Skip to content
IH-TF-HR-HFN

H-Fin and Rectangular Fin Tubes

H-Fin & Rectangular Fin TubesEx-stock · delivery in 3 days
H-fin tube end view, paired square steel fins welded either side of the tube
VIEW 01·H-fin tube end view, paired square steel fins welded either side of the tube

Pairs of steel plates welded across one tube (H-fin) or across two tubes side by side (double H-fin), arranged in line. Made to ASTM A192, ASTM A210. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.

Key features

  • Product type: H-Fin and Rectangular Fin Tubes
  • Construction: Two plates with central arcs welded to one tube (H) or one plate across two tubes (double-H); in-line tubes
  • Standards: ASTM A192, ASTM A210
  • Base tube material: A179, A192, A210; T11/T22; 304/316
  • Fin material: Carbon steel; Alloy; Stainless
  • Outside diameter: 32–51 mm
  • Wall thickness: 4–6 mm
  • Fin geometry: thickness 1.5–3.5 typical
  • Maximum service temperature: Carbon-steel H-fin ≈600 °C; set by fin and tube material
Product type
H-Fin and Rectangular Fin Tubes
Construction
Two plates with central arcs welded to one tube (H) or one plate across two tubes (double-H); in-line tubes
Base tube material
A179, A192, A210; T11/T22; 304/316
Fin material
Carbon steel; Alloy; Stainless
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Pairs of steel plates welded across one tube (H-fin) or across two tubes side by side (double H-fin), arranged in line. The flat plates leave straight gas lanes that resist fouling, so H-fins are used in boiler economisers and waste-heat boilers with dusty flue gas.

Specification

  • Maximum service temperature: Carbon-steel H-fin ≈600 °C; set by fin and tube material
  • Max tube length (m): 20
  • Construction: Two plates with central arcs welded to one tube (H) or one plate across two tubes (double-H); in-line tubes
  • Weld process: Resistance / induction (flash) welded
  • Base tube OD (mm): 25–51 standard, up to 100
  • Fin plate size: Edge ≈ 2 × tube OD
  • Fin thickness (mm): 1.5–3.5 typical

Standards

ASTM A192, ASTM A210. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Materials

  • Tube: A179, A192, A210; T11/T22; 304/316
  • Fins: Carbon steel; Alloy; Stainless

Testing and documents

  • Hydrotest of panel/tube per boiler code
  • Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan

Where it is used

  • Boiler and HRSG economisers on dust-laden or fouling flue gas: oil & gas, waste-to-energy, marine, power

Sizes

2 sizes, each under its own Indus part number in the size table. The table gives the range as limits; any size inside it is made to order.

Ordering

Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the fin type, material, height, thickness and fins per inch, and the bare length at each end. We quote with the mill certificates and the inspection you need.

Identification

ParameterValue
Product typeH-Fin and Rectangular Fin Tubes
ConstructionTwo plates with central arcs welded to one tube (H) or one plate across two tubes (double-H); in-line tubes

Compliance

ParameterValue
StandardsASTM A192, ASTM A210

Construction

ParameterValue
Base tube materialA179, A192, A210; T11/T22; 304/316
Fin materialCarbon steel; Alloy; Stainless

Dimensions

ParameterValue
Outside diameter32–51 mm
Wall thickness4–6 mm
Fin geometrythickness 1.5–3.5 typical
Length20 m maximum single length
Size tableSize range — discrete sizes on request

Performance

ParameterValue
Maximum service temperatureCarbon-steel H-fin ≈600 °C; set by fin and tube material

Quality

ParameterValue
TestingHydrotest of panel/tube per boiler code
CertificationMill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement

Application

ParameterValue
Typical servicesBoiler and HRSG economisers on dust-laden or fouling flue gas: oil & gas, waste-to-energy, marine, power

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part