Category
Brass Hose Barbs
Brass hose barbs for clamped low-pressure hose.
Barb or push-lock
A hose barb holds hose with a clamp over the barb; a push-lock barb holds push-lock hose without a clamp. Match the barb to the hose inside diameter.
Thread ends
NPTF ends follow ASME B1.20.3, NPSM ASME B1.20.1, JIC SAE J514 and SAE 45° flare SAE J512.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Brass Hose Barbs across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- Southern Africa
- South Africa, Zimbabwe, Namibia
- South-East Asia
- Singapore, Vietnam, Philippines
Brass Hose Barb × JIC 37° Female Swivel
Category image · Hoses & FittingsBrass Hose Barb × SAE 45° Flare Female Swivel
Brass Hose Barb × SAE 45° Flare Male
Brass Hose Barb × NPTF Male 90° Elbow
Brass Hose Barb × NPSM Female Swivel
Brass Hose Barb × NPTF Male Swivel
Questions we get asked
About this range
- 01What pressure are they rated to?
- The manufacturer publishes no pressure rating for these hose ends. An assembly is rated to the lower of the hose and the end; tell us the hose and working pressure and we will confirm it.