Skip to content
IH-TF-HF-HFW

High-Frequency Welded Spiral Fin Tubes — Solid and Serrated

HF-Welded Spiral Fin TubesEx-stock · delivery in 3 days
Serrated spiral fin tubes stacked end-on, segmented steel fins round each bare tube end
VIEW 01·Serrated spiral fin tubes stacked end-on, segmented steel fins round each bare tube end
1 / 2

Steel fin strip welded helically to the base tube by high-frequency resistance welding, in a solid fin or a serrated (segmented) fin. Made to API 560, ASTM A106, ASTM A192. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.

Key features

  • Product type: High-Frequency Welded Spiral Fin Tubes
  • Standards: API 560, ASTM A106, ASTM A192, ASTM A210, ASTM A213, ASTM A335
  • Base tube material: CS A106 B, A192, A210; Cr-Mo A213 T5/T9/T11/T22, A335 P5/P9/P11/P22; Stainless A312/A213 TP304H/321/347
  • Fin material: Carbon steel; 11–13Cr (Type 405/410S); 18Cr-8Ni; 25Cr-20Ni
  • Outside diameter: 50.8 mm
  • Wall thickness: 1.98–16.0 (0.078–0.630 in)
  • Maximum service temperature: Set by fin material; fired-heater fin-tip limits per API 560: carbon steel 454 °C, 2¼Cr / 5Cr 549 °C, 25Cr-20Ni 982 °C
Product type
High-Frequency Welded Spiral Fin Tubes
Base tube material
CS A106 B, A192, A210; Cr-Mo A213 T5/T9/T11/T22, A335 P5/P9/P11/P22; Stainless A312/A213 TP304H/321/347
Fin material
Carbon steel; 11–13Cr (Type 405/410S); 18Cr-8Ni; 25Cr-20Ni
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Steel fin strip welded helically to the base tube by high-frequency resistance welding, in a solid fin or a serrated (segmented) fin. The weld makes the fin part of the tube, so these fins carry the high gas temperatures of HRSGs, economisers and fired-heater convection sections, where the fin material, not the bond, sets the limit.

Specification

  • Maximum service temperature: Set by fin material; fired-heater fin-tip limits per API 560: carbon steel 454 °C, 2¼Cr / 5Cr 549 °C, 25Cr-20Ni 982 °C
  • Base tube OD (mm): 25.4–219.1 (1–8 5/8 in)
  • Base tube wall (mm): 1.98–16.0 (0.078–0.630 in)
  • Fin material: Carbon steel, low-alloy (Cr-Mo, 11–13Cr), stainless
  • Max length (m): 18.3 (60 ft)
  • Fin height, solid (mm): 9.5–31.75 (3/8–1 1/4 in)
  • Fin thickness, solid (mm): 0.89–3.05 (0.035–0.120 in)
  • Fin density, solid: 1–6 FPI (39–236 fins/m)
  • Fin height, serrated (mm): 12.7–31.75 (1/2–1 1/4 in)
  • Fin thickness, serrated (mm): 0.89–1.65 (0.035–0.065 in)
  • Fin density, serrated: 1–6 FPI (39–236 fins/m)
  • Segment width (mm): 4.0 or 7.9 (5/32 or 5/16 in)
  • Unserrated base (mm): ≈5–6.35
  • HRSG economiser base OD: 50.8 mm (2 in) is the usual standard

Standards

API 560, ASTM A106, ASTM A192, ASTM A210, ASTM A213, ASTM A335. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Materials

  • Tube: CS A106 B, A192, A210; Cr-Mo A213 T5/T9/T11/T22, A335 P5/P9/P11/P22; Stainless A312/A213 TP304H/321/347
  • Fins: Carbon steel; 11–13Cr (Type 405/410S); 18Cr-8Ni; 25Cr-20Ni

Testing and documents

  • Base tube hydrotest per its spec
  • Weld-bond / fin pull and visual checks per maker; no public standard value found
  • Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan

Where it is used

  • Fired-heater convection sections in refineries
  • Gas-fired heater convection banks
  • HRSG economisers and evaporators in GCC combined-cycle and IWPP plants
  • HRSG superheaters, evaporators and economisers in combined-cycle power and water plants

Sizes

3 sizes, each under its own Indus part number in the size table. The table gives the range as limits; any size inside it is made to order.

Ordering

Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the fin type, material, height, thickness and fins per inch, and the bare length at each end. We quote with the mill certificates and the inspection you need.

Identification

ParameterValue
Product typeHigh-Frequency Welded Spiral Fin Tubes

Compliance

ParameterValue
StandardsAPI 560, ASTM A106, ASTM A192, ASTM A210, ASTM A213, ASTM A335

Construction

ParameterValue
Base tube materialCS A106 B, A192, A210; Cr-Mo A213 T5/T9/T11/T22, A335 P5/P9/P11/P22; Stainless A312/A213 TP304H/321/347
Fin materialCarbon steel; 11–13Cr (Type 405/410S); 18Cr-8Ni; 25Cr-20Ni

Dimensions

ParameterValue
Outside diameter50.8 mm
Wall thickness1.98–16.0 (0.078–0.630 in)
Length18.3 m maximum single length
Size tableSize range — discrete sizes on request

Performance

ParameterValue
Maximum service temperatureSet by fin material; fired-heater fin-tip limits per API 560: carbon steel 454 °C, 2¼Cr / 5Cr 549 °C, 25Cr-20Ni 982 °C

Quality

ParameterValue
TestingBase tube hydrotest per its spec; Weld-bond / fin pull and visual checks per maker; no public standard value found
CertificationMill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement

Application

ParameterValue
Typical servicesFired-heater convection sections in refineries; Gas-fired heater convection banks; HRSG economisers and evaporators in GCC combined-cycle and IWPP plants

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part

RELATED · OFTEN PAIRED WITH

Engineers viewing this also looked at