Alloy Steel U-Bend Tubes

U-tubes bent from seamless chrome-moly ASTM A213 T-grade and A209 tube, for high-temperature exchangers and feedwater heaters, to your bend schedule. Made to ASTM A213 / SA-213, ASTM A209, ASTM A1016. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Alloy Steel U-Bend Tubes
- Construction: Bent from straight seamless or welded tube
- Standards: ASTM A213 / SA-213, ASTM A209, ASTM A1016, DIN 17175 (superseded by EN 10216-2), EN 10216-2
- Base tube material: A213 T11; A213 T22; A209 T1; A209 T1a
- Outside diameter: 15.88–25.4 mm
- Wall thickness: 1.24–2.77 mm
- Product type
- Alloy Steel U-Bend Tubes
- Construction
- Bent from straight seamless or welded tube
- Base tube material
- A213 T11; A213 T22; A209 T1; A209 T1a
Product description
U-tubes bent from seamless chrome-moly ASTM A213 T-grade and A209 tube, for high-temperature exchangers and feedwater heaters, to your bend schedule.
Specification
- Minimum bend radius: 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD
- Wall thinning at the bend: Per the governing specification on the order (ASTM A688 / TEMA, or A556 / B395) — no single percentage
- Bend heat treatment: To order: stress-relief or solution anneal of the bend plus ~150 mm of leg (A688), or ≥300 mm where the project specification requires
- Leg length: Up to ~12 m typical; straight tube up to 30 m on request
- Base tube: U-bends are bent from straight A213 T-grade or A209 tube
- A213 straight-tube scope: ID 3.2 mm to OD 127 mm; min wall 0.4–12.7 mm
Standards
ASTM A213 / SA-213, ASTM A209, ASTM A1016, DIN 17175 (superseded by EN 10216-2), EN 10216-2. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: A213 T11; A213 T22; A209 T1; A209 T1a
Testing and documents
- Straight-tube tests per A213/A1016; post-bend heat treatment of Cr-Mo bends agreed on the order
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Feedwater heaters and HX bundles in power plants
Sizes
12 sizes, each under its own Indus part number in the size table. The table lists typical sizes for the range; other sizes are made on request.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the bend schedule: centreline radius and leg length for each row, and any heat treatment of the bends. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Alloy Steel U-Bend Tubes |
| Construction | Bent from straight seamless or welded tube |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM A213 / SA-213, ASTM A209, ASTM A1016, DIN 17175 (superseded by EN 10216-2), EN 10216-2 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | A213 T11; A213 T22; A209 T1; A209 T1a |
Dimensions
| Parameter | Value |
|---|---|
| Outside diameter | 15.88–25.4 mm |
| Wall thickness | 1.24–2.77 mm |
| Length | Random or fixed lengths; cut to length on request |
| Bend radius | 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD |
| Size table | Typical sizes — other sizes on request |
Quality
| Parameter | Value |
|---|---|
| Testing | Straight-tube tests per A213/A1016; post-bend heat treatment of Cr-Mo bends agreed on the order |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Feedwater heaters and HX bundles in power plants |
Shipping & lead time
Sizes & part numbers
12 sizes- Indus part no.IH-TF-UA-AL-0159-124
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UA-AL-0159-165
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UA-AL-0159-211
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
- Indus part no.IH-TF-UA-AL-0159-277
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
- Indus part no.IH-TF-UA-AL-0190-124
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UA-AL-0190-165
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UA-AL-0190-211
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
- Indus part no.IH-TF-UA-AL-0190-277
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
Show all 12 sizesShow fewer sizes
- Indus part no.IH-TF-UA-AL-0254-124
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UA-AL-0254-165
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UA-AL-0254-211
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
- Indus part no.IH-TF-UA-AL-0254-277
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. BWG — Birmingham Wire Gauge of the wall, the usual way heat-exchanger tube wall is ordered. Min. wall (mm) — Minimum wall thickness in millimetres. Min. wall (in) — The same minimum wall in inches.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What are Alloy Steel U-Bend Tubes used for?▾
How do I read an Indus part number for Alloy Steel U-Bend Tubes, such as IH-TF-UA-AL-0159-124?▾
What sizes do Alloy Steel U-Bend Tubes come in?▾
What do I need to send to order Alloy Steel U-Bend Tubes to the right size and grade?▾
How tight can the bends be on Alloy Steel U-Bend Tubes?▾
What tests and certificates come with Alloy Steel U-Bend Tubes?▾
Which materials and grades are Alloy Steel U-Bend Tubes available in?▾
Which standards apply to Alloy Steel U-Bend Tubes?▾
What do Alloy Steel U-Bend Tubes connect to or fit with?▾
How should Alloy Steel U-Bend Tubes be inspected on receipt and stored?▾
How are Alloy Steel U-Bend Tubes shipped, and can they be exported from Dubai?▾
Do you keep Alloy Steel U-Bend Tubes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Heat-transfer tubes
U-bend tubes: bend radius, wall thinning and heat treatment
U-tubes are ordered as a bend schedule, not a size. What the minimum bend radius is, how wall thinning and ovality are controlled, when bends are heat treated and tested, and what to put on the order — for carbon, alloy, stainless, nickel-alloy and copper-alloy U-tubes.
4 min read
Heat-transfer tubes
A179 vs A192 vs A210 vs A213: choosing boiler and exchanger tube
Four ASTM standards cover most carbon and alloy steel tube in exchangers, boilers and superheaters. What each is for, how they differ in chemistry and strength, which tests they carry, and how to choose — with the grade tables.
3 min read
