Size range
Commercial & Transport Chain
Category image · Lifting & Rigging
Category image · Lifting & Rigging



Grade L Short Link Chain — AS 2321, Galvanized, 0.25–5.61 t WLL





Grade 70 Chain Anchor with Delta Ring and Grab Hook — 7.938–9.525 mm

Grade 43 High Test Chain — NACM 1996 / 2003, 1,180–11,140 kg WLL





Grade 30 Long Link Chain — Inch Sizes, 1,300–2,650 lbs WLL


Binder Chain with Hooks — Grade 43 and Grade 70, 2,600–6,600 lbs WLL

Short Link Chain — UK Pattern



Questions we get asked
About this range
- 01Can Grade 30, 43 or 70 chain be used for lifting?
- No. Proof coil (Grade 30), high test (Grade 43) and transport (Grade 70) chain are made for tie-down, towing and general duty. Overhead lifting with chain calls for alloy chain — Grade 80 or Grade 100 — with fittings of the same grade.
- 02Do the parts come with test certificates?
- Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
From the blog
Written about this range
Lifting & rigging
Lever vs ratchet load binders: the kickback hazard, and which to use
A lever binder tensions a chain in one swing of the handle — and can whip back just as fast. A ratchet binder takes longer to tighten but gives twice the mechanical advantage and a controlled release. Both carry the same rating for the same chain size. Here is how they compare and how to use either safely.
4 min read
Lifting & rigging
Chain grades explained: Grade 30, 43, 70, 80 and 100, and which can lift overhead
Chain grade is a statement about the steel, and it decides two things: how much a given size carries, and whether it may be used overhead at all. Grades 30, 43 and 70 are for tie-down and towing. Only alloy Grade 80 and Grade 100 are lifting chain. Here is the whole ladder, with figures from our own tables.
8 min read
Lifting & rigging
Ratchet strap vs chain and binder: securing loads on a truck or trailer
A 50 mm ratchet strap might be rated 2,000 daN, yet tightened by hand it typically pulls only 250 to 500 daN on the load. That gap decides how loads are secured: straps are good for clamping light and finished loads down; chain and binders for heavy, hard-edged ones. Here is how the ratings work and how many tie-downs a load needs.
4 min read
