Skip to content
IH-TF-PM-PCD

Precision Cold-Drawn Steel Tubes

Precision & Mechanical TubesEx-stock · delivery in 3 days
Cold-drawn precision steel tubes on a rack, thin walls visible at the cut ends
VIEW 01·Cold-drawn precision steel tubes on a rack, thin walls visible at the cut ends

Cold-drawn seamless steel tube to close OD and wall tolerances, to EN 10305-1 and EN 10305-4, DIN 2391 and ASTM A519. Made to EN 10305-1, EN 10305-4, DIN 2391. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.

Key features

  • Product type: Precision Cold-Drawn Steel Tubes
  • Construction: Seamless, cold drawn or hot finished
  • Standards: EN 10305-1, EN 10305-4, DIN 2391, ASTM A519, GB/T 3639, EN 10305
  • Base tube material: E235; E355; St35; St45; St52; A519 1020/1045/4130
  • Outside diameter: 6–42 mm
  • Wall thickness: 1–5 mm
Product type
Precision Cold-Drawn Steel Tubes
Construction
Seamless, cold drawn or hot finished
Base tube material
E235; E355; St35; St45; St52; A519 1020/1045/4130
Ships in 24h
Order before 14:00 GST · Jebel Ali
24-month warranty
Manufacturer-backed · genuine parts
Engineering support
A real applications engineer

Product description

Cold-drawn seamless steel tube to close OD and wall tolerances, to EN 10305-1 and EN 10305-4, DIN 2391 and ASTM A519. Supplied normalised for hydraulic lines and in drawn or annealed conditions for cylinders and machined parts.

Specification

  • EN 10305-1 E235 +N: ReH ≥235 MPa, Rm 340–480 MPa, A ≥25%
  • EN 10305-1 E355 +N: ReH ≥355 MPa, Rm 490–630 MPa, A ≥22%
  • Delivery conditions: +C (BK) as drawn; +LC (BKW) light final pass; +SR (BKS) stress relieved; +A (GBK) annealed; +N (NBK) normalized
  • Hydraulic line tube (EN 10305-4) condition: +N (normalized), E235 or E355
  • Hydraulic tube OD tolerance (mm): ±0.08 (OD 4–30), ±0.15 (35–38), ±0.20 (42–50), ±0.25 (55–60), ±0.30 (70), ±0.35 (80)
  • Hydraulic tube wall tolerance: ±10%, minimum ±0.1 mm
  • Hydraulic tube range (EN 10305-4): 4×0.5 to 80×12.5 mm
  • Standard length, hydraulic tube: 6 m

Standards

EN 10305-1, EN 10305-4, DIN 2391, ASTM A519, GB/T 3639, EN 10305. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.

Materials

  • Tube: E235; E355; St35; St45; St52; A519 1020/1045/4130

Testing and documents

  • EN 10305-1: product analysis, tensile, dimensions, visual; NDT on agreement
  • Hydraulic working pressures are calculated (DIN 2413 or AS 4041) for straight tube; bends reduce them
  • Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan

Where it is used

  • Cylinder barrels and piston rods (honed / skived tube) for oilfield and marine equipment
  • Hydraulic power-unit and mobile-equipment pressure lines

Sizes

28 sizes, each under its own Indus part number in the size table. These are the common sizes; others are made on request.

Ordering

Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity. We quote with the mill certificates and the inspection you need.

Identification

ParameterValue
Product typePrecision Cold-Drawn Steel Tubes
ConstructionSeamless, cold drawn or hot finished

Compliance

ParameterValue
StandardsEN 10305-1, EN 10305-4, DIN 2391, ASTM A519, GB/T 3639, EN 10305

Construction

ParameterValue
Base tube materialE235; E355; St35; St45; St52; A519 1020/1045/4130

Dimensions

ParameterValue
Outside diameter6–42 mm
Wall thickness1–5 mm
LengthRandom or fixed lengths; cut to length on request
Size tableCommon sizes

Quality

ParameterValue
TestingEN 10305-1: product analysis, tensile, dimensions, visual; NDT on agreement; Hydraulic working pressures are calculated (DIN 2413 or AS 4041) for straight tube; bends reduce them
CertificationMill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement

Application

ParameterValue
Typical servicesCylinder barrels and piston rods (honed / skived tube) for oilfield and marine equipment; Hydraulic power-unit and mobile-equipment pressure lines

Shipping & lead time

Lead TimeEx-stock from Dubai — delivered within 3 working days in the UAE. Export orders ship on the lane stated for the destination.

Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations

From the blog

Written about this part