Size range
Planetary Gearboxes

Dinamic Oil RE In-Line Planetary Gearboxes — 1,780 Nm to 198 kNm

Dinamic Oil RA Right-Angle Planetary Gearboxes — 1,780 Nm to 198 kNm

Dinamic Oil GBA Heavy-Duty Right-Angle Planetary Gearboxes — 281 kNm to 2.72 MNm

Dinamic Oil GB Heavy-Duty Planetary Gearboxes — 281 kNm to 3.62 MNm
From the blog
Written about this range
Specification & standards
How to select a planetary gearbox: torque, service factor, thermal power and brakes
Picking a planetary gearbox from a catalogue table is easy; picking the right one means checking four things in order — output torque times service factor, peak torque, thermal power and shaft loads — and then the brake. A worked method using Dinamic Oil’s RE and GB ranges.
4 min read
Maintenance & reliability
Sugar mill gearbox drives: planetary drives for mills, diffusers and cane handling
A sugar factory runs dozens of drives through a crushing season, from the cane carrier to the dryer, and the mill drives carry millions of newton-metres. Where planetary gearboxes fit in a cane mill, how mill drives are sized, and what to check for continuous seasonal duty.
3 min read
Gulf operating conditions
Planetary gearbox oil in hot climates: grade, change intervals and heat in Gulf duty
Most planetary gearboxes and winches are rated for an ambient of +40 °C — a figure the Gulf passes for months every year. Which oil to use, when to change it, how to tell when a gearbox is running too hot, and how to store spares so they are serviceable when needed.
4 min read
