Heat Pipe Heat Exchangers

Banks of sealed, finned heat pipes that move heat from a hot gas stream to a cold one with no cross-leakage between them, for flue-gas and exhaust heat recovery and HVAC energy recovery. Built to your data sheet or drawing and quoted against it, with the documents and inspection your project needs.
Key features
- Product type: Heat Pipe Heat Exchangers
- Construction: Engineered to order, built to your data sheet or drawing
- Product type
- Heat Pipe Heat Exchangers
- Construction
- Engineered to order, built to your data sheet or drawing
Product description
Banks of sealed, finned heat pipes that move heat from a hot gas stream to a cold one with no cross-leakage between them, for flue-gas and exhaust heat recovery and HVAC energy recovery.
Heat pipe exchangers suit duties where the two gas streams must never mix, such as combustion-air preheating from flue gas, dryer and kiln exhaust recovery, and fresh-air preheat or precool in HVAC. Because each pipe works on its own, a failed pipe does not stop the unit, and the bank can be built with the hot-side fin spacing opened up for dirty gas.
Heat Pipe Heat Exchangers are engineered equipment, not catalogue items. We quote against your data sheet or drawing, and the design, materials, inspection and documents follow the code and the specification you give us.
How we build and quote
Each heat pipe is a sealed, finned tube with a small charge of working fluid that boils at the hot end and condenses at the cold end, so heat moves along the pipe with no pumping and no leakage path between the two gas streams. The working fluid is chosen for the gas temperature, and the fin spacing and material for the fouling and the dew point of the hot stream. We size the unit from the two flows and temperatures, the allowable pressure drop and the duct space, and build it to fit the duct.
Testing and documents
- Documentation, inspection and test plan to the order's code and specification
Where it is used
- Flue-gas / exhaust heat recovery to combustion air
- HVAC energy recovery
What to send for a quotation
- Hot gas flow, inlet temperature and composition, including dew point, dust and SOx
- Cold stream (air or water) flow and temperatures
- Allowable pressure drop on both sides
- Duct dimensions and orientation
- Fin spacing and materials suited to fouling
- Cleaning method
Identification
| Parameter | Value |
|---|---|
| Product type | Heat Pipe Heat Exchangers |
| Construction | Engineered to order, built to your data sheet or drawing |
Quality
| Parameter | Value |
|---|---|
| Certification | Code documentation and inspection to the order |
Dimensions
| Parameter | Value |
|---|---|
| Size table | Engineered to order: quoted from your data sheet or drawing |
Application
| Parameter | Value |
|---|---|
| Typical services | Flue-gas / exhaust heat recovery to combustion air; HVAC energy recovery |
Shipping & lead time
What is a heat pipe heat exchanger?▾
How does a heat pipe heat exchanger work?▾
What sizes are heat pipe heat exchangers made in?▾
How is the working fluid chosen in a heat pipe exchanger?▾
Heat pipe exchanger or shell-and-tube for heat recovery?▾
How do you handle dirty gas in a heat pipe exchanger?▾
What testing comes with a heat pipe heat exchanger?▾
Where are heat pipe heat exchangers used?▾
What sits alongside heat pipe heat exchangers on the shelf?▾
Can you supply heat pipe heat exchangers from Dubai?▾
What data does a heat pipe exchanger quotation need?▾
Is there a standard for heat pipe heat exchangers?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog






