Category
Stainless Steel Hose Barbs & Push-On Fittings
Stainless hose barbs and push-on hose fittings in 316 stainless steel.
Barb or push-on
A barb takes hose secured with a clamp; a push-on fitting takes hose made to be pushed on. Match the fitting to the hose type and inside diameter.
Thread ends
JIC ends follow SAE J514, NPT ends ASME B1.20.1 and BSPP ends ISO 228-1.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Stainless Steel Hose Barbs & Push-On Fittings across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- North Africa
- Egypt, Mauritania, Morocco
- East Africa
- Kenya, Mozambique, Tanzania
Stainless Steel Push-On Hose Fitting × NPT Male Swivel
Stainless Steel Push-On Hose Fitting × NPT Male
Stainless Steel Push-On Hose Fitting × JIC 37° Male
Stainless Steel Push-On Hose Fitting × BSPP Male
Stainless Steel Push-On Hose Fitting × NPT Female Swivel
Stainless Steel Push-On Hose Fitting × JIC 37° Female Swivel 90°
Stainless Steel Push-On Hose Fitting × JIC 37° Female Swivel
Stainless Steel Push-On Hose Fitting × BSPP Female Swivel
Stainless Steel Hose Barb × NPT Male 90° Elbow
Category image · Hoses & FittingsStainless Steel Hose Barb × JIC 37° Male
Stainless Steel Hose Barb × JIC 37° Female Swivel
Questions we get asked
About this range
- 01What pressure are they rated to?
- The manufacturer publishes no pressure rating for these hose ends. An assembly is rated to the lower of the hose and the end; tell us the hose and working pressure and we will confirm it.