Ferrule to rope, die to ferrule
A ferrule is sized to the rope, and it is pressed with a die made for that ferrule size — the finished diameter is what makes the termination. Aluminium ferrules suit steel wire rope in normal service; copper suits stainless rope; steel sleeves take the higher loads of Flemish eye terminations.
Questions we get asked
About this range
- 01Do the parts come with test certificates?
- Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
Category
Wire Rope Ferrules & Sleeves
Aluminium ferrules to EN 13411-3 and JIS, Form C tapered ferrules, oval and hourglass sleeves and stop buttons in aluminium, copper and steel, and S-505 Flemish eye sleeves.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Wire Rope Ferrules & Sleeves across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Rigging hardware is bought on its working load limit and its certificate, and both travel with the part: every shackle, hook, chain and sling ships from Dubai with the manufacturer's test certificate, so the receiving inspection checks a document against a stamp rather than a claim. Hardware and fittings go by air or courier in cartons; wire rope, chain, hoists and anchors are heavy enough that sea freight is usually the sensible answer.
Beyond the Gulf
- North Africa
- Egypt, Mauritania, Morocco
Duplex Swaging Sleeve — S-506 Pattern
