Skip to content
+971 52 2477942
Indus Hydraulics

Category

Brass BSP & Metric Adapters

British Standard Pipe and metric adapters in brass, for joining BSP and metric ports to NPT and JIC lines.

27 SKUs1 brands

BSPP or BSPT

BSPP (parallel) male studs seal on a bonded seal, washer or cone seat; BSPT (taper) threads seal on the flanks like NPT. The two share a pitch but do not interchange. Where a listing says BSP female without P or T, confirm the mating thread before ordering.

ISO 228-1 and ISO 7-1

BSPP threads are defined by ISO 228-1 and BSPT threads by ISO 7-1. NPT ends follow ASME B1.20.1 and JIC ends SAE J514.

Size range

143orderable sizes
27listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Brass BSP & Metric Adapters across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatchOmanTypically 3 working days from dispatchQatarTypically 3 working days from dispatchBahrainTypically 3 working days from dispatchKuwaitTypically 3 working days from dispatch

Beyond the Gulf

South-East Asia
Singapore, Indonesia, Thailand
North Africa
Egypt, Algeria, Tunisia

See every export destination

Showing 1–27 of 27 SKUs

Sort
LatestA–ZZ–A
Line drawing of the brass NPT male × metric male adapter, ends numbered as in the size table
IH-BR-8607

Brass NPT Male × Metric Male Adapter

Indus Hydraulicstaper pipe thread that seals on the thread flanks, with sealant or tapeNPT, 1/8" to 1/2" (1/8-27 to 1/2-14)
Line drawing of the aluminium sealing washer for BSP threads
IH-BR-8400

Aluminium Sealing Washer for BSP Threads

Indus HydraulicsBSPP, 1/8" to 1/2" (G1/8-28 to G1/2-14)BSP parallel thread, sealed by a bonded seal, washer or cone seat rather than on the thread
Line drawing of the brass metric male × NPT female adapter, ends numbered as in the size table
IH-BR-8235

Brass Metric Male × NPT Female Adapter

Indus Hydraulicsmetric thread; the manufacturer gives the diameter only, so confirm the pitch before orderingstraight adapter
Line drawing of the brass BSP female cross, ends numbered as in the size table
IH-BR-8097

Brass BSP Female Cross

Indus HydraulicsBSP, 1/4" (1/4-19)cross
Line drawing of the brass BSP female × BSPT male run tee, ends numbered as in the size table
IH-BR-8095

Brass BSP Female × BSPT Male Run Tee

Indus Hydraulicsrun teeBSPT, 1/8" to 1/2" (R1/8-28 to R1/2-14)
Line drawing of the brass BSP female × BSPT male branch tee, ends numbered as in the size table
IH-BR-8093

Brass BSP Female × BSPT Male Branch Tee

Indus HydraulicsBSP, 1/8" to 3/4" (1/8-28 to 3/4-14)BSP female thread; the manufacturer does not say parallel or taper, so confirm the mating thread before ordering
Line drawing of the brass BSPT male × BSP female run tee, ends numbered as in the size table
IH-BR-8090

Brass BSPT Male × BSP Female Run Tee

Indus HydraulicsBSP taper thread that seals on the thread flanksrun tee
Line drawing of the brass BSPT male × BSP female branch tee, ends numbered as in the size table
IH-BR-8087

Brass BSPT Male × BSP Female Branch Tee

Indus Hydraulicsbranch teeBSPT, 1/4" (R1/4-19)
Line drawing of the brass BSP female tee, ends numbered as in the size table
IH-BR-8085

Brass BSP Female Tee

Indus HydraulicsBSP female thread; the manufacturer does not say parallel or taper, so confirm the mating thread before orderingBSP, 1/8" to 3/4" (1/8-28 to 3/4-14)
Line drawing of the brass BSPT male tee, ends numbered as in the size table
IH-BR-8080

Brass BSPT Male Tee

Indus HydraulicsBSPT, 1/8" to 3/4" (R1/8-28 to R3/4-14)BSP taper thread that seals on the thread flanks
Line drawing of the brass BSP female 90° elbow, ends numbered as in the size table
IH-BR-8075

Brass BSP Female 90° Elbow

Indus HydraulicsBSP, 1/8" to 3/4" (1/8-28 to 3/4-14)90° elbow
Line drawing of the brass BSPT male × BSP female 90° elbow, ends numbered as in the size table
IH-BR-8060

Brass BSPT Male × BSP Female 90° Elbow

Indus Hydraulics90° elbowBSPT, 1/8" to 3/4" (R1/8-28 to R3/4-14)
Line drawing of the brass BSPT male 90° elbow, ends numbered as in the size table
IH-BR-8055

Brass BSPT Male 90° Elbow

Indus HydraulicsBSPT, 1/8" to 3/4" (R1/8-28 to R3/4-14)90° elbow
Line drawing of the brass BSPT male × BSPT female 45° elbow, ends numbered as in the size table
IH-BR-8047

Brass BSPT Male × BSPT Female 45° Elbow

Indus Hydraulics45° elbowBSPT, 1/8" (R1/8-28)
Line drawing of the brass BSP female × NPT female adapter, ends numbered as in the size table
IH-BR-8044

Brass BSP Female × NPT Female Adapter

Indus HydraulicsBSP, 1/8" to 1-1/2" (1/8-28 to 1-1/2-11)BSP female thread; the manufacturer does not say parallel or taper, so confirm the mating thread before ordering
Line drawing of the brass BSP female coupling, ends numbered as in the size table
IH-BR-8043

Brass BSP Female Coupling

Indus Hydraulicsstraight couplingBSP, 1/8" to 2" (1/8-28 to 2-11)
Line drawing of the brass BSPP male × BSP female bushing, ends numbered as in the size table
IH-BR-8039

Brass BSPP Male × BSP Female Bushing

Indus HydraulicsBSPP, 1/8" to 3/4" (G1/8-28 to G3/4-14)BSP parallel thread, sealed by a bonded seal, washer or cone seat rather than on the thread
Line drawing of the brass BSPT male × BSP female adapter, ends numbered as in the size table
IH-BR-8038

Brass BSPT Male × BSP Female Adapter

Indus HydraulicsBSP taper thread that seals on the thread flanksBSPT, 1/8" to 1" (R1/8-28 to R1-11)
Line drawing of the brass NPT male × BSPT female adapter, ends numbered as in the size table
IH-BR-8037T

Brass NPT Male × BSPT Female Adapter

Indus Hydraulicsstraight adaptertaper pipe thread that seals on the thread flanks, with sealant or tape
Line drawing of the brass NPT male × BSP female adapter, ends numbered as in the size table
IH-BR-8037

Brass NPT Male × BSP Female Adapter

Indus Hydraulicsstraight adapterNPT, 1/8" to 3/4" (1/8-27 to 3/4-14)
Line drawing of the brass BSP female cap
IH-BR-8033

Brass BSP Female Cap

Indus HydraulicscapBSP, 1/8" to 3/4" (1/8-28 to 3/4-14)
Line drawing of the brass BSPT countersunk plug
IH-BR-8030CSP

Brass BSPT Countersunk Plug

Indus HydraulicsBSP taper thread that seals on the thread flanksBSPT, 1/8" to 1" (R1/8-28 to R1-11)
Line drawing of the brass BSPP countersunk sealed plug
IH-BR-8028

Brass BSPP Countersunk Sealed Plug

Indus HydraulicsBSP parallel thread, sealed by a bonded seal, washer or cone seat rather than on the threadBSPP, 1/8" to 1/2" (G1/8-28 to G1/2-14)
Line drawing of the brass BSPT male × NPT male adapter, ends numbered as in the size table
IH-BR-8008

Brass BSPT Male × NPT Male Adapter

Indus Hydraulicsstraight adapterBSPT, 1/8" to 1" (R1/8-28 to R1-11)
Line drawing of the brass BSPP male × NPT male adapter, ends numbered as in the size table
IH-BR-8007

Brass BSPP Male × NPT Male Adapter

Indus Hydraulicsstraight adapterBSPP, 1/4" to 2" (G1/4-19 to G2-11)
Line drawing of the brass JIC 37° male × BSPP male adapter, ends numbered as in the size table
IH-BR-8005

Brass JIC 37° Male × BSPP Male Adapter

Indus Hydraulicsstraight adapter37° JIC, 3/8" to 3/4" (9/16-18 to 1-1/16-12)
Line drawing of the brass BSPP male × BSPP male adapter, ends numbered as in the size table
IH-BR-8000

Brass BSPP Male × BSPP Male Adapter

Indus Hydraulicsstraight adapterBSPP, 1/8" to 1-1/2" (G1/8-28 to G1-1/2-11)

Questions we get asked

About this range

01What are they made from?
Brass. Each listing gives the alloy where the manufacturer states it, such as CA360 free-machining brass (C36000).
02Do the listings show part numbers and sizes?
Yes: every size has its own Indus part number, with the size and thread on each end in the size table.
03Do you list sealing washers?
Yes: aluminium sealing washers for BSP parallel-thread male studs, 1/8" to 1/2", are listed in this category.
04What pressure are they rated to?
The manufacturer publishes no pressure rating for this range. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.