Category
Seals & Accessories
Hydraulic power unit accessories — HYDAC 10-micron suction strainers and return-line filters, SB330 bladder accumulators in 4 and 10 litre at 330 bar, Bosch Rexroth KHB screw-in ball valves, and assembled 11 kW power packs.
Delivery
Seals & Accessories across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Seals, filters and the small hardware around a hydraulic system are light enough that freight rarely decides the order — what decides it is having the right sizes on the shelf when something is opened up. Buyers on longer lanes tend to order these as a kit against a machine rather than singly, which is also how we prefer to quote them. Bring the dimensions or the failed part and we will match it.
Beyond the Gulf
- West & Central Africa
- Nigeria, Ivory Coast, Senegal
- Southern Africa
- South Africa, Zambia, Zimbabwe
- South-East Asia
- Singapore, Vietnam, Philippines
From the blog
Written about this range
Thread & fitting identification
BSPP bonded seals and dowty washers: getting the size right
A bonded seal is sized by the thread it sits under, not by the bore of the fitting or the size printed on the box. That one sentence resolves most of the confusion.
5 min read
Failure analysis
Cross-threaded or stripped port: repair it, insert it, or replace the block
What is recoverable depends on something most people never think about: whether that port seals on the thread or somewhere else. Get that question right and the decision makes itself.
5 min read
Maintenance & reliability
Contamination during a field hose change: what gets in while the line is open
The pump that fails three weeks after a hose change did not fail by coincidence. Everything that ruins it entered during the twenty minutes the port was open.
4 min read