Skip to content
+971 52 2477942
Indus Hydraulics

Category

Brass Compression Fittings

Flareless compression fittings in brass, for metal and plastic tubing; plastic tube takes an insert.

14 SKUs1 brands

Making up a compression joint

Cut the tube square, slide on the nut and sleeve, and tighten: the nut squeezes the sleeve onto the tube. Plastic tube needs a brass insert in the bore so it is not crushed. Sleeves and nuts are listed separately for remaking joints.

SAE J512

Brass compression fittings are covered by SAE J512, Automotive Tube Fittings. Pipe-thread ends are NPTF to ASME B1.20.3.

Size range

144orderable sizes
14listings with a size table

Every size above is a part number you can quote from. Open any listing for its full table.

Delivery

Brass Compression Fittings across the Gulf

Ex-stock from Dubai, delivered within 3 working days in the UAE.

Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.

Saudi ArabiaTypically 3 working days from dispatchOmanTypically 3 working days from dispatchQatarTypically 3 working days from dispatchBahrainTypically 3 working days from dispatchKuwaitTypically 3 working days from dispatch

Beyond the Gulf

West & Central Africa
Nigeria, Sierra Leone, Cameroon
Southern Africa
South Africa, Namibia, Botswana

See every export destination

Showing 1–14 of 14 SKUs

Sort
LatestA–ZZ–A
Brass tube insert for plastic tubing, side view
IH-BR-73

Brass Tube Insert for Plastic Tubing

Indus Hydraulicscompression tube end, 1/8" to 3/4"tube insert
Category image · Hoses & Fittings
IH-BR-72

Brass Compression × NPTF Male Branch Tee

Indus Hydraulicscompression tube end, 3/16" to 1/2"flareless compression: the nut squeezes a brass sleeve onto the tube, so the tube needs no flare
Brass compression × NPTF male run tee, top view
IH-BR-71

Brass Compression × NPTF Male Run Tee

Indus Hydraulicscompression tube end, 3/16" to 1/2"run tee
Brass compression × NPTF female 90° elbow, top view
IH-BR-70

Brass Compression × NPTF Female 90° Elbow

Indus Hydraulics90° elbowflareless compression: the nut squeezes a brass sleeve onto the tube, so the tube needs no flare
Brass compression × NPTF male 90° elbow, top view
IH-BR-69

Brass Compression × NPTF Male 90° Elbow

Indus Hydraulicsflareless compression: the nut squeezes a brass sleeve onto the tube, so the tube needs no flarecompression tube end, 1/8" to 1"
Brass compression × NPTF male connector, side view
IH-BR-68

Brass Compression × NPTF Male Connector

Indus Hydraulicsflareless compression: the nut squeezes a brass sleeve onto the tube, so the tube needs no flarecompression tube end, 1/8" to 7/8"
Brass compression × NPTF female connector, side view
IH-BR-66

Brass Compression × NPTF Female Connector

Indus Hydraulicscompression tube end, 1/8" to 3/4"flareless compression: the nut squeezes a brass sleeve onto the tube, so the tube needs no flare
Brass compression union 90° elbow, top view
IH-BR-65

Brass Compression Union 90° Elbow

Indus Hydraulics90° union elbowcompression tube end, 1/8" to 3/4"
Brass compression union tee, top view
IH-BR-64

Brass Compression Union Tee

Indus Hydraulicsflareless compression: the nut squeezes a brass sleeve onto the tube, so the tube needs no flarecompression tube end, 1/8" to 3/4"
Brass compression union, side view
IH-BR-62

Brass Compression Union

Indus Hydraulicscompression tube end, 1/8" to 7/8"straight union
Brass compression nut, long, side view
IH-BR-61L

Brass Compression Nut, Long

Indus Hydraulicscompression tube end, 3/16" to 3/4"compression nut
Brass compression nut, side view
IH-BR-61

Brass Compression Nut

Indus Hydraulicscompression tube end, 1/8" to 7/8"compression nut
Brass compression sleeve, side view
IH-BR-60

Brass Compression Sleeve

Indus Hydraulicscompression sleeveflareless compression: the nut squeezes a brass sleeve onto the tube, so the tube needs no flare
Category image · Hoses & Fittings
IH-BR-376

Brass NPTF Female × NPTF Male × Compression Tee

Indus Hydraulicsadapter teeNPTF (Dryseal), 1/8" (1/8-27)

Questions we get asked

About this range

01What are they made from?
Brass. Each listing gives the alloy where the manufacturer states it, such as CA360 free-machining brass (C36000).
02Do the listings show part numbers and sizes?
Yes: every size has its own Indus part number, with the size and thread on each end in the size table.
03What pressure are they rated to?
The manufacturer publishes no pressure rating for this range. Tell us the medium, working pressure and temperature, and we will confirm the fitting before you order.