Carbon Steel U-Bend Tubes

U-tubes bent from ASTM A179, A214 and A556 carbon steel tube, for removable-bundle shell-and-tube exchangers and feedwater heaters, to your bend schedule. Made to ASTM A179, ASTM A214, ASTM A556. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Carbon Steel U-Bend Tubes
- Construction: Bent from straight seamless or welded tube
- Standards: ASTM A179, ASTM A214, ASTM A556, ASTM A450, ASME SA178, ASME SA192, ASME SA210
- Base tube material: A179; A192; A210; A214; A556
- Outside diameter: 15.88–50.8 mm
- Wall thickness: 1.24–3.4 mm
- Product type
- Carbon Steel U-Bend Tubes
- Construction
- Bent from straight seamless or welded tube
- Base tube material
- A179; A192; A210; A214; A556
Product description
U-tubes bent from ASTM A179, A214 and A556 carbon steel tube, for removable-bundle shell-and-tube exchangers and feedwater heaters, to your bend schedule.
Specification
- Minimum bend radius: 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD
- Wall thinning at the bend: Per the governing specification on the order (ASTM A688 / TEMA, or A556 / B395) — no single percentage
- Bend heat treatment: To order: stress-relief or solution anneal of the bend plus ~150 mm of leg (A688), or ≥300 mm where the project specification requires
- Leg length: Up to ~12 m typical; straight tube up to 30 m on request
- Base tube: U-bends are bent from straight A179/A192/A210/A214/A556 tube; tube OD and wall availability as for carbon steel heat-exchanger tube
- Common HX tube ODs: 15.88–50.80 mm (5/8–2 in) at 18–10 BWG
- OD tolerance, cold-finished seamless and welded tube (mm): <25.4: ±0.10; 25.4–38.1: ±0.15; >38.1–<50.8: ±0.20; 50.8–<63.5: ±0.25; 63.5–<76.2: ±0.30; 76.2–101.6: ±0.38
- Wall tolerance, cold-finished minimum-wall tube: 0/+20% for OD ≤38.1 mm; 0/+22% for OD >38.1 mm
Standards
ASTM A179, ASTM A214, ASTM A556, ASTM A450, ASME SA178, ASME SA192, ASME SA210. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: A179; A192; A210; A214; A556
Testing and documents
- Straight-tube tests per base specification; U-bend tests (bend-region thinning, ovality, stress relief, hydrotest after bending) agreed on the order
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- U-tube shell-and-tube exchangers and feedwater heaters in refineries, gas and power plants
Sizes
40 sizes, each under its own Indus part number in the size table. These are the common sizes; others are made on request.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the bend schedule: centreline radius and leg length for each row, and any heat treatment of the bends. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Carbon Steel U-Bend Tubes |
| Construction | Bent from straight seamless or welded tube |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM A179, ASTM A214, ASTM A556, ASTM A450, ASME SA178, ASME SA192, ASME SA210 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | A179; A192; A210; A214; A556 |
Dimensions
| Parameter | Value |
|---|---|
| Outside diameter | 15.88–50.8 mm |
| Wall thickness | 1.24–3.4 mm |
| Length | Random or fixed lengths; cut to length on request |
| Bend radius | 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD |
| Size table | Common sizes |
Quality
| Parameter | Value |
|---|---|
| Testing | Straight-tube tests per base specification; U-bend tests (bend-region thinning, ovality, stress relief, hydrotest after bending) agreed on the order |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | U-tube shell-and-tube exchangers and feedwater heaters in refineries, gas and power plants |
Shipping & lead time
Sizes & part numbers
40 sizes- Indus part no.IH-TF-UC-CS-0159-124
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UC-CS-0159-165
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UC-CS-0159-211
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
- Indus part no.IH-TF-UC-CS-0159-241
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 13
- Min. wall (mm)
- 2.41
- Min. wall (in)
- 0.095
- Indus part no.IH-TF-UC-CS-0159-277
- O.D. (mm)
- 15.88
- O.D. (in)
- 5/8
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
- Indus part no.IH-TF-UC-CS-0190-124
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UC-CS-0190-165
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UC-CS-0190-211
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
Show all 40 sizesShow fewer sizes
- Indus part no.IH-TF-UC-CS-0190-241
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 13
- Min. wall (mm)
- 2.41
- Min. wall (in)
- 0.095
- Indus part no.IH-TF-UC-CS-0190-277
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
- Indus part no.IH-TF-UC-CS-0190-305
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 11
- Min. wall (mm)
- 3.05
- Min. wall (in)
- 0.120
- Indus part no.IH-TF-UC-CS-0190-340
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- BWG
- 10
- Min. wall (mm)
- 3.40
- Min. wall (in)
- 0.134
- Indus part no.IH-TF-UC-CS-0254-124
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UC-CS-0254-165
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UC-CS-0254-211
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
- Indus part no.IH-TF-UC-CS-0254-241
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 13
- Min. wall (mm)
- 2.41
- Min. wall (in)
- 0.095
- Indus part no.IH-TF-UC-CS-0254-277
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
- Indus part no.IH-TF-UC-CS-0254-305
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 11
- Min. wall (mm)
- 3.05
- Min. wall (in)
- 0.120
- Indus part no.IH-TF-UC-CS-0254-340
- O.D. (mm)
- 25.40
- O.D. (in)
- 1
- BWG
- 10
- Min. wall (mm)
- 3.40
- Min. wall (in)
- 0.134
- Indus part no.IH-TF-UC-CS-0318-124
- O.D. (mm)
- 31.75
- O.D. (in)
- 1-1/4
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UC-CS-0318-165
- O.D. (mm)
- 31.75
- O.D. (in)
- 1-1/4
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UC-CS-0318-211
- O.D. (mm)
- 31.75
- O.D. (in)
- 1-1/4
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
- Indus part no.IH-TF-UC-CS-0318-241
- O.D. (mm)
- 31.75
- O.D. (in)
- 1-1/4
- BWG
- 13
- Min. wall (mm)
- 2.41
- Min. wall (in)
- 0.095
- Indus part no.IH-TF-UC-CS-0318-277
- O.D. (mm)
- 31.75
- O.D. (in)
- 1-1/4
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
- Indus part no.IH-TF-UC-CS-0318-305
- O.D. (mm)
- 31.75
- O.D. (in)
- 1-1/4
- BWG
- 11
- Min. wall (mm)
- 3.05
- Min. wall (in)
- 0.120
- Indus part no.IH-TF-UC-CS-0318-340
- O.D. (mm)
- 31.75
- O.D. (in)
- 1-1/4
- BWG
- 10
- Min. wall (mm)
- 3.40
- Min. wall (in)
- 0.134
- Indus part no.IH-TF-UC-CS-0381-124
- O.D. (mm)
- 38.10
- O.D. (in)
- 1-1/2
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UC-CS-0381-165
- O.D. (mm)
- 38.10
- O.D. (in)
- 1-1/2
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UC-CS-0381-211
- O.D. (mm)
- 38.10
- O.D. (in)
- 1-1/2
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
- Indus part no.IH-TF-UC-CS-0381-241
- O.D. (mm)
- 38.10
- O.D. (in)
- 1-1/2
- BWG
- 13
- Min. wall (mm)
- 2.41
- Min. wall (in)
- 0.095
- Indus part no.IH-TF-UC-CS-0381-277
- O.D. (mm)
- 38.10
- O.D. (in)
- 1-1/2
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
- Indus part no.IH-TF-UC-CS-0381-305
- O.D. (mm)
- 38.10
- O.D. (in)
- 1-1/2
- BWG
- 11
- Min. wall (mm)
- 3.05
- Min. wall (in)
- 0.120
- Indus part no.IH-TF-UC-CS-0381-340
- O.D. (mm)
- 38.10
- O.D. (in)
- 1-1/2
- BWG
- 10
- Min. wall (mm)
- 3.40
- Min. wall (in)
- 0.134
- Indus part no.IH-TF-UC-CS-0508-124
- O.D. (mm)
- 50.80
- O.D. (in)
- 2
- BWG
- 18
- Min. wall (mm)
- 1.24
- Min. wall (in)
- 0.049
- Indus part no.IH-TF-UC-CS-0508-165
- O.D. (mm)
- 50.80
- O.D. (in)
- 2
- BWG
- 16
- Min. wall (mm)
- 1.65
- Min. wall (in)
- 0.065
- Indus part no.IH-TF-UC-CS-0508-211
- O.D. (mm)
- 50.80
- O.D. (in)
- 2
- BWG
- 14
- Min. wall (mm)
- 2.11
- Min. wall (in)
- 0.083
- Indus part no.IH-TF-UC-CS-0508-241
- O.D. (mm)
- 50.80
- O.D. (in)
- 2
- BWG
- 13
- Min. wall (mm)
- 2.41
- Min. wall (in)
- 0.095
- Indus part no.IH-TF-UC-CS-0508-277
- O.D. (mm)
- 50.80
- O.D. (in)
- 2
- BWG
- 12
- Min. wall (mm)
- 2.77
- Min. wall (in)
- 0.109
- Indus part no.IH-TF-UC-CS-0508-305
- O.D. (mm)
- 50.80
- O.D. (in)
- 2
- BWG
- 11
- Min. wall (mm)
- 3.05
- Min. wall (in)
- 0.120
- Indus part no.IH-TF-UC-CS-0508-340
- O.D. (mm)
- 50.80
- O.D. (in)
- 2
- BWG
- 10
- Min. wall (mm)
- 3.40
- Min. wall (in)
- 0.134
O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. BWG — Birmingham Wire Gauge of the wall, the usual way heat-exchanger tube wall is ordered. Min. wall (mm) — Minimum wall thickness in millimetres. Min. wall (in) — The same minimum wall in inches.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What are Carbon Steel U-Bend Tubes used for?▾
How do I read an Indus part number for Carbon Steel U-Bend Tubes, such as IH-TF-UC-CS-0159-124?▾
What sizes do Carbon Steel U-Bend Tubes come in?▾
What do I need to send to order Carbon Steel U-Bend Tubes to the right size and grade?▾
How tight can the bends be on Carbon Steel U-Bend Tubes?▾
What tests and certificates come with Carbon Steel U-Bend Tubes?▾
Which materials and grades are Carbon Steel U-Bend Tubes available in?▾
Which standards apply to Carbon Steel U-Bend Tubes?▾
What do Carbon Steel U-Bend Tubes connect to or fit with?▾
How should Carbon Steel U-Bend Tubes be inspected on receipt and stored?▾
How are Carbon Steel U-Bend Tubes shipped, and can they be exported from Dubai?▾
Do you keep Carbon Steel U-Bend Tubes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this part
Heat-transfer tubes
U-bend tubes: bend radius, wall thinning and heat treatment
U-tubes are ordered as a bend schedule, not a size. What the minimum bend radius is, how wall thinning and ovality are controlled, when bends are heat treated and tested, and what to put on the order — for carbon, alloy, stainless, nickel-alloy and copper-alloy U-tubes.
4 min read
Heat-transfer tubes
A179 vs A192 vs A210 vs A213: choosing boiler and exchanger tube
Four ASTM standards cover most carbon and alloy steel tube in exchangers, boilers and superheaters. What each is for, how they differ in chemistry and strength, which tests they carry, and how to choose — with the grade tables.
3 min read
Heat-transfer tubes
Finned and seamless heat-transfer tube: a buyer’s guide
How to specify tube for air coolers, shell-and-tube exchangers, condensers, boilers and fired heaters: the standard and grade, OD and wall, length, fin type and bend schedule — and what to send with an enquiry so the quotation matches the data sheet.
6 min read
