Casing and Tubing — API 5CT

Seamless casing and tubing to API 5CT / ISO 11960 in J55, K55 and N80 and other grades, non-upset or external-upset tubing and casing with short, long or buttress threads, by OD and nominal weight. Made to API 5CT / ISO 11960, API 5B. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Casing and Tubing
- Construction: Seamless, cold drawn or hot finished
- Standards: API 5CT / ISO 11960, API 5B
- Base tube material: J55; K55; N80-1; N80Q
- Outside diameter: 60.32–339.72 mm
- Wall thickness: 4.24–12.19 mm
- Product type
- Casing and Tubing
- Construction
- Seamless, cold drawn or hot finished
- Base tube material
- J55; K55; N80-1; N80Q
Product description
Seamless casing and tubing to API 5CT / ISO 11960 in J55, K55 and N80 and other grades, non-upset or external-upset tubing and casing with short, long or buttress threads, by OD and nominal weight.
Specification
- J55 vs K55: Same yield band 379–552 MPa; tensile 517 MPa (J55) vs 655 MPa (K55)
- N80 Type 1 vs N80Q: Both 552–758 MPa yield, 689 MPa tensile; N80Q is quenched and tempered, N80-1 normalized
- Chemistry, J55/K55/N80: Only P ≤0.030 and S ≤0.030 specified
- Tubing sizes covered (OD): 2-3/8, 2-7/8, 3-1/2, 4, 4-1/2 in (60.33, 73.03, 88.90, 101.60, 114.30 mm)
- Common casing sizes (OD): 4-1/2, 5-1/2, 7, 8-5/8, 9-5/8, 10-3/4, 13-3/8 in (114.30–339.72 mm)
- Tubing end finishes: Non-upset (NU) and external-upset (EU) threaded and coupled; EU nominal weight is slightly higher than NU for the same wall (e.g. 2-7/8 in 0.217 in wall: 6.40 NU / 6.50 EU)
- Casing end-finish codes: P plain end, S short round thread (STC), L long round thread (LTC), B buttress (BTC), E extreme-line
- OD tolerance: ±0.79 mm (±0.031 in) below 4-1/2 in OD; −0.5 % / +1.0 % of OD at 4-1/2 in and above
- Wall tolerance: −12.5 %; upper limit controlled by mass
- Mass tolerance (single length): −3.5 % / +6.5 %
- Grade by row: J55 is offered on the lighter tubing walls (4.70, 6.50, 9.30, 12.75 lb/ft EU); heavier tubing walls (5.95, 7.90, 8.70 lb/ft) are listed for N80/L80 and up, not J55
Standards
API 5CT / ISO 11960, API 5B. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: J55; K55; N80-1; N80Q
Testing and documents
- Drift test with API drift mandrel
- Hydrostatic test per API 5CT
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Onshore and offshore well casing and production tubing
- Onshore and offshore well casing strings and production tubing
Sizes
33 sizes, each under its own Indus part number in the size table. These are the common sizes; others are made on request.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Casing and Tubing |
| Construction | Seamless, cold drawn or hot finished |
Compliance
| Parameter | Value |
|---|---|
| Standards | API 5CT / ISO 11960, API 5B |
Construction
| Parameter | Value |
|---|---|
| Base tube material | J55; K55; N80-1; N80Q |
Dimensions
| Parameter | Value |
|---|---|
| Outside diameter | 60.32–339.72 mm |
| Wall thickness | 4.24–12.19 mm |
| Length | Random or fixed lengths; cut to length on request |
| Size table | Common sizes |
Quality
| Parameter | Value |
|---|---|
| Testing | Drift test with API drift mandrel; Hydrostatic test per API 5CT |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Onshore and offshore well casing and production tubing; Onshore and offshore well casing strings and production tubing |
Shipping & lead time
Sizes & part numbers
33 sizes- Indus part no.IH-TF-LP-OCT-T0603-0400
- Type
- Tubing
- O.D. (mm)
- 60.32
- O.D. (in)
- 2.375
- Wall (mm)
- 4.24
- Wall (in)
- 0.167
- Nominal weight (lb/ft)
- 4.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 3.94
- Grades
- J55, N80
- Indus part no.IH-TF-LP-OCT-T0603-0460
- Type
- Tubing
- O.D. (mm)
- 60.32
- O.D. (in)
- 2.375
- Wall (mm)
- 4.83
- Wall (in)
- 0.190
- Nominal weight (lb/ft)
- 4.60
- Upset weight (lb/ft)
- 4.70
- Plain-end weight (lb/ft)
- 4.43
- Grades
- J55, N80
- Indus part no.IH-TF-LP-OCT-T0603-0580
- Type
- Tubing
- O.D. (mm)
- 60.32
- O.D. (in)
- 2.375
- Wall (mm)
- 6.45
- Wall (in)
- 0.254
- Nominal weight (lb/ft)
- 5.80
- Upset weight (lb/ft)
- 5.95
- Plain-end weight (lb/ft)
- 5.75
- Grades
- N80
- Indus part no.IH-TF-LP-OCT-T0730-0640
- Type
- Tubing
- O.D. (mm)
- 73.02
- O.D. (in)
- 2.875
- Wall (mm)
- 5.51
- Wall (in)
- 0.217
- Nominal weight (lb/ft)
- 6.40
- Upset weight (lb/ft)
- 6.50
- Plain-end weight (lb/ft)
- 6.16
- Grades
- J55, N80
- Indus part no.IH-TF-LP-OCT-T0730-0780
- Type
- Tubing
- O.D. (mm)
- 73.02
- O.D. (in)
- 2.875
- Wall (mm)
- 7.01
- Wall (in)
- 0.276
- Nominal weight (lb/ft)
- 7.80
- Upset weight (lb/ft)
- 7.90
- Plain-end weight (lb/ft)
- 7.66
- Grades
- N80
- Indus part no.IH-TF-LP-OCT-T0730-0860
- Type
- Tubing
- O.D. (mm)
- 73.02
- O.D. (in)
- 2.875
- Wall (mm)
- 7.82
- Wall (in)
- 0.308
- Nominal weight (lb/ft)
- 8.60
- Upset weight (lb/ft)
- 8.70
- Plain-end weight (lb/ft)
- 8.44
- Grades
- N80
- Indus part no.IH-TF-LP-OCT-T0889-0770
- Type
- Tubing
- O.D. (mm)
- 88.90
- O.D. (in)
- 3.500
- Wall (mm)
- 5.49
- Wall (in)
- 0.216
- Nominal weight (lb/ft)
- 7.70
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 7.58
- Grades
- J55, N80
- Indus part no.IH-TF-LP-OCT-T0889-0920
- Type
- Tubing
- O.D. (mm)
- 88.90
- O.D. (in)
- 3.500
- Wall (mm)
- 6.45
- Wall (in)
- 0.254
- Nominal weight (lb/ft)
- 9.20
- Upset weight (lb/ft)
- 9.30
- Plain-end weight (lb/ft)
- 8.81
- Grades
- J55, N80
Show all 33 sizesShow fewer sizes
- Indus part no.IH-TF-LP-OCT-T0889-1020
- Type
- Tubing
- O.D. (mm)
- 88.90
- O.D. (in)
- 3.500
- Wall (mm)
- 7.34
- Wall (in)
- 0.289
- Nominal weight (lb/ft)
- 10.20
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 9.91
- Grades
- J55, N80
- Indus part no.IH-TF-LP-OCT-T1016-0950
- Type
- Tubing
- O.D. (mm)
- 101.60
- O.D. (in)
- 4.000
- Wall (mm)
- 5.74
- Wall (in)
- 0.226
- Nominal weight (lb/ft)
- 9.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 9.11
- Grades
- J55, N80
- Indus part no.IH-TF-LP-OCT-T1016-1070
- Type
- Tubing
- O.D. (mm)
- 101.60
- O.D. (in)
- 4.000
- Wall (mm)
- 6.65
- Wall (in)
- 0.262
- Nominal weight (lb/ft)
- 10.70
- Upset weight (lb/ft)
- 11.00
- Plain-end weight (lb/ft)
- 10.46
- Grades
- J55, N80
- Indus part no.IH-TF-LP-OCT-T1143-1260
- Type
- Tubing
- O.D. (mm)
- 114.30
- O.D. (in)
- 4.500
- Wall (mm)
- 6.88
- Wall (in)
- 0.271
- Nominal weight (lb/ft)
- 12.60
- Upset weight (lb/ft)
- 12.75
- Plain-end weight (lb/ft)
- 12.24
- Grades
- J55, N80
- Indus part no.IH-TF-LP-OCT-C1143-0950
- Type
- Casing
- O.D. (mm)
- 114.30
- O.D. (in)
- 4.500
- Wall (mm)
- 5.21
- Wall (in)
- 0.205
- Nominal weight (lb/ft)
- 9.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 9.40
