Category
Steel Weld-On Adapters
Weld-to-thread adapters in zinc-plated steel, for putting a JIC or NPT end on tube or metal hose.
Choosing a weld-on adapter
Choose by the tube O.D. the weld end must match, then by the thread and gender. A female swivel lets the joint be made up without turning the welded tube. Remove the plating around the weld before welding. Stainless weld-on adapters are listed under Stainless Steel Weld Outlets & Weld-On Adapters.
Threads
JIC 37° ends follow SAE J514; NPT ends ASME B1.20.1.
Size range
Every size above is a part number you can quote from. Open any listing for its full table.
Delivery
Steel Weld-On Adapters across the Gulf
Ex-stock from Dubai, delivered within 3 working days in the UAE.
Hose and fittings are the bulk of what leaves this warehouse, and they travel well: a crated batch of assemblies with its crimp records, or a box of adapters on an airway bill. Buyers outside the UAE usually order to a measured list rather than to a part number, because a hose is defined by its ends, its length and its route rather than by a code. Send those and we will quote against them.
Beyond the Gulf
- North Africa
- Egypt, Mauritania, Morocco
Steel Weld-On Tube × NPT Male Adapter
Category image · Hoses & FittingsSteel Weld-On Tube × JIC 37° Male Adapter
Steel Weld-On Tube × NPT Female Adapter
Category image · Hoses & FittingsSteel Weld-On Tube × JIC 37° Female Swivel Adapter
Questions we get asked
About this range
- 01Is there a pressure rating?
- The manufacturer publishes none: the weld, the tube or hose and the threaded end set what the joint holds. Tell us the working pressure and we will confirm it.