Skip to content

Dry couplings and transfer equipment for LNG and future fuels.

LNG bunkering, methanol and ammonia transfer, liquid CO₂ for carbon capture, and rDME blended into LPG all need the same thing: a connection that closes before it separates and lets go safely when a vessel or vehicle moves. We supply MannTek dry cryogenic couplings, breakaways, powered emergency release couplings and the hose-string equipment around them, as an authorised MannTek distributor in the UAE.

LNG BUNKERINGMETHANOLAMMONIACARBON CAPTURErDME / LPGAUTHORISED MANNTEK DISTRIBUTOR
Frosted LNG tank outlet with a MannTek DCC hose unit coupled to the tank unit during transfer
-196 °C
DCC SERVICE TEMPERATURE
ISO 21593
SHIP-TO-SHIP BUNKERING STANDARD
SIL2
PERC PLC CONTROL (DNV-GL ASSESSED)
10,000+
CRYOGENIC TEST CYCLES (MANNTEK)

Where we deliver

LNG COUPLINGS

Dry cryogenic couplings

MannTek DCC tank and hose units to ISO/TS 18683 or ISO 21593, for LNG and liquid gases down to -196 °C.

26 part numbers →
BREAKAWAY

Cryogenic breakaway couplings

CBC breaking-bolt and cable-release types. Both halves close as the line separates under excess pull.

19 part numbers →
EMERGENCY RELEASE

Powered Emergency Release Coupling

PERC with three ways of release, including on an ESD signal and by manual override, run by a SIL2-assessed PLC.

5 part numbers →
VESSEL MOVEMENT

Vessel Separation Device

Three wires of different length: an alarm, then ESD 1 to stop pumps and close valves, then ESD 2 to release the PERC.

Quoted to order →
LPG & rDME

Dry gas and rDME couplings

DGC for LPG and other gases, and the rDME coupling for renewable DME blended into LPG, with anticlockwise connection.

14 part numbers →
METHANOL & CHEMICALS

Dry disconnect and Evotek couplings

MannTek lists the DDC among its methanol solutions; the DEC suits chemical and pharmaceutical transfer.

24 part numbers →
TERMINALS

Safety breakaway couplings

SBC breaking-bolt (industrial or marine) and SBC-C cable release, part of MannTek's ammonia and methanol solutions.

25 part numbers →
HOSE STRING

Transfer hose

Composite or stainless steel transfer hose from MannTek, 1" to 10", 10 to 25 bar working pressure.

Quoted to order →
HOSE HANDLING

Saddles, buns, lifting and covers

Single or double hose saddles hold the bend radius on both vessels; hose buns, lifting gear and Kevlar-reinforced covers protect the hose.

Quoted to order →
AFTER ESD 2

Fall arrest and Twin PERC

A friction fall arrest lowers the hose at a steady rate after the PERC releases; Twin PERC releases the purge line too.

Quoted to order →
PURGE & ISOLATION

Purge lines, insulation flanges, spool pieces

Nitrogen purge lines through a spool piece, insulation flanges to break electrical continuity, Y-pieces and reducers.

Quoted to order →
AFTER TRANSFER

Heated parking device

Defrosts and dries the DCC hose unit after an LNG transfer, so it is ready to use again within minutes.

Quoted to order →

LNG & Future Fuels-rated SKUs

All LNG & Future Fuels SKUs →

Quoting a project in LNG & Future Fuels?

Tell our applications team what you're specifying. We reply within one business day with availability, lead time and a fixed-price quote — no obligation.

Plant-down? Call +971 52 2477942 — 24/7

ONE SOURCE

The coupling, the breakaway and the hose string, quoted together.

Indus Hydraulics is an authorised MannTek distributor in the UAE and supplies MannTek equipment direct from MannTek in Sweden. Send the medium, line size, transfer layout and the standard your terminal or vessel specifies, and we put the package together with the quotation.

  • ✓ DCC to ISO/TS 18683 or ISO 21593, matched to the other half
  • ✓ Breaking loads calculated by MannTek for the installation
  • ✓ MannTek operating manuals and service instructions on every product page
  • ✓ Locking devices, sensors and stop-before-disconnect on request
Request a quotation →
MannTek DCC hose unit on a frosted LNG transfer hose, connected at a process manifold