Size range
Stainless U-Bend Tubes

Ferritic and Martensitic Stainless U-Bend Tubes

Austenitic Stainless U-Bend Tubes
From the blog
Written about this range
Heat-transfer tubes
U-bend tubes: bend radius, wall thinning and heat treatment
U-tubes are ordered as a bend schedule, not a size. What the minimum bend radius is, how wall thinning and ovality are controlled, when bends are heat treated and tested, and what to put on the order — for carbon, alloy, stainless, nickel-alloy and copper-alloy U-tubes.
4 min read
Heat-transfer tubes
Stainless heat exchanger tube: A213, A249, A268 and A789 grades
Seamless or welded, austenitic, ferritic or duplex: how the four main ASTM stainless tube standards divide up, what each grade is chosen for in refinery, gas-plant and power service, and the tests that come with them.
3 min read
Heat-transfer tubes
Finned and seamless heat-transfer tube: a buyer’s guide
How to specify tube for air coolers, shell-and-tube exchangers, condensers, boilers and fired heaters: the standard and grade, OD and wall, length, fin type and bend schedule — and what to send with an enquiry so the quotation matches the data sheet.
6 min read
