Skip to content

Oil & Gas Hoses

36 SKUs2 brands

Showing 1–36 of 36 SKUs

Hydraulic conduit hose with orange collar in a rig structure

Hydraulic Conduit Hose

Continental1/4" to 1"5000 psi WP
Inquire
Flexible choke and kill line with Tauroflon liner in a rig structure

Flexible Choke & Kill Line (with Tauroflon™ liner, up to 266°F/130°C)

Continental3" to 4"10000 psi WP, 15000 psi MBP (API 16C)
Inquire
Flexible choke and kill line with PA liner installed on a rig

Flexible Choke & Kill Line (with PA liner, up to 212°F/100°C)

Continentalwell-control10000 psi WP, 15000 psi MBP (API 16C)
Inquire
Choke and kill hose assembly installed on a rig, API 16C

Choke & kill and well control hose assemblies (API 16C)

Continental10000 psi WP, 15000 psi MBP (API 16C)well-control
Inquire
BOP control hoses routed in a rig control panel

Blowout Preventer Control Hose Fireshield 5000

ContinentalFireshield: 1300°F (704°C) for 30 minutes per API Spec 16D / API RP 17H1/4" to 1"
Inquire
Armoured flexible hose at a wellsite (well test production hose listing)

Well Test Production Hose

Continental-30°C to +100°C2" to 4"
Inquire
Armoured onshore well stimulation hose at a night wellsite

Onshore Well Stimulation Hose

Continentalwell-service-30°C to +100°C
Inquire
Frac hose assembly connected on a wellsite at night

Frac hose assemblies

Continental15000 psi WP (frac service)3" to 5"
Inquire
Armoured flexible hose at a wellsite (burner/flare boom hose listing)

Burner/Flare Boom Hose

Continentalwell-service2" to 6"
Inquire
Riser tensioner hoses suspended beneath a rig deck

Riser Tensioner Hose

Continentaltensioner-compensator5000 psi WP, 12500 psi MBP
Inquire
Tensioner and compensator hose assemblies hanging under a drilling rig

Hydraulic tensioner & compensator hose assemblies

Continentaltensioner-compensator5000 psi WP, 12500 psi MBP
Inquire
Drill string compensator hose with ContiTech identification label

Drill String Compensator Hose

Continental2" to 4"offshore
Inquire
Category image · Oil & Gas Hoses

QC47 quick connect coupling

Gateslow-pressurePer host hose rating
Inquire
Gates Black Gold 300D drill water discharge hose with green stripe

Water (discharge) Black Gold Drill Water 300D

Gates300 psi WP (discharge service)-40°C to +82°C
Inquire
Gates Black Gold 300D fuel discharge hose with brown stripe

Petroleum transfer (discharge) Black Gold Fuel 300D

Gatespetroleum-discharge-40°C to +82°C
Inquire
Gates Black Gold 400D oilfield service hose with red stripe

Oilfield service Black Gold Oilfield Service 400D

Gates400 psi WP (discharge service)low-pressure
Inquire
Gates Black Gold 300D bulk material discharge hose with yellow stripe

Material handling (discharge) Black Gold Bulk Material 300D

Gates-40°C to +82°C300 psi WP (discharge service)
Inquire
Category image · Oil & Gas Hoses

Low pressure oilfield hose Flameshield

Gatesfire-resistantlow-pressure
Inquire
Category image · Oil & Gas Hoses

Hose Megashield 5000 hose assemblies

Gateslow-pressureFireshield rated
Inquire
Category image · Oil & Gas Hoses
Rotary and vibrator hoses in a derrick, mud-bonded couplings

Rotary & vibrator hose mud bonded

Continentalstandarddrilling
Inquire
Rotary and vibrator hoses hanging from a derrick, cement-bonded couplings

Rotary & vibrator hose cement bonded

Continentaldrilling5000 psi WP, 12500 psi MBP (API 7K)
Inquire
Mud booster hose installed on a drilling rig

Mud Booster Hose

Continental-30°C to +82°Cstandard
Inquire

Questions we get asked

About this range

01What documentation comes with a well-control hose?
The certification its API specification requires, including the hydrostatic test record for the assembly, plus material certificates where the order calls for them. State your operator’s documentation requirements at quotation so they are prepared with the hose rather than after it.
02Can these hoses be used in sour service?
Some can. Suitability depends on the construction, the liner and the fluid, so it is confirmed against your H2S partial pressure, temperature and pressure cycle rather than assumed. The drilling range includes a rotary and vibrator hose built for high-temperature sour service.
03Which brands are on this shelf?
Continental ContiTech and Gates oilfield hose.
04What is the difference between rotary, vibrator and cement hose?
Rotary hose is the flexible link between the standpipe and the swivel or top drive, carrying drilling mud to the string. Vibrator hose connects the mud pump to the standpipe manifold and absorbs the pump's pulsation. Cement hose carries cement slurry on cementing lines. All three are rotary drilling hose under API 7K, built and rated for their pressure and service.
05Bonded or unbonded flexible hose — what is the difference?
In a bonded hose the rubber and steel reinforcement layers are vulcanised into one structure, covered by API 17K. In an unbonded flexible pipe separate polymer and steel layers slide over each other, covered by API 17J. Both are used for choke and kill lines; the specification named on the assembly's certificate tells you which you have.
06Which end connections can oilfield hose assemblies have?
The connection your equipment uses: API 6A flanges, hubs, hammer unions such as Figure 1502 or 602, or threaded ends. The fittings are attached and tested by the hose manufacturer as part of the certified assembly, so specify both ends at quotation.
07What are tensioner and compensator hoses for?
Offshore rigs use them on riser tensioners and drill-string compensators, which keep the riser and drill string under steady tension as the vessel heaves. The hoses carry high-pressure hydraulic fluid through constant flexing, so they are built and rated for cycle life as much as for pressure.
08Do you supply low-pressure oilfield hose?
Yes — hose for mud, water, fuel, bulk-material and general oilfield service, including fire-resistant and flame-protected constructions, alongside the high-pressure drilling and well-control ranges.