Titanium Tube Sheets

Tube sheets in titanium Grades 1 and 2, solid (ASTM B265 plate, B381 forgings) or explosion-clad on carbon steel, for seawater condensers and desalination plants. Made to ASTM B265 / ASME SB-265, ASTM B381 / ASME SB-381, ASTM B898. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Titanium Tube Sheets
- Construction: Machined from plate or forging to your drawing
- Standards: ASTM B265 / ASME SB-265, ASTM B381 / ASME SB-381, ASTM B898, ISO 2768-fH
- Product type
- Titanium Tube Sheets
- Construction
- Machined from plate or forging to your drawing
Product description
Tube sheets in titanium Grades 1 and 2, solid (ASTM B265 plate, B381 forgings) or explosion-clad on carbon steel, for seawater condensers and desalination plants.
Specification
- Grades: ASTM B265 plate Gr 1 / Gr 2; ASTM B381 forgings F-1 / F-2
- Clad alternative: Ti Gr 1/2 explosion-clad on SA-516-70 for seawater condensers, desalination, PTA, chlor-alkali
- Clad bond shear (reactive metal clad, ASTM B898): min 20,000 psi (137.9 MPa), tested only when Supplementary Requirement S1 is specified
- Typical Ti-steel bond strength: 35,000-45,000 psi shear; backer plate usually >= 3/4 in (19 mm)
- ACHE header choice: Bonnet headers used where the tubesheet is an expensive alloy such as titanium
- Hole fit: Special close fit mandatory with titanium tubes in API 661 headers
- Expansion: 4-5% wall reduction; use expanders with 4 or more rolls to limit tube-end cracking
- Minimum tube pitch: 1.25 x tube OD (triangular or square)
- Tube layout angles: 30 deg (triangular), 60 deg (rotated triangular), 90 deg (square), 45 deg (rotated square)
Standards
ASTM B265 / ASME SB-265, ASTM B381 / ASME SB-381, ASTM B898, ISO 2768-fH. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Testing and documents
- Bond UT
- Bond shear test (B898 S1) if specified
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Seawater condensers in power and desalination plants
- Seawater coolers on offshore and coastal gas facilities
Standard geometry
| Tube OD (in) | Tube OD (mm) | Min pitch 1.25 x OD (in) | Min pitch 1.25 x OD (mm) | Min square pitch with 6.4 mm (1/4 in) cleaning lane (in) | Min square pitch with cleaning lane (mm) |
|---|---|---|---|---|---|
| 5/8 | 15.88 | 0.781 | 19.84 | 0.875 | 22.23 |
| 3/4 | 19.05 | 0.938 | 23.81 | 1.000 | 25.40 |
| 1 | 25.40 | 1.250 | 31.75 | 1.250 | 31.75 |
| 1-1/4 | 31.75 | 1.563 | 39.69 | 1.563 | 39.69 |
| 1-1/2 | 38.10 | 1.875 | 47.63 | 1.875 | 47.63 |
These are the limits of the standard, not part numbers. Each item is made to your drawing.
How we supply
Tube sheets, baffles and plates are made to the purchaser's drawing, so there is no catalogue part number for each size. We cut, machine, drill, ream and groove them from certified plate or forgings, stack-drill baffles and support plates so the holes line up through the bundle, and check hole size, pitch and ligaments against the drawing before dispatch. Send the drawing, or the material, the outside diameter, the thickness, the tube size and the pitch and layout, and we quote with the mill certificates and the inspection you need.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Titanium Tube Sheets |
| Construction | Machined from plate or forging to your drawing |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM B265 / ASME SB-265, ASTM B381 / ASME SB-381, ASTM B898, ISO 2768-fH |
Dimensions
| Parameter | Value |
|---|---|
| Length | Random or fixed lengths; cut to length on request |
| Size table | Made to your drawing; standard geometry in the description |
Quality
| Parameter | Value |
|---|---|
| Testing | Bond UT; Bond shear test (B898 S1) if specified |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Seawater condensers in power and desalination plants; Seawater coolers on offshore and coastal gas facilities |
Shipping & lead time
What are titanium Tube Sheets used for?▾
How do I order the Titanium Tube Sheets when there is no size table?▾
What is the minimum tube pitch for the Titanium Tube Sheets?▾
How strong is the bond on explosion-clad titanium tube sheets?▾
What are the tube hole and expansion details for the Titanium Tube Sheets?▾
Which materials are the Titanium Tube Sheets made from?▾
Which standards and certificates apply to the Titanium Tube Sheets?▾
What goes with the Titanium Tube Sheets in an exchanger?▾
What testing applies to the Titanium Tube Sheets?▾
How do the Titanium Tube Sheets compare with other tube sheet materials?▾
Can you export the Titanium Tube Sheets from Dubai?▾
Do you keep the Titanium Tube Sheets in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog



