Skip to content

Below-the-Hook Lifting

28 SKUs

Showing 1–28 of 28 SKUs

Telescopic spreader beam with sliding inner section, adjustment pin holes and shackles at both ends

Telescopic Spreader Beams — 4 t to 16 t, EN 13155

Steel, telescopic sections with pinned adjustmentTelescopic spreader beam
Inquire
Semi-spreader lifting beam with two top lugs and three bottom lifting points

Semi-Spreader Lifting Beams — EN 13155

Structural steel, grade to the design
Inquire
Self-closing scissor grab with curved jaws and a top shackle

Scissor Grabs — EN 13155

Structural steel, grade to the design
Inquire
Lifting beam hanging a precast concrete wall unit upright on four vertical slings

Precast Concrete Lifting Beams — EN 13155

Structural steel, grade to the design
Inquire
Plate lifting beam: flat steel beam with a row of lifting holes along its lower edge

Plate Lifting Beams — EN 13155

Structural steel, grade to the design
Inquire
90 t modular spreader frame: four corner units, bolted struts, upper and lower corner shackles

Modular Spreader Frames — 10 t to 90 t, EN 13155

Steel corner units with bolt-in modular strutsModular spreader frame
Inquire
8 t modular spreader beam with bolted strut flanges and upper and lower shackles, 3D render

Modular Spreader Beam — 8 t, 0.5–4.5 m Span, up to 8 t WLL, EN 13155

Modular spreader beamSteel, bolted modular construction
Inquire
70 t modular spreader beam assembled with flanged struts and shackles at both end units, 3D render

Modular Spreader Beam — 70 t, 1–14 m Span, up to 70 t WLL, EN 13155

Steel, bolted modular constructionModular spreader beam
Inquire
50 t modular spreader beam with heavy end units, flanged struts and shackles, 3D render

Modular Spreader Beam — 50 t, 1–13 m Span, up to 50 t WLL, EN 13155

Modular spreader beamSteel, bolted modular construction
Inquire
4 t modular spreader beam assembled from end units and bolted struts, shackles at each end, 3D render

Modular Spreader Beam — 4 t, 0.5–4.5 m Span, up to 4 t WLL, EN 13155

Modular spreader beamSteel, bolted modular construction
Inquire
34 t modular spreader beam: end units, bolted strut joints and upper and lower shackles, 3D render

Modular Spreader Beam — 34 t, 1–10 m Span, up to 34 t WLL, EN 13155

Modular spreader beamSteel, bolted modular construction
Inquire
24 t modular spreader beam assembled to span with bolted struts and end-unit shackles, 3D render

Modular Spreader Beam — 24 t, 1–8 m Span, up to 24 t WLL, EN 13155

Steel, bolted modular constructionModular spreader beam
Inquire
13 t modular spreader beam built from end units and flanged struts, shackles fitted, 3D render

Modular Spreader Beam — 13 t, 0.5–6.5 m Span, up to 13 t WLL, EN 13155

Steel, bolted modular constructionModular spreader beam
Inquire
Adjustable H-frame with castellated cross beams and a central top lifting lug

Lifting Frames & H-Frames — EN 13155

Structural steel, grade to the design
Inquire
Lattice spreader beam lifting a long pipe on vertical drop slings spaced along its length

Lattice Spreader Beams — 3 t and 6 t, Loads to 44 m, 3 t WLL, EN 13155

Steel lattice, bolted modular sectionsLattice spreader beam
Inquire
Fixed lifting beam with a single central top lug and bottom plates drilled for shackles

Fixed Lifting Beams — EN 13155

Structural steel, grade to the design
Inquire
Fixed-length spreader beam with a self-locking hook at each end for direct rigging

Fixed & Custom Spreader Beams — EN 13155

Structural steel, grade to the design
Inquire
Counterweight lifting beam on a two-leg chain sling with the load hung beneath the beam

Counterweight Lifting Beams — EN 13155

Structural steel, grade to the design
Inquire
C-hook lifting beam with three top lifting points and a long lower arm

C-Hooks — EN 13155

Structural steel, grade to the design
Inquire
Radial bolt-on lifting frame: cross arms on a slotted flange ring with a central top shackle

Bolt-On Lifting Tools — EN 13155

Structural steel, grade to the design
Inquire
Modular lifting beam in lifting-beam configuration with a central top shackle and bottom eyes

Multi-Configuration Modular Lifting Beam — 16 t Beam, 23 t Semi-Spreader

Modular lifting beam (multi-configuration)Steel, bolted standard sections and adaptors
Inquire
Mobile A-frame gantry on castors with height-adjustable legs

Gantries, Jib Cranes & Davits

Structural steel, grade to the design
Inquire
Adjustable forklift boom with fork pockets and a hook at the end of the jib

Forklift Lifting Attachments

Structural steel, grade to the design
Inquire

Questions we get asked

About this range

01Can I lift from the middle of a spreader beam?
No. A spreader beam is designed to carry compression between its two end links, and a load hung from a strut would put it in bending. If the load needs a central or intermediate lifting point, use a lifting beam.
02What is the sling-to-vertical (STV) angle?
The angle each top sling leg makes with the vertical. The larger it is, the more compression the beam carries and the lower its rated load, so spreader beam charts give the load at 45°, 30° and 20° STV and the shortest top sling that keeps the angle within each limit.
03Do these products ship from stock in Dubai?
No. Standard modular systems ship from the maker's stock and engineered equipment is built to order, so we confirm the lead time with each quotation.