Skip to content
IH-TF-HX-STE

Shell and Tube Heat Exchangers

Heat ExchangersEx-stock · delivery in 3 days
Shell and tube heat exchanger tube bundle with tube sheet and baffles, before shell fitting
VIEW 01·Shell and tube heat exchanger tube bundle with tube sheet and baffles, before shell fitting

Shell-and-tube heat exchangers to TEMA classes R, C and B and API 660 / ISO 16812, in fixed-tubesheet, U-tube and floating-head types, built to your process data sheet. Made to TEMA (R/C/B), API 660 9th ed. / ISO 16812, ASME VIII Div 1 / EN 13445. Built to your data sheet or drawing and quoted against it, with the documents and inspection your project needs.

Key features

  • Product type: Shell and Tube Heat Exchangers
  • Construction: Engineered to order, built to your data sheet or drawing
  • Standards: TEMA (R/C/B), API 660 9th ed. / ISO 16812, ASME VIII Div 1 / EN 13445, PED 2014/68/EU
Product type
Shell and Tube Heat Exchangers
Construction
Engineered to order, built to your data sheet or drawing
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Shell-and-tube heat exchangers to TEMA classes R, C and B and API 660 / ISO 16812, in fixed-tubesheet, U-tube and floating-head types, built to your process data sheet.

Shell and Tube Heat Exchangers are engineered equipment, not catalogue items. We quote against your data sheet or drawing, and the design, materials, inspection and documents follow the code and the specification you give us.

How we build and quote

We work from the TEMA data sheet. The thermal design sets the surface, the number of shells and passes and the tube layout; the mechanical design then follows ASME Section VIII Division 1 or EN 13445, with TEMA class R for refinery service, B for chemical and C for general duty, and API 660 / ISO 16812 where the owner specifies it. Tubes, tube sheets, baffles, shells and channels are made to the grades on the data sheet, the tube-to-tubesheet joints are expanded or welded to a qualified procedure, and each unit is hydrotested and documented to the inspection and test plan before it ships from the fabricating shop.

Specification

  • TEMA type code: 3 letters: front head (A, B, C, N, D) / shell (E, F, G, H, J, K, X) / rear head (L, M, N fixed tubesheet; P, S, T, W floating; U = U-tube). Example BEM = bonnet, one-pass shell, fixed bonnet rear
  • TEMA classes: R = refinery (most demanding), B = chemical, C = general commercial; R adds recessed/confined gasket and thicker minimums
  • API 660 edition in force: 9th edition (2015); ISO 16812:2019 supplements it
  • Common configurations: AEU/BEU: cheapest removable bundle, even tube passes only; AES/AET: costliest removable bundle; AEM/BEM/AEL: fixed tubesheet, shell side not cleanable mechanically; NEN: very high pressure

Standards

TEMA (R/C/B), API 660 9th ed. / ISO 16812, ASME VIII Div 1 / EN 13445, PED 2014/68/EU. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Testing and documents

  • Documentation, inspection and test plan to the order's code and specification

Where it is used

  • Gas processing (amine, glycol, NGL trains)
  • LNG pre-cooling and utilities
  • Power and desalination (feedwater heaters, seawater coolers)
  • Refinery turnaround (T&I) retubing and bundle replacement

What to send for a quotation

  • Service, plant location and item number
  • Fluids on the shell side and the tube side, flows in and out, and phase
  • Inlet and outlet temperatures and inlet pressure on each side
  • Physical properties of both fluids, or the simulation file
  • Allowable pressure drop and fouling resistance on each side
  • Design pressure, design temperature and MDMT on each side; test pressure
  • TEMA type and class, or the configuration you need
  • Tube material, OD, wall, length and pitch; shell and channel materials
  • Corrosion allowance, inspection and test plan, and the code and stamp required

Identification

ParameterValue
Product typeShell and Tube Heat Exchangers
ConstructionEngineered to order, built to your data sheet or drawing

Compliance

ParameterValue
StandardsTEMA (R/C/B), API 660 9th ed. / ISO 16812, ASME VIII Div 1 / EN 13445, PED 2014/68/EU

Quality

ParameterValue
CertificationCode documentation and inspection to the order

Dimensions

ParameterValue
Size tableEngineered to order: quoted from your data sheet or drawing

Application

ParameterValue
Typical servicesGas processing (amine, glycol, NGL trains); LNG pre-cooling and utilities; Power and desalination (feedwater heaters, seawater coolers)

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this range

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at