Size range
Chain Blocks & Manual Hoists
Category image · Lifting & Rigging

Manual Chain Block — Type VL, 0.5–50 t WLL



Manual Chain Block — Type HSZ, 0.5–10 t WLL


Manual Chain Block — Type D, 0.5–30 t WLL

Manual Chain Block — Type CB, 1–10 t WLL






Questions we get asked
About this range
- 01What does "standard lift" mean?
- It is the lift the hoist is supplied with. Longer lifts are made to order; the table gives the extra weight each additional metre of lift adds.
- 02Do the parts come with test certificates?
- Yes. Each consignment ships with the manufacturer's test certificate. If your site needs more — third-party certification or witnessed proof testing — say so on the RFQ and we will confirm what we can arrange.
From the blog
Written about this range
Lifting & rigging
Chain block vs lever hoist vs electric hoist: which to use for the lift
A chain block lifts straight up and down, from overhead. A lever hoist pulls, lifts and tensions in any direction, as long as the pull runs straight hook to hook. An electric hoist does the work for you, all day, rated by duty class. Here is how they compare and which one fits the job.
5 min read
Lifting & rigging
Rigging for plant shutdowns and turnarounds: lifting points, chain blocks and certified kit
A shutdown compresses months of maintenance into weeks, and much of it is lifting: pump motors out, exchanger bundles pulled, valves swapped, in congested units with no room for a crane. The rigging that makes it possible — lifting points, chain blocks, lever hoists, beam clamps and trolleys — how to plan and certify it before the unit comes down, and how to keep the register straight when hundreds of items come and go.
3 min read
Lifting & rigging
Vertical and horizontal plate lifting clamps: pairs, jaw range and when to use each
A vertical clamp grips one plate edge-up; horizontal clamps work in pairs to lift plates flat. How each type grips, why the jaw range and the rating basis matter, and where a beam clamp fits in.
5 min read

