Category
BW Series Crimp Hose Fittings
BW Series crimp hose fittings for hydraulic hose assemblies.
Stay in one series
Crimp fittings are made for a particular hose and crimp specification. Do not mix series or makers in one assembly; send us the hose and we will confirm the fitting.
Flange and thread ends
Flange heads follow SAE J518 Code 61 and Code 62; Caterpillar flange heads fit Caterpillar's own flange pattern.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
BW Series Crimp Hose Fittings across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- West & Central Africa
- Nigeria, Gabon, Republic of the Congo
- Southern Africa
- South Africa, Zimbabwe, Namibia
BW Series Crimp Hose Fitting × NPTF Male Swivel 90°
BW Series Crimp Hose Fitting × ORB Male Swivel, 90° Block
BW Series Crimp Hose Fitting × NPSM Female Swivel
BW Series Crimp Hose Fitting, Caterpillar Flange, 90° Bend
BW Series Crimp Hose Fitting, Caterpillar Flange, 45° Bend
BW Series Crimp Hose Fitting, Caterpillar Flange
BW Series Crimp Hose Fitting, SAE Code 62 Flange, 30° Bend
BW Series Crimp Hose Fitting, SAE Code 62 Flange, 22° Bend
BW Series Crimp Hose Fitting, SAE Code 61 Flange, 30° Bend
BW Series Crimp Hose Fitting, SAE Code 61 Flange, 22° Bend
Questions we get asked
About this range
- 01What pressure are they rated to?
- The manufacturer publishes no pressure rating for these hose ends. An assembly is rated to the lower of the hose and the end; tell us the hose and working pressure and we will confirm it.