Ferritic and Martensitic Stainless U-Bend Tubes

U-tubes in ferritic and martensitic stainless steel to ASTM A268 and A803, for feedwater heaters and exchangers where chloride stress-corrosion cracking rules out the austenitic grades. Made to ASTM A268, ASTM A803, EN 10297-2. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Ferritic and Martensitic Stainless U-Bend Tubes
- Construction: Bent from straight seamless or welded tube
- Standards: ASTM A268, ASTM A803, EN 10297-2, JIS G3463
- Base tube material: TP405; TP409; TP410; TP439; S44660
- Outside diameter: 19.05–25.4 mm
- Wall thickness: 1.65–2.11 mm
- Product type
- Ferritic and Martensitic Stainless U-Bend Tubes
- Construction
- Bent from straight seamless or welded tube
- Base tube material
- TP405; TP409; TP410; TP439; S44660
Product description
U-tubes in ferritic and martensitic stainless steel to ASTM A268 and A803, for feedwater heaters and exchangers where chloride stress-corrosion cracking rules out the austenitic grades.
Specification
- Minimum bend radius: 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD
- Wall thinning at the bend: Per the governing specification on the order (ASTM A688 / TEMA, or A556 / B395) — no single percentage
- Bend heat treatment: To order: stress-relief or solution anneal of the bend plus ~150 mm of leg (A688), or ≥300 mm where the project specification requires
- Leg length: Up to ~12 m typical; straight tube up to 30 m on request
- Ferritic U-tube grades offered: TP405, TP410 (A268) in U-tube form; 6–50.8 mm OD × 0.7–4.0 mm
- A803 scope: Ferritic stainless FWH tubes incl. U-tubes, 15.9–25.4 mm (5/8–1 in) OD, wall 0.7 mm (0.028 in) and heavier; straight tube for bending furnished annealed
- A803 tests: Tension, hardness, reverse flattening, flange, pressure (hydro or air-underwater), corrosion test on sample
- ASTM A688 scope: Thinning / ovality / leg tolerances: Same TEMA/A688-form rules as austenitic U-tubes unless A803 text says otherwise (A803 clauses not retrieved); Final/bend heat treatment for A268 grades: Reheat ≥650 °C (1200 °F); S41500 ≥510 °C — use as the basis for any bend stress relief
Standards
ASTM A268, ASTM A803, EN 10297-2, JIS G3463. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: TP405; TP409; TP410; TP439; S44660
Testing and documents
- Per A803/A268 + A1016 hydro or NDE
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Feedwater heaters in power plants (A803 TP439)
Sizes
2 sizes, each under its own Indus part number in the size table. The table lists typical sizes for the range; other sizes are made on request.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the bend schedule: centreline radius and leg length for each row, and any heat treatment of the bends. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Ferritic and Martensitic Stainless U-Bend Tubes |
| Construction | Bent from straight seamless or welded tube |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM A268, ASTM A803, EN 10297-2, JIS G3463 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | TP405; TP409; TP410; TP439; S44660 |
Dimensions
| Parameter | Value |
|---|---|
| Outside diameter | 19.05–25.4 mm |
| Wall thickness | 1.65–2.11 mm |
| Length | Random or fixed lengths; cut to length on request |
| Bend radius | 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD |
| Size table | Typical sizes — other sizes on request |
Quality
| Parameter | Value |
|---|---|
| Testing | Per A803/A268 + A1016 hydro or NDE |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Feedwater heaters in power plants (A803 TP439) |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-TF-US-FER-0190-165
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 16
- Wall (mm)
- 1.65
- Indus part no.IH-TF-US-FER-0254-211
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 14
- Wall (mm)
- 2.11
O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. BWG — Birmingham Wire Gauge of the wall, the usual way heat-exchanger tube wall is ordered. Wall (mm) — Wall thickness in millimetres: minimum or average wall per the governing standard and the order.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What are ferritic and martensitic stainless U-bend tubes used for?▾
How are the part numbers such as IH-TF-US-FER-0190-165 read?▾
What sizes do the Ferritic and Martensitic Stainless U-Bend Tubes come in?▾
What bend radius is available on ferritic stainless U-tubes?▾
What tests apply to the Ferritic and Martensitic Stainless U-Bend Tubes under ASTM A803?▾
Which grades are available in the Ferritic and Martensitic Stainless U-Bend Tubes?▾
Which standards and certificates apply to the Ferritic and Martensitic Stainless U-Bend Tubes?▾
What does the Ferritic and Martensitic Stainless U-Bend Tubes connect to?▾
How should bends in the Ferritic and Martensitic Stainless U-Bend Tubes be heat treated?▾
How do the Ferritic and Martensitic Stainless U-Bend Tubes compare with austenitic stainless U-tubes?▾
Can you export the Ferritic and Martensitic Stainless U-Bend Tubes from Dubai?▾
Do you keep the Ferritic and Martensitic Stainless U-Bend Tubes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog