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1143-1050
- Type
- Casing
- O.D. (mm)
- 114.30
- O.D. (in)
- 4.500
- Wall (mm)
- 5.69
- Wall (in)
- 0.224
- Nominal weight (lb/ft)
- 10.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 10.24
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1143-1160
- Type
- Casing
- O.D. (mm)
- 114.30
- O.D. (in)
- 4.500
- Wall (mm)
- 6.35
- Wall (in)
- 0.250
- Nominal weight (lb/ft)
- 11.60
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 11.36
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1143-1350
- Type
- Casing
- O.D. (mm)
- 114.30
- O.D. (in)
- 4.500
- Wall (mm)
- 7.37
- Wall (in)
- 0.290
- Nominal weight (lb/ft)
- 13.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 13.05
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1397-1550
- Type
- Casing
- O.D. (mm)
- 139.70
- O.D. (in)
- 5.500
- Wall (mm)
- 6.98
- Wall (in)
- 0.275
- Nominal weight (lb/ft)
- 15.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 15.36
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1397-1700
- Type
- Casing
- O.D. (mm)
- 139.70
- O.D. (in)
- 5.500
- Wall (mm)
- 7.72
- Wall (in)
- 0.304
- Nominal weight (lb/ft)
- 17.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 16.89
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1397-2000
- Type
- Casing
- O.D. (mm)
- 139.70
- O.D. (in)
- 5.500
- Wall (mm)
- 9.17
- Wall (in)
- 0.361
- Nominal weight (lb/ft)
- 20.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 19.83
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1778-2300
- Type
- Casing
- O.D. (mm)
- 177.80
- O.D. (in)
- 7.000
- Wall (mm)
- 8.05
- Wall (in)
- 0.317
- Nominal weight (lb/ft)
- 23.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 22.65
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1778-2600
- Type
- Casing
- O.D. (mm)
- 177.80
- O.D. (in)
- 7.000
- Wall (mm)
- 9.19
- Wall (in)
- 0.362
- Nominal weight (lb/ft)
- 26.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 25.69
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C1778-2900
- Type
- Casing
- O.D. (mm)
- 177.80
- O.D. (in)
- 7.000
- Wall (mm)
- 10.36
- Wall (in)
- 0.408
- Nominal weight (lb/ft)
- 29.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 28.75
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C2191-2400
- Type
- Casing
- O.D. (mm)
- 219.08
- O.D. (in)
- 8.625
- Wall (mm)
- 6.71
- Wall (in)
- 0.264
- Nominal weight (lb/ft)
- 24.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 23.60
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C2191-3200
- Type
- Casing
- O.D. (mm)
- 219.08
- O.D. (in)
- 8.625
- Wall (mm)
- 8.94
- Wall (in)
- 0.352
- Nominal weight (lb/ft)
- 32.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 31.13
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C2445-3600
- Type
- Casing
- O.D. (mm)
- 244.48
- O.D. (in)
- 9.625
- Wall (mm)
- 8.94
- Wall (in)
- 0.352
- Nominal weight (lb/ft)
- 36.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 34.89
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C2445-4000
- Type
- Casing
- O.D. (mm)
- 244.48
- O.D. (in)
- 9.625
- Wall (mm)
- 10.03
- Wall (in)
- 0.395
- Nominal weight (lb/ft)
- 40.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 38.97
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C2445-4350
- Type
- Casing
- O.D. (mm)
- 244.48
- O.D. (in)
- 9.625
- Wall (mm)
- 11.05
- Wall (in)
- 0.435
- Nominal weight (lb/ft)
- 43.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- see conflicts
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C2730-4050
- Type
- Casing
- O.D. (mm)
- 273.05
- O.D. (in)
- 10.750
- Wall (mm)
- 8.89
- Wall (in)
- 0.350
- Nominal weight (lb/ft)
- 40.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 38.91
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C2730-4550
- Type
- Casing
- O.D. (mm)
- 273.05
- O.D. (in)
- 10.750
- Wall (mm)
- 10.16
- Wall (in)
- 0.400
- Nominal weight (lb/ft)
- 45.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 44.26
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C3397-4800
- Type
- Casing
- O.D. (mm)
- 339.72
- O.D. (in)
- 13.375
- Wall (mm)
- 8.38
- Wall (in)
- 0.330
- Nominal weight (lb/ft)
- 48.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 46.02
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C3397-5450
- Type
- Casing
- O.D. (mm)
- 339.72
- O.D. (in)
- 13.375
- Wall (mm)
- 9.65
- Wall (in)
- 0.380
- Nominal weight (lb/ft)
- 54.50
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 52.79
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C3397-6100
- Type
- Casing
- O.D. (mm)
- 339.72
- O.D. (in)
- 13.375
- Wall (mm)
- 10.92
- Wall (in)
- 0.430
- Nominal weight (lb/ft)
- 61.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 59.50
- Grades
- —
- Indus part no.IH-TF-LP-OCT-C3397-6800
- Type
- Casing
- O.D. (mm)
- 339.72
- O.D. (in)
- 13.375
- Wall (mm)
- 12.19
- Wall (in)
- 0.480
- Nominal weight (lb/ft)
- 68.00
- Upset weight (lb/ft)
- —
- Plain-end weight (lb/ft)
- 66.17
- Grades
- —
Type — Product or standard type of this row, where one listing covers several. O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. Wall (mm) — Wall thickness in millimetres: minimum or average wall per the governing standard and the order. Wall (in) — The same wall thickness in inches. Nominal weight (lb/ft) — Nominal weight per foot with threads and couplings (non-upset), as the standard lists it. Upset weight (lb/ft) — Nominal weight per foot with external-upset ends. Plain-end weight (lb/ft) — Weight per foot of plain-end pipe. Grades — Steel grades this size is listed in, as the standard publishes them.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What is API 5CT casing and tubing and where is it used in a well?▾
How do I read the Indus part number on API 5CT casing and tubing, such as IH-TF-LP-OCT-T0730-0640?▾
What tubing sizes are available in API 5CT, and what wall thicknesses do they have?▾
Which API 5CT casing sizes and weights do you list, from 4-1/2 in to 13-3/8 in?▾
What is the difference between J55, K55 and N80 in API 5CT casing and tubing?▾
What is the difference between N80 Type 1 and N80Q casing and tubing?▾
What thread and end finish options does API 5CT casing and tubing come with?▾
Which standards does API 5CT casing and tubing follow, and what tolerances apply?▾
What tests and certificates can I get with API 5CT casing and tubing?▾
Is API 5CT casing suitable for onshore and offshore wells, and how do I choose between casing and tubing?▾
API 5CT casing and tubing compared with API 5L line pipe: which do I need?▾
Do you keep API 5CT casing and tubing in stock, and how do I request a quotation?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog

