Inner-Grooved Copper Tubes

Copper tube with helical grooves rolled inside, which raise the refrigerant-side heat transfer, to EN 12735-2, ASTM B359 and GB/T 20928, for air-conditioning and refrigeration coils. Made to GB/T 20928-2020, EN 12735-2, ASTM B359. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Inner-Grooved Copper Tubes
- Construction: Seamless drawn
- Standards: GB/T 20928-2020, EN 12735-2, ASTM B359, ASTM B111
- Base tube material: Cu-DHP C12200; CuNi10Fe1Mn C70600
- Fin material: internal helical grooves
- Outside diameter: 7–15.87 mm
- Wall thickness: 0.25–0.58 mm
- Product type
- Inner-Grooved Copper Tubes
- Construction
- Seamless drawn
- Base tube material
- Cu-DHP C12200; CuNi10Fe1Mn C70600
- Fin material
- internal helical grooves
Product description
Copper tube with helical grooves rolled inside, which raise the refrigerant-side heat transfer, to EN 12735-2, ASTM B359 and GB/T 20928, for air-conditioning and refrigeration coils.
Specification
- Typical inner-groove geometry, 9.52 mm: 60 grooves, 18° helix, 0.20 mm groove depth
- Typical inner-groove geometry, 12.70 mm: 18° helix, 0.25 mm groove depth, 65–70 grooves
- Standards for inner-grooved tube: EN 12735-2 (LWC, Y040) / ASTM B359 (O50 LWC, H80 straight) / GB/T 20928
- GB/T 20928 current edition: GB/T 20928-2020 (replaces -2007)
- Cu-Ni inner-grooved tube exists: CuNi10Fe1Mn / C70600 to ASTM B359, R290 / O61, for seawater-cooled condensers
Standards
GB/T 20928-2020, EN 12735-2, ASTM B359, ASTM B111. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: Cu-DHP C12200; CuNi10Fe1Mn C70600
- Fins: internal helical grooves
Testing and documents
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Fin-and-tube AC evaporators and condensers (inner-grooved)
- Seawater-cooled refrigerant condensers (Cu-Ni inner-grooved)
Sizes
11 sizes, each under its own Indus part number in the size table. The table lists typical sizes for the range; other sizes are made on request.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Inner-Grooved Copper Tubes |
| Construction | Seamless drawn |
Compliance
| Parameter | Value |
|---|---|
| Standards | GB/T 20928-2020, EN 12735-2, ASTM B359, ASTM B111 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | Cu-DHP C12200; CuNi10Fe1Mn C70600 |
| Fin material | internal helical grooves |
Dimensions
| Parameter | Value |
|---|---|
| Outside diameter | 7–15.87 mm |
| Wall thickness | 0.25–0.58 mm |
| Length | Random or fixed lengths; cut to length on request |
| Size table | Typical sizes — other sizes on request |
Quality
| Parameter | Value |
|---|---|
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Fin-and-tube AC evaporators and condensers (inner-grooved); Seawater-cooled refrigerant condensers (Cu-Ni inner-grooved) |
Shipping & lead time
Sizes & part numbers
11 sizes- Indus part no.IH-TF-EC-ENH-0095-030
- O.D. (mm)
- 9.52
- O.D. (in)
- 3/8
- Wall (mm)
- 0.30
- Groove height (mm)
- 0.20
- Grooves
- 60
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0070-025
- O.D. (mm)
- 7.00
- O.D. (in)
- —
- Wall (mm)
- 0.25
- Groove height (mm)
- 0.18
- Grooves
- 50
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0079-025
- O.D. (mm)
- 7.94
- O.D. (in)
- 5/16
- Wall (mm)
- 0.25
- Groove height (mm)
- 0.20
- Grooves
- 50
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0079-036
- O.D. (mm)
- 7.94
- O.D. (in)
- 5/16
- Wall (mm)
- 0.36
- Groove height (mm)
- 0.20
- Grooves
- 50
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0095-028
- O.D. (mm)
- 9.52
- O.D. (in)
- 3/8
- Wall (mm)
- 0.28
- Groove height (mm)
- 0.20
- Grooves
- 60
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0095-035
- O.D. (mm)
- 9.52
- O.D. (in)
- 3/8
- Wall (mm)
- 0.35
- Groove height (mm)
- 0.20
- Grooves
- 60
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0095-041
- O.D. (mm)
- 9.52
- O.D. (in)
- 3/8
- Wall (mm)
- 0.41
- Groove height (mm)
- 0.20
- Grooves
- 60
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0127-032
- O.D. (mm)
- 12.70
- O.D. (in)
- 1/2
- Wall (mm)
- 0.32
- Groove height (mm)
- 0.25
- Grooves
- 70
- Helix angle (°)
- 18
Show all 11 sizesShow fewer sizes
- Indus part no.IH-TF-EC-ENH-0127-051
- O.D. (mm)
- 12.70
- O.D. (in)
- 1/2
- Wall (mm)
- 0.51
- Groove height (mm)
- 0.25
- Grooves
- 65
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0159-038
- O.D. (mm)
- 15.87
- O.D. (in)
- 5/8
- Wall (mm)
- 0.38
- Groove height (mm)
- 0.30
- Grooves
- 75
- Helix angle (°)
- 18
- Indus part no.IH-TF-EC-ENH-0159-058
- O.D. (mm)
- 15.87
- O.D. (in)
- 5/8
- Wall (mm)
- 0.58
- Groove height (mm)
- 0.30
- Grooves
- 75
- Helix angle (°)
- 18
O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. Wall (mm) — Wall thickness in millimetres: minimum or average wall per the governing standard and the order. Groove height (mm) — Height of the internal grooves, in millimetres. Grooves — Number of internal grooves. Helix angle (°) — Helix angle of the internal grooves, in degrees.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What are Inner-Grooved Copper Tubes used for?▾
How do I read an Indus part number for Inner-Grooved Copper Tubes, such as IH-TF-EC-ENH-0095-030?▾
What sizes do Inner-Grooved Copper Tubes come in?▾
What do I need to send to order Inner-Grooved Copper Tubes to the right size and grade?▾
What tests and certificates come with Inner-Grooved Copper Tubes?▾
Which materials and grades are Inner-Grooved Copper Tubes available in?▾
Which standards apply to Inner-Grooved Copper Tubes?▾
What do Inner-Grooved Copper Tubes connect to or fit with?▾
How should Inner-Grooved Copper Tubes be inspected on receipt and stored?▾
How do Inner-Grooved Copper Tubes differ from Low-Fin Copper-Alloy Tubes?▾
How are Inner-Grooved Copper Tubes shipped, and can they be exported from Dubai?▾
Do you keep Inner-Grooved Copper Tubes in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog
Written about this range
Heat-transfer tubes
Integral low-fin tube for condenser and cooler retubing
Low-fin tube is rolled out of the tube wall itself, adding outside surface to a shell-and-tube bundle without changing the tube sheet. What it is, where it helps, the standards and materials, and how to order it — with the live size table.
4 min read
Heat-transfer tubes
Copper-nickel 90/10 vs 70/30 vs admiralty brass in seawater cooling
Condenser and cooler tube for seawater, brackish and cooling-tower water: how admiralty brass, aluminium brass and 90/10, 70/30 and 66-30-2-2 copper-nickel differ, the water velocities each tolerates, and how to order them to ASTM B111.
3 min read

