Skip to content
+971 52 2477942
Indus Hydraulics
Lane DXB → RW

Export from Dubai

RW

Hydraulic & industrial hose supplier in Rwanda

Indus Hydraulics supplies Rwanda from Dubai: containers sail from Jebel Ali to Mombasa and travel the Northern Corridor through Uganda and Gatuna to Kigali in typically 28–35 days, with Dar es Salaam and the Central Corridor through Rusumo as the alternative. Urgent parts fly into Kigali in four to six days. Regulated goods carry a certificate of conformity verified before shipment, alongside Kenyan and Ugandan transit documents, so the part list is fixed at quotation.

Typical transit
Typically 28–35 days via Mombasa and Gatuna · 32–40 days via Dar es Salaam and Rusumo · 4–6 days by air into Kigali
Freight
Sea to Mombasa then the Northern Corridor · Dar es Salaam and the Central Corridor as an alternative · Air freight into Kigali where the schedule is tighter
Incoterms 2020
DAP Kigali or the buyer’s site · CIF Mombasa · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
Certificate of conformity for regulated goods, verified before shipment · Kenyan and Ugandan transit documents · Certificate of Origin, Dubai Chamber attested
Request an export quote WhatsApp usEmail sales@indushydraulics.me
Fig. 01 · Export lane DXB → RWMercator · WGS 84
GATUNAKIGALIMUSANZERUBAVUHUYERUSIZINYAGATARERWAMAGANA29°E30°E31°E2°S1°SN50 KMSEA + ROAD · 5,690 KM · FROM JEBEL ALI · DXB
Border crossingDelivery citysea + road corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Sea + road
Border crossing
Gatuna
Transit
28–35 days
Quoted in
USD
Docs prepared
Before the vessel sails
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Rwanda prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Rwanda

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp
01

Hoses & Fittings supplier in Rwanda

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges
A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front
02

Industrial Hoses supplier in Rwanda

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges
A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block
03

Lifting & Rigging supplier in Rwanda

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges
A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve
06

Oilfield Valves supplier in Rwanda

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges
A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front
07

Flow Iron & Wellhead supplier in Rwanda

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges
A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body
08

Valves & Manifolds supplier in Rwanda

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front
09

Blowout Preventers (BOP) supplier in Rwanda

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box
10

Instrumentation & Controls supplier in Rwanda

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges
A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid
11

Well Testing Equipment supplier in Rwanda

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges
A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side
12

Fracturing Equipment supplier in Rwanda

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges
A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets
20

Hydraulic Tools & Bolting supplier in Rwanda

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges

Export quote · RW

Send the part list for Rwanda

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Rwanda

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Rwanda are declared under.

Freight

Three ways in, priced per shipment

Sea + road, via Mombasa28–35 days
Northern Corridor through GatunaDefault for most orders
Air freight4–6 days
DXB to KGLWhen the line is down
Sea + road, via Dar32–40 days
Central Corridor through RusumoAlternative when Mombasa is congested

Sequence

How an order to Rwanda works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in USD against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once accepted, conformity and corridor transit documents are arranged before the container is loaded.
  4. 04Goods sail to Mombasa and move inland by road, with the paperwork and tracking together.

Industries

Who we supply in Rwanda

Close-up of a mining shovel’s hydraulic boom cylinders and hoses as it loads a haul truck in an open-pit mine
mining

Mining in Rwanda

Dust-rated valves, four-spiral hose, high-cycle cylinders and crusher-duty components for cassiterite, coltan and wolframite mining and processing, and for the quarries supplying aggregate to construction around Kigali.

Industry page
An excavator’s boom cylinders and hydraulic hoses on a construction site, a hazy city skyline behind
construction

Construction in Rwanda

Excavator, crane and batching-plant hydraulics for road contracts, the new Bugesera international airport, the Kigali Special Economic Zone and the building programme across Kigali City.

Industry page
Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath
power

Power & Energy in Rwanda

Gate operators and governor hydraulics for hydropower such as Nyabarongo and the shared Rusumo Falls station, plus valves, hose and fittings for the Lake Kivu methane-to-power plants at Karongi and Rubavu.

Industry page
A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset
oil · gas

Oil & Gas in Rwanda

Hose assemblies, couplings and loading equipment for the fuel depots and terminals around Kigali that receive road tankers over the Northern and Central Corridors.

Industry page
A glowing steel strip passing through a hot rolling mill stand with its hydraulic cylinders and tubing
steel

Steel & Metals in Rwanda

High-force cylinders and servo valves for the steel rolling, roofing and fabrication plants in the Kigali Special Economic Zone and the wider manufacturing base around the capital.

Industry page
A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon
marine

Marine & Offshore in Rwanda

Cargo handling hydraulics for the Lake Kivu ports at Rubavu, Karongi and Rusizi, and for the inland dry ports and logistics platforms around Kigali.

Industry page

Brands stocked for Rwanda

Delivery coverage

Cities and sites we deliver to in Rwanda

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

  • Kigali

    Kigali City

  • Musanze

    Northern Province

  • Rubavu

    Western Province

  • Huye

    Southern Province

  • Rusizi

    Western Province

  • Nyagatare

    Eastern Province

  • Rwamagana

    Eastern Province

  • Muhanga

    Southern Province

  • Karongi

    Western Province

  • Kayonza

    Eastern Province

  • Bugesera

    Eastern Province

  • Gatuna

    Northern Province

Questions we get asked

Supplying Rwanda, in detail

01

Who supplies hydraulic hose and fittings to Kigali from Dubai?

Indus Hydraulics ships hydraulic hose, fittings, adapters, valves and industrial hose from Dubai to Rwanda. Containers sail from Jebel Ali to Mombasa and travel the Northern Corridor through Uganda, entering Rwanda at Gatuna, in typically 28–35 days. Urgent parts fly from Dubai to Kigali in four to six days. A certificate of conformity for regulated goods is verified before the vessel sails.

02

Why does a shipment to Rwanda take four to five weeks?

Because the road leg is about fifteen hundred kilometres from Mombasa and crosses two transit countries. The container clears as Kenyan transit at Mombasa, as Ugandan transit on the corridor and as a Rwandan import at Gatuna. The sea leg is predictable; the road leg is where the variation sits, so every quotation names the point where our responsibility ends.

03

Mombasa or Dar es Salaam for Rwanda cargo?

Mombasa for most orders: the Northern Corridor through Gatuna runs typically 28–35 days. Dar es Salaam and the Central Corridor, entering Rwanda at Rusumo, runs 32–40 days and is the alternative when Mombasa is congested. When the order is large enough for the difference to matter, we quote both routes so you can compare.

04

Who arranges the conformity certificate for Rwanda?

We do, through an appointed inspection body, before the container sails. The certificate covers the regulated lines on the consignment and is issued before loading, so the part list has to be complete at quotation rather than at order. We confirm the full list with you before verification starts.

05

What documents travel with a container to Kigali?

The certificate of conformity verified before shipment; Kenyan and Ugandan transit documents raised by the nominated forwarder on the corridor; the import declaration, lodged by the consignee or clearing agent before arrival; and a Certificate of Origin attested by the Dubai Chamber. Material and test certificates from the mill or our test bench are added where the order calls for them.

06

Can you deliver beyond Kigali, to Rubavu, Musanze or Rusizi?

Yes, on DAP terms to the site gate. Rwanda is compact, so the inland leg beyond Kigali is short, but it is still quoted rather than estimated. That covers the Lake Kivu towns of Rubavu, Karongi and Rusizi, the Northern Province around Musanze and the Eastern Province. Buyers with their own clearing agent can take delivery CIF Mombasa instead.

07

Can you supply mining and quarry operations in Rwanda?

Yes. Dust-rated valves, four-spiral hose, high-cycle cylinders and crusher-duty components suit cassiterite, coltan and wolframite operations and the aggregate quarries around Kigali. On a 28–35 day lane, tell us what the failed part fits and we list the seals, fittings and mating halves that normally wear with it, so one shipment covers the whole repair.

08

Do you crimp hose assemblies before they leave Dubai?

Yes. Assemblies are crimped and pressure-tested in Dubai and shipped as finished items, tagged with the hose, the fittings and the test date. Send the hose standard you specify — SAE J517, EN 853, EN 856 or ISO 18752 — with the end fittings and cut length, and the assemblies arrive in Kigali ready to fit, with no crimping needed on site.

09

Do you supply hydraulics for hydropower and the Lake Kivu methane plants?

Yes. Gate operators and governor hydraulics for hydropower stations, and valves, high-pressure hose and fittings for the methane-to-power plants on Lake Kivu at Karongi and Rubavu. Material and test certificates come from the mill or our test bench where the order calls for them, and we quote DAP to site or CIF Mombasa.

10

Is air freight into Kigali available for urgent parts?

Yes, typically four to six days from Dubai to Kigali, quoted per shipment. It bypasses the 28–35 day sea-and-road lane, which makes it the right choice when a machine is down and an expensive one for planned maintenance stock. A mixed order can be split, with urgent lines by air and the rest following by sea and road.

11

How do I request a quotation from Rwanda?

Send the part numbers or specifications, quantities and the delivery point. We quote in USD on the Incoterm you choose — DAP Kigali or your site, CIF Mombasa, FOB Jebel Ali, or EXW Dubai for a nominated forwarder — and confirm the lead time per consignment, because the conformity verification and the corridor schedule both depend on the order.

Next step

Shipping to Rwanda?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in USD, with the Incoterm stated rather than assumed.

WhatsApp usEmail the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · RW

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets