Skip to content
IH-TF-RB-SRB

Return Bends — Short and Long Radius

Return BendsEx-stock · delivery in 3 days
Pile of short-radius 180-degree return bends with plain cut ends
VIEW 01·Pile of short-radius 180-degree return bends with plain cut ends

180° return bends to ASME B16.9 and MSS SP-43, short radius (centre-to-centre 2 × NPS) and long radius (3 × NPS), for furnace coils, serpentines and heater sections. Made to ASME B16.9, MSS SP-43, ASME SA179. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.

Key features

  • Product type: Return Bends
  • Construction: Bent from straight seamless or welded tube
  • Standards: ASME B16.9, MSS SP-43, ASME SA179, ASME SA192, ASME SA210, ASME SA213, ASME SA334, ASME SA335
  • Base tube material: per family: SA179, SA192, SA210, SA213, SA334, SA335
  • Outside diameter: 33.4–114.3 mm
Product type
Return Bends
Construction
Bent from straight seamless or welded tube
Base tube material
per family: SA179, SA192, SA210, SA213, SA334, SA335
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

180° return bends to ASME B16.9 and MSS SP-43, short radius (centre-to-centre 2 × NPS) and long radius (3 × NPS), for furnace coils, serpentines and heater sections.

Specification

  • B16.9 short-radius 180° return, centre-to-centre: 2 × NPS (e.g. NPS 1 = 51 mm, NPS 2 = 102 mm); listed NPS 1–24 only
  • B16.9 long-radius 180° return, centre-to-centre: 3 × NPS from NPS 1 (NPS 1 = 76 mm, NPS 2 = 152 mm, NPS 4 = 305 mm); NPS 1/2 and 3/4 = 76 mm
  • ASTM A688 scope: Tube-size tight bends: 1.5 × OD minimum CL radius is the tight-bend floor makers offer for tube; below that thinning/ovality exceed A688/TEMA basis; Pipe-bend thinning allowance (PFI ES-24): Order wall before bending ≥1.06·tm for 6D radius up to ≥1.25·tm for 3D radius

Standards

ASME B16.9, MSS SP-43, ASME SA179, ASME SA192, ASME SA210, ASME SA213, ASME SA334, ASME SA335. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Materials

  • Tube: per family: SA179, SA192, SA210, SA213, SA334, SA335

Testing and documents

  • Per fitting standard / material spec
  • Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan

Sizes

7 sizes, each under its own Indus part number in the size table. The table lists typical sizes for the range; other sizes are made on request.

Ordering

Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the bend schedule: centreline radius and leg length for each row, and any heat treatment of the bends. We quote with the mill certificates and the inspection you need.

Identification

ParameterValue
Product typeReturn Bends
ConstructionBent from straight seamless or welded tube

Compliance

ParameterValue
StandardsASME B16.9, MSS SP-43, ASME SA179, ASME SA192, ASME SA210, ASME SA213, ASME SA334, ASME SA335

Construction

ParameterValue
Base tube materialper family: SA179, SA192, SA210, SA213, SA334, SA335

Dimensions

ParameterValue
Outside diameter33.4–114.3 mm
LengthRandom or fixed lengths; cut to length on request
Size tableTypical sizes — other sizes on request

Quality

ParameterValue
TestingPer fitting standard / material spec
CertificationMill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations