Naval Brass and Copper-Alloy Tube Sheets

Tube sheets in naval brass (C46400) and other copper alloys to ASTM B171, for condensers and coolers with copper-alloy tubes. Made to ASTM B171/B171M, ASTM B122/B122M, DIN EN1653. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Naval Brass and Copper-Alloy Tube Sheets
- Construction: Machined from plate or forging to your drawing
- Standards: ASTM B171/B171M, ASTM B122/B122M, DIN EN1653, GB/T 2040, JIS H3100
- Product type
- Naval Brass and Copper-Alloy Tube Sheets
- Construction
- Machined from plate or forging to your drawing
Product description
Tube sheets in naval brass (C46400) and other copper alloys to ASTM B171, for condensers and coolers with copper-alloy tubes.
Specification
- Naval brass C46400 chemistry: Cu 59.0–62.0, Sn 0.5–1.0, Pb ≤0.20, Fe ≤0.10, Zn rem
- Tempers: M20 as hot rolled; O25 hot rolled and annealed (ASME Code: O25 only)
- Max thickness covered: 140 mm (5 in)
- Thickness tolerance, 25–38 mm plate ≤1000 mm wide: ±0.97 mm (Cu-Ni +25%)
Standards
ASTM B171/B171M, ASTM B122/B122M, DIN EN1653, GB/T 2040, JIS H3100. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Testing and documents
- Tension test per E8
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- Tubesheets for seawater condensers and coolers, typically matched to Cu-Ni or Al-brass tubes
Standard geometry
| Alloy (UNS) | Description | Plate thickness (mm) | Tensile min (MPa) | Yield min, 0.5% EUL (MPa) | Elongation min (%) |
|---|---|---|---|---|---|
| C46400 / C46500 | Naval brass | ≤80 | 345 | 140 | 35 |
| C46400 / C46500 | Naval brass | 80–140 | 345 | 125 | 35 |
| C44300 / C44400 / C44500 | Admiralty | ≤100 | 310 | 105 | 35 |
| C70600 / C70620 | 90-10 Cu-Ni | ≤140 | 275 | 105 | 30 |
| C71500 / C71520 | 70-30 Cu-Ni | ≤60 | 345 | 140 | 30 |
| C71500 / C71520 | 70-30 Cu-Ni | 60–140 | 310 | 125 | 30 |
| C61400 | Aluminium bronze D | ≤50 | 485 | 205 | 35 |
| C61400 | Aluminium bronze D | 50–140 | 450 | 195 | 35 |
These are the limits of the standard, not part numbers. Each item is made to your drawing.
How we supply
Tube sheets, baffles and plates are made to the purchaser's drawing, so there is no catalogue part number for each size. We cut, machine, drill, ream and groove them from certified plate or forgings, stack-drill baffles and support plates so the holes line up through the bundle, and check hole size, pitch and ligaments against the drawing before dispatch. Send the drawing, or the material, the outside diameter, the thickness, the tube size and the pitch and layout, and we quote with the mill certificates and the inspection you need.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Naval Brass and Copper-Alloy Tube Sheets |
| Construction | Machined from plate or forging to your drawing |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM B171/B171M, ASTM B122/B122M, DIN EN1653, GB/T 2040, JIS H3100 |
Dimensions
| Parameter | Value |
|---|---|
| Length | Random or fixed lengths; cut to length on request |
| Size table | Made to your drawing; standard geometry in the description |
Quality
| Parameter | Value |
|---|---|
| Testing | Tension test per E8 |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | Tubesheets for seawater condensers and coolers, typically matched to Cu-Ni or Al-brass tubes |
Shipping & lead time
What are naval Brass and Copper-Alloy Tube Sheets used for?▾
How do I order the Naval Brass and Copper-Alloy Tube Sheets when there is no size table?▾
What is the minimum tube pitch for the Naval Brass and Copper-Alloy Tube Sheets?▾
What strength do naval brass tube sheets have?▾
What are the tube hole and expansion details for the Naval Brass and Copper-Alloy Tube Sheets?▾
Which materials are the Naval Brass and Copper-Alloy Tube Sheets made from?▾
Which standards and certificates apply to the Naval Brass and Copper-Alloy Tube Sheets?▾
What goes with the Naval Brass and Copper-Alloy Tube Sheets in an exchanger?▾
What testing applies to the Naval Brass and Copper-Alloy Tube Sheets?▾
How do the Naval Brass and Copper-Alloy Tube Sheets compare with other tube sheet materials?▾
Can you export the Naval Brass and Copper-Alloy Tube Sheets from Dubai?▾
Do you keep the Naval Brass and Copper-Alloy Tube Sheets in stock in Dubai?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog



