Skip to content
+971 52 2477942
Indus Hydraulics
Lane DXB → QAدولة قطر

Export from Dubai

QA

Hydraulic & industrial hose supplier in Qatar

Indus Hydraulics supplies Qatar from Dubai three ways: by road through Saudi Arabia and the Abu Samra crossing in typically three working days, by sea from Jebel Ali into Hamad Port in five to eight, and by air into Doha in one to two. Sea is cheaper once the order runs to pallets and drops the Saudi transit leg. Whichever route, clearance turns on the consignee's commercial registration and establishment card, the GCC Conformity Mark for regulated lines and an attested Certificate of Origin.

Typical transit
Typically 3 working days by road from dispatch · 5–8 days by sea to Hamad Port · 1–2 days by air to Doha
Freight
Road freight via Abu Samra · Sea freight to Hamad Port · Air freight where the schedule is tighter
Incoterms 2020
DAP to the buyer’s site · CIF Hamad Port · FOB Jebel Ali · EXW Dubai for a nominated forwarder
Documentation
GCC Conformity Mark where the product is regulated · Certificate of Origin, Dubai Chamber attested · Consignee CR and establishment card for the declaration
Request an export quote WhatsApp usEmail sales@indushydraulics.me
Fig. 01 · Export lane DXB → QAMercator · WGS 84
BAHRAINABU SAMRADOHARAS LAFFANDUKHANMESAIEED50°E51°E52°E25°N26°NN50 KMROAD · 570 KM · FROM JEBEL ALI · DXB
Border crossingDelivery cityroad corridor from JEBEL ALI · DXB
Origin
Jebel Ali · Dubai
Primary mode
Road freight
Border crossing
Salwa / Abu Samra
Transit
3 working days
Quoted in
AED
Docs prepared
Before dispatch, in Dubai
Warehouse aisle with racked reels of hydraulic hose on one side and bins of steel hose fittings and adapters on the other

01 · Stock

Stock held in Dubai, not drop-shipped from a factory queue.

Technician in safety glasses crimping a steel fitting onto a hydraulic hose, tagged assemblies and a pressure-test cabinet behind

02 · Assembly

Assemblies crimped and pressure-tested before they are packed.

Export documents and certificates fanned out on a desk beside a rubber stamp, a pen and a hydraulic hose fitting

03 · Documents

Conformity set for Qatar prepared while the order is picked.

Flatbed trailer loaded with shrink-wrapped hydraulic hose coils and cartons, strapped down at a warehouse yard gate

04 · Dispatch

One consignment, one set of documents, tracking on dispatch.

Catalogue · 21 clusters · 289 ranges

What we supply to Qatar

Browse the full catalogue

Everything below ships from the same Dubai warehouse, so a mixed order travels as one consignment under one set of documents. Open any card for its full list of ranges, or follow a heading through to specifications and an RFQ.

A group of hydraulic hose and connectors — wire-braid, spiral and thermoplastic hose with crimped ends sweeping across the frame, over a fan of plated crimp fittings, elbows, swivel nuts, ferrules, a flat-face quick coupler and a split-flange clamp
01

Hoses & Fittings supplier in Qatar

77 ranges

Hydraulic hose, fittings and adapters — wire-braid, spiral, compact and thermoplastic hose, crimp fittings and ferrules, SAE J518 flanges, quick couplers, and DIN 2353, BSP, JIC 37°, ORFS, metric and NPT thread forms. Carbon steel and SS316L.

Show all 77 Hoses & Fittings ranges
A group of industrial hoses — red air hose, black suction hose with a helix, clear PVC suction hose and corrugated stainless hose — with cam and groove, Storz and claw couplings and a hose clamp in front
02

Industrial Hoses supplier in Qatar

36 ranges

Industrial hoses for air, water, food, oil, chemical, steam and abrasive applications. Own-brand Indus rubber and PVC lines alongside engineered metallic and PTFE hose assemblies.

Show all 36 Industrial Hoses ranges
A group of lifting and rigging gear — a four-leg chain sling, a wire rope sling, a yellow webbing sling, shackles, a swivel hook, a turnbuckle and a manual chain block
03

Lifting & Rigging supplier in Qatar

37 ranges

Shackles, hooks, lifting chain, wire rope, slings, hoists and blocks for lifting and rigging — each size under an Indus part number, with the working load limit wherever the manufacturer rates it. Supplied from Dubai with the manufacturer's test certificate.

Show all 37 Lifting & Rigging ranges
A group of oilfield valves — a flanged gate valve with handwheel, a ball valve with lever, a lug butterfly valve, a check valve, a union-end valve and a needle valve
06

Oilfield Valves supplier in Qatar

13 ranges

Wellhead, frac, and process oilfield valves — ball, gate, check, plug, choke, globe, butterfly, surface safety (SSV/ESD), pressure relief, instrumentation. API 6A / 6D / 16C, sour and standard service.

Show all 13 Oilfield Valves ranges
A group of red flow iron — pup joints with hammer union nuts, a swivel joint, a tee and a plug valve, with metal ring joint gaskets in front
07

Flow Iron & Wellhead supplier in Qatar

10 ranges

WECO frac iron, integral fittings, hammer unions, swivel joints, manifolds, API 6A flanges, wellhead systems, and surface test trees for upstream oil and gas. 1K to 20K psi, sour and standard service. FMC / Cameron / SPM / Anson / NOV / Stream-Flo / Indus.

Show all 10 Flow Iron & Wellhead ranges
A group of hydraulic and process valves — a twin-solenoid directional valve seated on a drilled aluminium manifold block, a resilient-seated butterfly valve with lever handle, a screw-in cartridge relief valve and a compact valve body
08

Valves & Manifolds supplier in Qatar

6 ranges

DEMCO resilient-seated butterfly valves from 2″ to 36″ with actuators, gear operators and handles, Victaulic grooved butterfly valves, industrial and high-pressure hydraulic ball valves, and Yuken CETOP 3 solenoid directional, relief and modular valves.

A red blowout preventer with an annular preventer on a ram body, a ram block assembly and rubber packer elements in front
09

Blowout Preventers (BOP) supplier in Qatar

8 ranges

Annular and ram blowout preventers built to the Hydril GK and Cameron U patterns, ram blocks, control units, choke & kill manifolds, diverters, drilling spools and BOP spares for onshore and offshore drilling, with sour-service (NACE MR0175) construction.

A group of oilfield instruments — a pressure gauge, pressure transmitters, a turbine flowmeter, a magnetic flowmeter, a thermowell, a proximity sensor and an explosion-proof junction box
10

Instrumentation & Controls supplier in Qatar

15 ranges

Oilfield instrumentation & controls — data acquisition, flowmeters (magnetic / turbine / Coriolis), pressure sensors, gauges, thermometers, AC/DC converters, VFD systems, ex-proof electrical panels.

Show all 15 Instrumentation & Controls ranges
A skid-mounted horizontal three-phase separator with valves and gauges, beside a vertical surge tank on its own skid
11

Well Testing Equipment supplier in Qatar

11 ranges

Surface well-testing packages — 3-phase separators, MPFM systems, surge tanks, KO drums, flare stacks, test pumps, sand filters, ESD panels, data headers, piping packages.

Show all 11 Well Testing Equipment ranges
A frac pumper on a tri-axle semi-trailer — diesel engine and transmission at the front, plunger pump at the rear, discharge iron along the side
12

Fracturing Equipment supplier in Qatar

9 ranges

Frac fleet equipment — pumpers up to 3,000 HP, transfer pumps, missiles, sand silos, blenders, hydration units, LAS, data vans, and frac tanks.

Show all 9 Fracturing Equipment ranges
A group of hydraulic tools — a square-drive torque wrench with reaction arm, a bottle jack, a three-jaw puller, a flange spreader, a nut splitter, a coiled high-pressure hose and two impact sockets
20

Hydraulic Tools & Bolting supplier in Qatar

13 ranges

Enerpac torque wrenches, bolt tensioners, flange tools, jacks, pullers, presses and cutters, Stanley hydraulic power tools and Pierce winches, listed by series with every model number.

Show all 13 Hydraulic Tools & Bolting ranges

Export quote · QA

Send the part list for Qatar

Part numbers if you have them; bore, thread and pressure if you do not. A photo of the failed part is usually enough.

One line per item. Quantities and lengths help us quote from stock.

Drag and drop, or

PDF · JPG · PNG · HEIC · STEP · DWG — up to 25 MB each, 6 files

0 attachments ready

Standards

Standards we supply and certify against for Qatar

StandardTypesApplies to
EN 8531SN · 2SNWire-braid hydraulic hose
EN 8564SP · 4SHSpiral-wire hydraulic hose
EN 8571SC · 2SCCompact wire-braid hose
SAE J517100R1 · R2 · R12 · R13 · R15SAE hydraulic hose series
ISO 18752Grades A–DPerformance-based hose classification
API 16CChoke & killWell control flexible lines
API 7KRotary & vibratorDrilling hose
API 6APSL 1–4Wellhead equipment
DIN 2353L · S seriesBite-type tube couplings
ISO 8434-124° coneMetric tube connections
ISO 6162 / 12151Code 61 · 62SAE flange and hose connections
EN 14420-5ClampedIndustrial hose couplings
NACE MR0175ISO 15156Sour-service materials
ISO 9001:2015CertifiedQuality management system

Customs

Tariff lines we declare under

  • 4009.22Rubber tube, reinforced with metal, with fittingsHydraulic hose assemblies
  • 4009.42Rubber tube, reinforced with other materials, with fittingsIndustrial hose assemblies
  • 7307.91Flanges, iron or steelSAE and API flanges
  • 7307.99Tube and pipe fittings, iron or steelAdapters, nipples, couplings
  • 8481.80Taps, cocks, valves and similar appliancesBall, gate, butterfly, needle
  • 8413.60Rotary positive displacement pumpsGear and vane pumps
  • 8412.21Hydraulic power engines, linear actingCylinders
  • 3403.99Lubricating preparationsGreases, pastes, compounds

Classification is confirmed line by line at quotation. This is the set most consignments to Qatar are declared under.

Freight

Three ways in, priced per shipment

Road freight3 days
Al Batha then Abu SamraDefault for most orders
Sea, LCL5–8 days
Jebel Ali to Hamad PortVolume and palletised orders
Air freight1–2 days
DXB to DOHWhen the line is down

Sequence

How an order to Qatar works

  1. 01Send the part numbers, or the bore, thread and pressure if you do not have them. A photo of the failed part is usually enough.
  2. 02We quote in AED against real stock, with the Incoterm stated on the Estimate rather than assumed.
  3. 03Once accepted, documents are prepared for Qatar before the consignment leaves Dubai.
  4. 04Goods dispatch by road, sea or air, and you get the paperwork and tracking together.

Industries

Who we supply in Qatar

A BOP accumulator unit with rows of pressure bottles, a pump skid and bundled hydraulic hoses at the base of a desert land rig at sunset
oil · gas

Oil & Gas in Qatar

Hose, valve and flow-iron support for contractors on the North Field LNG expansion and the LNG trains at Ras Laffan, and for the Dukhan onshore field, quoted to API 6A, API 16C and NACE MR0175 where the specification names them.

Industry page
A hydraulic anchor-handling winch on the wet aft deck of an offshore supply vessel, an oil platform on the horizon
marine

Marine & Offshore in Qatar

Deck machinery hydraulics, hose assemblies and rigging for terminal handling at Hamad Port, the LNG berths and shipyard at Ras Laffan, and the support fleets serving Qatar's offshore fields.

Industry page
An excavator’s boom cylinders and hydraulic hoses on a construction site, a hazy city skyline behind
construction

Construction in Qatar

Excavator, crane and batching-plant hydraulics, slings and shackles for infrastructure and Lusail contracts and the expansion work inside Ras Laffan and Mesaieed industrial cities.

Industry page
Spillway radial gates on a hydroelectric dam, each raised by a pair of hydraulic cylinders, water rushing beneath
power

Power & Energy in Qatar

Actuator and governor hydraulics and industrial hose for the power and desalination plants at Ras Laffan, Ras Abu Fontas and Umm Al Houl, and the Al Kharsaah solar plant.

Industry page
A glowing steel strip passing through a hot rolling mill stand with its hydraulic cylinders and tubing
steel

Steel & Metals in Qatar

High-pressure hose, fittings and adapters for the steel and aluminium plants of Mesaieed Industrial City, where rolling and casting lines run continuously and a failed hose stops production.

Industry page
Close-up of a mining shovel’s hydraulic boom cylinders and hoses as it loads a haul truck in an open-pit mine
mining

Mining in Qatar

Dust-rated hose and fittings for quarry, crushing and aggregate plant, and for the bulk-handling equipment that moves aggregate and raw materials through Qatar's ports.

Industry page

Brands stocked for Qatar

Delivery coverage

Cities and sites we deliver to in Qatar

DAP deliveries go to the site gate. Coordinates are given because project sites are easier to name that way than by address.

12 locations listed

  • Doha

    Ad Dawhah

  • Ras Laffan

    Al Khor

  • Dukhan

    Al Shahaniya

  • Mesaieed

    Al Wakrah

  • Hamad Port

    Al Wakrah

  • Al Rayyan

    Al Rayyan

  • Al Wakrah

    Al Wakrah

  • Al Khor

    Al Khor

  • Lusail

    Ad Dawhah

  • Umm Bab

    Al Shahaniya

  • Al Ruwais

    Ash Shamal

  • Industrial Area, Doha

    Ad Dawhah

Questions we get asked

Supplying Qatar, in detail

01

Road or sea into Qatar?

Road for anything urgent or under a pallet or two: typically three working days from dispatch via Al Batha and Abu Samra. Sea LCL from Jebel Ali into Hamad Port takes five to eight days, is cheaper once the packing list runs to pallets, and removes the Saudi transit leg. Air into Doha takes one to two days when a line is down. Tell us volume and urgency and we quote the right mode.

02

Why does road freight from Dubai to Qatar go through Saudi Arabia?

Because Qatar's only land border is with Saudi Arabia. Trucks leave Dubai, cross into Saudi Arabia at Al Batha and enter Qatar at Abu Samra, opposite Salwa on the Saudi side, in typically three working days from dispatch. If a Saudi transit leg does not suit the consignment, sea freight from Jebel Ali into Hamad Port avoids it entirely.

03

Can you deliver to Ras Laffan and Mesaieed?

Yes, on DAP terms to the gate. Ras Laffan and Mesaieed are industrial cities with their own access procedures, so we need the consignee's gate-pass details with the order rather than at dispatch. Air into Doha shortens the approach for urgent lines and sea into Hamad Port suits heavy ones; the final leg to the gate is quoted rather than estimated.

04

Is a GCC Conformity Mark needed for products entering Qatar?

For regulated categories, yes. At quotation we mark which lines on your list fall inside the regulated scope and therefore need the GCC Conformity Mark, and which fall outside it, so nothing regulated ships unmarked and nothing unregulated carries paperwork it does not need. Choosing road or sea into Qatar changes transit time and cost, not that requirement.

05

Can you supply to LNG and petrochemical specifications?

Yes. Where a specification names a standard — API 6A, API 16C, NACE MR0175 — we quote against that standard and the certification travels with the goods. For hydraulic hose the usual references are ISO 18752, EN 853, EN 856 and SAE J517. We supply valve and flow-iron lines from TechnipFMC, Cameron (SLB), SPM, Anson, Stream-Flo and WOM where the specification names those makers.

06

What do you need from us for the Qatar customs declaration?

The consignee's commercial registration and establishment card details, and the delivery address exactly as it appears on them. The declaration is built from those, so a mismatch between the licence and the invoice is what holds a consignment, not the route. Send them with the part list and the invoice, packing list and Certificate of Origin are prepared in Dubai around them before dispatch.

07

Can you supply hose assemblies made to length for Qatar?

Yes. Assemblies are cut, crimped and pressure-tested in Dubai and shipped finished, each tagged with the hose, the fittings and the test date, so a maintenance crew at Ras Laffan or Mesaieed fits them rather than makes them. Send the hose specification, both end fittings with their thread or flange type, and the overall length; an old tag works where the part number is lost.

08

Can a mixed maintenance order for Qatar ship as one consignment?

Yes, and that is the main argument for buying from one Dubai warehouse. Hose, fittings, adapters, seals, valves and lubricants with their safety data sheets are picked together and travel under one Certificate of Origin and one set of documents, with one arrival date instead of several. The Estimate prices the whole rebuild together rather than as parts you have to reconcile.

09

Do you supply rigging and lifting gear to Qatar?

Yes. Slings, shackles and rigging hardware ship from Dubai marked with their working load limit and with the manufacturer's test certificates the order calls for, on the same consignment as hydraulic parts. Inspection on site stays with your appointed lifting inspector. Send the certificate format your contractor needs at quotation and we confirm the document set.

10

What lead time should we plan for delivery in Qatar?

Plan on stock confirmation, documents and transit together. The Estimate is quoted against real stock; transit is then typically three working days by road from dispatch, five to eight by sea to Hamad Port, or one to two by air. Lines that need a GCC Conformity Mark add that work, which starts at quotation. We confirm a delivery date once stock and documents are confirmed, not before.

11

How do I request a quotation from Doha?

Send part numbers, quantities and the delivery location — Doha, the Industrial Area, Ras Laffan, Mesaieed or Hamad Port — through the quote form or by email, with your CR and establishment card details. The Estimate states the route and the Incoterm: DAP to your site, CIF Hamad Port, FOB Jebel Ali or EXW Dubai for your forwarder. Flag urgency early, because it decides road, sea or air.

12

Do you supply lay flat hose for construction dewatering in Qatar?

Yes. Coastal sites in Doha often sit on a high water table, and our TPU and NBR lay flat hose carries dewatering pump discharge from 2" to 16", with rigid-helix suction hose for the pump inlet and grooved or Storz couplings for the discharge line. Hose ships from Dubai as bulk coils up to 400 m or as made-up assemblies with couplings fitted, with the size table and pressure rating for each bore.

From the blog

Guides for buyers in Qatar

Industrial hose

Fire hose requirements in the UAE: what the Civil Defence code asks for hose reels, racks and risers

In the UAE, fire hose is not chosen from a catalogue alone: the Fire and Life Safety Code sets hose types, sizes and lengths for reels, racks and landing valves, and requires equipment to be listed, approved and registered by Civil Defence. A plain guide to what the code asks for, how Saudi Arabia and Qatar compare, and what to send a supplier.

4 min read

Industrial hose

Single vs double jacket fire hose: construction, uses and how to choose

A double jacket fire hose has a second woven jacket inside the first. That buys pressure capacity, abrasion protection and a hose that keeps working if the outer jacket is cut — at the cost of weight and bulk. Where each belongs, how the NFPA, EN and UAE rules treat them, and how to choose for attack lines, supply lines, hose stations, cabinets and forestry work.

4 min read

Industrial hose

Dewatering discharge permits in Dubai, Abu Dhabi and Qatar: what the hose and pump plan must show

Pumping groundwater out of an excavation is regulated in every Gulf city, and the permit is built around the equipment: how many dewatering points, how many pumps and of what capacity, what diameter of discharge line, and what settlement tank. A plain guide to the Dubai, Abu Dhabi and Qatar regimes, and how to put together a hose and pump plan that gets through.

5 min read

Industrial hose

Construction dewatering hose in the GCC: wellpoints, deep wells and the discharge line

Across much of the Gulf coast the water table sits a metre or two below the surface, and in Doha, Jeddah and Kuwait City it has been rising. Almost every basement, tunnel and utility trench has to be dewatered. How the hose system is put together — wellpoint connections, suction, header and lay flat discharge to a settlement tank — and how to size and specify each part.

5 min read

Industrial hose

Lay flat hose in Gulf heat: temperature ratings, UV, storage and summer site practice

UAE air temperatures passed 51 °C in 2025, and sun-baked ground runs hotter still. A lay flat hose rated to +80 °C has less margin than it seems once it lies empty on sand in July. What heat and UV do to TPU, nitrile and PVC hose, why warm water in a static line is a hygiene risk, and how to deploy, run and store hose through a Gulf summer.

5 min read

Industrial hose

Fire hose liners compared: EPDM, natural rubber, polyurethane and nitrile

The jacket carries the pressure; the liner decides how the hose ages, what it tolerates and how much it weighs. EPDM resists heat, ozone and weathering; natural rubber is supple and cheap; polyurethane is thin, light and abrasion-resistant; nitrile handles oil and fuel. Here is how to match the liner to the duty — attack line, hose station, forestry pack or cabinet.

5 min read

Next step

Shipping to Qatar?

Send the part numbers, or the bore, thread and pressure if you do not have them. We quote from real stock, in AED, with the Incoterm stated rather than assumed.

WhatsApp usEmail the export desk

Plant-down? Call +971 52 2477942 — 24/7

Quick enquiry

RFQ · QA

No account needed. We reply from the Dubai export desk.

Other export markets · 126 destinations

We run the same lane from Dubai to 125 other markets

All export markets

GCC & Middle East

Saudi ArabiaOmanQatar — this pageBahrainKuwaitIraq