Large-Diameter Finned Pipe

Helical solid or serrated steel fins welded to large-bore pipe, NPS 4 to 8, for heater coils, waste-heat recovery and process heaters where flow needs a bigger bore than finned tube gives. Made to ASTM A106, ASTM A335, ASTM A312. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Large-Diameter Finned Pipe
- Standards: ASTM A106, ASTM A335, ASTM A312, ASTM A333, ASTM A53, ASTM B163, ASTM B705, DIN 1629 (superseded by EN 10216-1), DIN 17175 (superseded by EN 10216-2), DIN 2440
- Base tube material: A106 B; A335 P5/P9/P11/P22; A312 TP304H/321H/347H
- Fin material: CS; 11–13Cr; Stainless
- Wall thickness: up to 16.0 (0.630 in)
- Maximum service temperature: Set by fin material; fired-heater fin-tip limits per API 560: carbon steel 454 °C, 2¼Cr / 5Cr 549 °C, 25Cr-20Ni 982 °C
- Product type
- Large-Diameter Finned Pipe
- Base tube material
- A106 B; A335 P5/P9/P11/P22; A312 TP304H/321H/347H
- Fin material
- CS; 11–13Cr; Stainless
Product description
Helical solid or serrated steel fins welded to large-bore pipe, NPS 4 to 8, for heater coils, waste-heat recovery and process heaters where flow needs a bigger bore than finned tube gives.
Specification
- Maximum service temperature: Set by fin material; fired-heater fin-tip limits per API 560: carbon steel 454 °C, 2¼Cr / 5Cr 549 °C, 25Cr-20Ni 982 °C
- Wall (mm): up to 16.0 (0.630 in)
- Fin: HF-welded or GMAW helical, solid or serrated; same fin ranges as HF-welded spiral fin tubes
Standards
ASTM A106, ASTM A335, ASTM A312, ASTM A333, ASTM A53, ASTM B163, ASTM B705, DIN 1629 (superseded by EN 10216-1), DIN 17175 (superseded by EN 10216-2), DIN 2440, EN 10025, EN 10216. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: A106 B; A335 P5/P9/P11/P22; A312 TP304H/321H/347H
- Fins: CS; 11–13Cr; Stainless
Testing and documents
- Hydrotest per pipe spec
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Fired-heater convection and waste-heat recovery coils
Sizes
1 size, each under its own Indus part number in the size table. The table gives the range as limits; any size inside it is made to order.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the fin type, material, height, thickness and fins per inch, and the bare length at each end. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Large-Diameter Finned Pipe |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM A106, ASTM A335, ASTM A312, ASTM A333, ASTM A53, ASTM B163, ASTM B705, DIN 1629 (superseded by EN 10216-1), DIN 17175 (superseded by EN 10216-2), DIN 2440 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | A106 B; A335 P5/P9/P11/P22; A312 TP304H/321H/347H |
| Fin material | CS; 11–13Cr; Stainless |
Dimensions
| Parameter | Value |
|---|---|
| Wall thickness | up to 16.0 (0.630 in) |
| Length | Random or fixed lengths; cut to length on request |
| Size table | Size range — discrete sizes on request |
Performance
| Parameter | Value |
|---|---|
| Maximum service temperature | Set by fin material; fired-heater fin-tip limits per API 560: carbon steel 454 °C, 2¼Cr / 5Cr 549 °C, 25Cr-20Ni 982 °C |
Quality
| Parameter | Value |
|---|---|
| Testing | Hydrotest per pipe spec |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Fired-heater convection and waste-heat recovery coils |
Shipping & lead time
Sizes & part numbers
1 size- Indus part no.IH-TF-HF-LDP-R1
- O.D. (mm)
- 114.3–219.1
- O.D. (in)
- 4–8 NPS
- Wall (mm)
- up to 16.0
- Fin height (mm)
- 9.5–31.75
- Fin thickness (mm)
- 0.89–3.05
- Fins per inch
- 1–6
- Max. length (m)
- 18.3
O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. Wall (mm) — Wall thickness in millimetres: minimum or average wall per the governing standard and the order. Fin height (mm) — Height of the fin above the tube surface in millimetres. Fin thickness (mm) — Fin strip or plate thickness in millimetres. Fins per inch — Fin density in fins per inch; a band means any density in it can be made. Max. length (m) — Longest single length usually made, in metres; longer on request.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What is large-diameter finned pipe used for?▾
What pipe sizes does large-diameter finned pipe cover?▾
What does the part number IH-TF-HF-LDP-R1 mean?▾
What is the maximum temperature of large-diameter finned pipe?▾
Which materials are available for large-diameter finned pipe?▾
Which standards apply to large-diameter finned pipe?▾
What tests and certificates come with large-diameter finned pipe?▾
Large-diameter finned pipe or HF welded spiral fin tube?▾
Where is large-diameter finned pipe used?▾
What should I send to quote large-diameter finned pipe?▾
Which shelf lists other spiral finned tubes?▾
Do you supply large-diameter finned pipe from Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog

