Do these fit metric tube?

No: they are for inch outside-diameter tube. For metric tube use the DIN 2353 range.

Flareless Bite-Type Tube Fittings (SAE J514)

Flareless bite-type fittings for inch outside-diameter hydraulic tube, in zinc-plated steel.

30 SKUs1 brands

Flareless or flared

A flareless fitting grips plain-end tube with a sleeve that bites in as the nut is made up, so no flaring tool is needed. Choose by tube O.D., then by the other end. Keep nuts and sleeves from the same range as the bodies.

SAE J514

Flareless bite-type tube fittings are covered by SAE J514. ORB ends follow SAE J1926 and pipe-thread ends ASME B1.20.3.

Size range

268orderable sizes

30listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Flareless Bite-Type Tube Fittings (SAE J514) across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatch OmanTypically 3 working days from dispatch QatarTypically 3 working days from dispatch BahrainTypically 3 working days from dispatch KuwaitTypically 3 working days from dispatch

Beyond the Gulf