Category
R5 Textile-Cover Hose Ends
Hose ends for SAE 100R5 textile-cover hydraulic hose.
R5 sizes
R5 hose sizes are SAE dash sizes but its inside diameters differ from braided hose (-8 is 13/32"). Each listing gives the inside diameter.
SAE 100R5
SAE J517 100R5 covers single-wire-braid hose with a textile cover. JIC ends follow SAE J514; inverted flare ends SAE J512.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
R5 Textile-Cover Hose Ends across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- West & Central Africa
- Nigeria, Liberia, Sierra Leone
- Southern Africa
- South Africa, Zimbabwe, Namibia
R5 Textile-Cover Hose End × NPTF Male
R5 Textile-Cover Hose End × Inverted Flare Male Swivel 90°
R5 Textile-Cover Hose End × Inverted Flare Male Swivel 45°
R5 Textile-Cover Hose End × Inverted Flare Male Swivel
R5 Textile-Cover Hose End × JIC 37° Female Swivel 90°
R5 Textile-Cover Hose End × JIC 37° Female Swivel 45°
R5 Textile-Cover Hose End × JIC 37° Female Swivel
Questions we get asked
About this range
- 01What pressure are they rated to?
- The manufacturer publishes no pressure rating for these hose ends. An assembly is rated to the lower of the hose and the end; tell us the hose and working pressure and we will confirm it.