Category
NBR Lay Flat Hoses
Nitrile rubber lay flat hose for dewatering, pump discharge and fire water where oil, fuel residue or abrasion would shorten the life of PVC layflat. Our standard ribbed-cover discharge hose is rated 10 bar in every size from 1-1/2" to 12".
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
NBR Lay Flat Hoses across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Lay flat hose is the easiest large-bore line to move: empty, it rolls flat, so several hundred metres travel on one reel and a container holds a whole dewatering or transfer system. It ships from Dubai as bulk coils up to 400 m or as made-up assemblies with the couplings fitted and tested, with the size table and pressure rating for each bore. Send the flow, the line length and the lift, and we will size the bore before quoting.
Beyond the Gulf
- Western & Northern Europe
- the United Kingdom, Ireland, Belgium
- North Africa
- Egypt, Tunisia, Mauritania
From the blog
Written about this range
Industrial hose
Mine dewatering hose: TPU vs NBR lay flat, head, pressure and acid water
Mines pump water every hour they operate — Upper Silesia’s coal basin alone moves around half a million cubic metres a day. In open pits and temporary underground lines, lay flat hose carries much of it. How to choose between TPU and nitrile, how pit depth turns into hose pressure, what acid mine water means for the hose, and how to lay lines that survive blasting, haul roads and sharp rock.
5 min read
Industrial hose
Why lay flat hose fails: bursts, kinks, abrasion and how to prevent them
Lay flat hose rarely fails because it was too weak on paper. It fails at a kink, along a worn fold, at a coupling that crept, after a pressure surge, or because it was used on a pump suction. Here are the eight common failure modes, how to read the evidence on a failed hose, and the handling and inspection habits that prevent them.
6 min read
Industrial hose
Construction dewatering hose in the GCC: wellpoints, deep wells and the discharge line
Across much of the Gulf coast the water table sits a metre or two below the surface, and in Doha, Jeddah and Kuwait City it has been rising. Almost every basement, tunnel and utility trench has to be dewatered. How the hose system is put together — wellpoint connections, suction, header and lay flat discharge to a settlement tank — and how to size and specify each part.
5 min read