strip formed into U-channel)
- Max length (m): 18.3 (720 in)
Standards
ASTM A106, ASTM A179, ASTM A213. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: Any weldable tube
- Fins: CS; Stainless
Testing and documents
- Base tube hydrotest
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Double-pipe / hairpin exchangers and tank suction heaters for heavy oils and bitumen
Sizes
1 size, each under its own Indus part number in the size table. The table gives the range as limits; any size inside it is made to order.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the fin type, material, height, thickness and fins per inch, and the bare length at each end. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Longitudinal Fin Tubes |
| Construction | Electric resistance welded (fin strip formed into U-channel) |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM A106, ASTM A179, ASTM A213 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | Any weldable tube |
| Fin material | CS; Stainless |
Dimensions
| Parameter | Value |
|---|---|
| Fin geometry | height 5.3–38.1 (0.21–1 1/2 in); thickness 0.89–1.27 (0.035–0.050 in) |
| Length | 18.3 m maximum single length |
| Size table | Size range — discrete sizes on request |
Quality
| Parameter | Value |
|---|---|
| Testing | Base tube hydrotest |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Double-pipe / hairpin exchangers and tank suction heaters for heavy oils and bitumen |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-TF-LG-LON-R1
- O.D. (mm)
- 15.9–273.1
- O.D. (in)
- 5/8–10 3/4
- Fin height (mm)
- 5.3–38.1
- Fin thickness (mm)
- 0.89–1.27
- Max. length (m)
- 18.3
O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. Fin height (mm) — Height of the fin above the tube surface in millimetres. Fin thickness (mm) — Fin strip or plate thickness in millimetres. Max. length (m) — Longest single length usually made, in metres; longer on request.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What are longitudinal fin tubes and where are they used?▾
What tube sizes can longitudinal fin tubes be made in?▾
What fin height, fin thickness and number of fins are available on longitudinal fin tubes?▾
How do I read the Indus part number IH-TF-LG-LON-R1 for longitudinal fin tubes?▾
What is the maximum single length of longitudinal fin tubes?▾
What materials can longitudinal fin tubes be made from?▾
Can longitudinal fin tubes have solid or perforated fins?▾
Which standards apply to longitudinal fin tubes?▾
What tests and certificates come with longitudinal fin tubes?▾
Longitudinal fin tubes compared with spiral wound fin tubes: which suits my exchanger?▾
How should longitudinal fin tubes be cleaned and kept free of fouling?▾
Can you supply longitudinal fin tubes from Dubai, and what do I send for a quote?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
