BRANDS / UNITED STATES · OTECO
Oteco
Oteco Inc. of Houston, Texas, makes drilling and wellsite equipment: Model 72 and DM gate valves, PRV shear-pin and RRV reset relief valves, Model 6, 7 and 8 drilling pressure gauges, drill pipe float valves, long-sweep manifold fittings and the OTECO connector, BOP and stripper rubber, pipe wipers and mud guards, mud pump pistons, valves and dampener diaphragms, and swivel washpipe and packing. Indus Hydraulics is an authorised Oteco distributor for the Middle East and holds Oteco stock in Dubai, UAE.
UNITED STATES★ TIER-1 PARTNER85 SKUS

SKUs in stock
85 / 85
Partner since
2026
Oteco product families
Gate Valves
8 SKUs
Float Valves
5 SKUs
BOP Spare Parts & Elastomers
5 SKUs
Pressure Relief Valves
9 SKUs
Fittings
1 SKU
HP Pressure Gauges
9 SKUs
Gate Valve Repair Kits & Parts
5 SKUs
Rig Floor Consumables
12 SKUs
Rig Hardware
6 SKUs
Mud Manifold Fittings
10 SKUs
Swivel Washpipe & Packing
9 SKUs
Mud Pump Fluid-End Parts
6 SKUs
Top SKUs · Oteco
View all 85 →
IH-OTC-MF-GSNKTO
Oteco 160° Standpipe Goosenecks with Top Outlet, 3 in, 4 in, 5 in
Get quote →

IH-OTC-MF-GSNK160
Oteco 160° Standpipe Goosenecks, 3 in, 4 in, 5 in
Get quote →

IH-OTC-MF-GSNK180
Oteco 180° Standpipe Goosenecks, 4 in, 5 in
Get quote →

IH-OTC-MF-LSE45
Oteco 45° Long-Sweep Ells, 2 in, 3 in, 4 in, 5 in
Get quote →

IH-OTC-MF-LSE90-OUTLET
Oteco 90° Long-Sweep Ells with 2" Outlet, 4 in, 5 in
Get quote →

IH-OTC-MF-LSE90
Oteco 90° Long-Sweep Ells, 2 in, 3 in, 4 in, 5 in, 6 in
Get quote →

IH-OTC-CONNECTOR
OTECO Connector — Hub and Clamp Connector, 1" to 12"
Get quote →

IH-OTC-DM-KITS
Oteco DM Gate Valve Repair Kits
Get quote →
Oteco FAQ
Buying Oteco from Indus Hydraulics
- 01Is Indus Hydraulics an authorised Oteco distributor?
- Yes. Indus Hydraulics is an authorised Oteco distributor for the Middle East. We hold Oteco stock at our warehouse in Dubai, UAE, supply complete valves and gauges as well as repair kits, spares and rubber goods, and ship across the GCC and worldwide.
- 02What does Oteco make?
- Oteco Inc. makes drilling and wellsite equipment in Houston, Texas: Model 72 and DM gate valves with their kits and spares, PRV shear-pin and RRV reset relief valves, Model 6, 7 and 8 drilling pressure gauges, drill pipe float valves, long-sweep manifold fittings and goosenecks, the OTECO connector, annular BOP and stripper rubber, pipe and kelly wipers, mud and oil guards, wireline guides, mud pump pistons, valves, seats and dampener diaphragms, and swivel washpipe and packing.
- 03Which Oteco parts interchange with other makes?
- Only those Oteco itself publishes. Model 72 gate valve parts interchange with Cameron Type S Flex-Seal valve parts; PRV relief valve parts with Cameron-style shear relief valves; the RRV bonnet assembly with Cameron Type A and B reset relief valves; the Model 6 and Model 7 gauges with the Cameron, Totco, Geosource, Wadeco and Gauges International models Oteco lists; and the OTECO connector with Grayloc clamp connectors. Hammer-union ends are made to mate with FMC Weco unions (Oteco bulletin EB-004). Oteco publishes no interchange for the DM gate valve, so we match DM parts by Oteco part number.
- 04How are Oteco part numbers shown on this site?
- Every Oteco listing carries the Oteco part number with our prefix: IH-OTC- followed by the Oteco number, for example IH-OTC-110000. The size table on each listing gives every part number with its model, size, pressure and service, so you can order from the number on your nameplate or bill of materials.
- 05Do Oteco valves and gauges come in sour gas service?
- Yes. Oteco offers sour gas (H2S) trims on the Model 72 and DM gate valves, the PRV and RRV relief valves, the drilling pressure gauges and the float valves, and sour gas service on its manifold fittings. Each listing shows the trim of every part number in its size table, alongside standard, stainless and, where offered, cold-service trims.
- 06What certification do Oteco products carry?
- Oteco Inc. holds ISO 9001 certification. Oteco states DNV type approval for the listed PRV relief valve models, ABS and DNV approval for selected RRV models, and ABS or DNV certification of gauge units on request. Oteco literature makes no API monogram or NACE claim for these products, so neither do we. Tell us what documentation your project needs and we confirm it with Oteco before you order.
- 07Where are Oteco products made?
- Oteco makes its equipment in Houston, Texas, and the country of origin is the United States. We ship from stock in Dubai, or bring parts in from Oteco in Houston where a part number is not on the shelf.
- 08What should I send to order Oteco parts?
- The Oteco part number is the quickest route. Otherwise send the equipment and model (for example a Model 72 gate valve, a Model 6 gauge or the pump and liner size), the size, the working pressure and the service, and a nameplate photo if you have one. We confirm the part and the delivery and quote by return.
Send us the Oteco part number
Send the Oteco part number, or the equipment, model, size, pressure and service, and we reply within one business day with availability from Dubai, lead time and a fixed-price quote.
Plant-down? Call +971 52 2477942 — 24/7
