Skip to content

Japanese Hose Fittings

10 SKUs1 brands

Showing 1–10 of 10 SKUs

Toyota-type JIS metric female swivel hose fitting, yellow zinc-plated steel hex nut and crimp tail

Toyota Female Hose Fitting (JIS Metric)

Indus Hydraulicsstraight30° flare seat, 60° included (Japanese OEM)
Inquire
Komatsu-type JIS metric male hose fitting, straight, zinc-plated steel hex body and crimp tail

Komatsu Male Hose Fitting (JIS Metric)

Indus Hydraulicsstraight30° flare seat, 60° included (Japanese OEM)
Inquire
Straight Komatsu-type JIS metric 30° female swivel hose fitting, hex nut and crimp tail

Komatsu Female Hose Fitting (JIS Metric)

Indus HydraulicsM16 – M33 (Komatsu OEM size range)30° flare seat, 60° included (Japanese OEM)
Inquire
JIS gas male 60° cone hose fitting, straight, zinc-plated steel hex body and crimp tail

JIS Gas Male 60° Cone Hose Fitting

Indus HydraulicsG1"×11 to G3/8"×19straight
Inquire
Straight JIS flange head hose fitting (JIS B2291), zinc-plated steel with crimp tail

JIS Flange Hose Fitting

Indus HydraulicsFlange face-08 to -12
Inquire
90° elbow Toyota-type JIS metric female swivel hose fitting, zinc-plated steel with crimp tail

90° Toyota Female Hose Fitting (JIS Metric)

Indus Hydraulics90-elbowM14 – M30 (Toyota OEM size range)
Inquire
90° Komatsu-type JIS metric 30° female swivel hose fitting, zinc-plated steel with crimp tail

90° Komatsu Female Hose Fitting (JIS Metric)

Indus Hydraulics30° cone seat, 60° included (JIS B8363)-04 to -24
Inquire
90° elbow JIS flange head hose fitting (JIS B2291), zinc-plated steel with crimp tail

90° JIS Flange Hose Fitting

Indus HydraulicsFlange face-08 to -12
Inquire
45° elbow Toyota-type JIS metric female swivel hose fitting, zinc-plated steel with crimp tail

45° Toyota Female Hose Fitting (JIS Metric)

Indus HydraulicsM14 – M30 (Toyota OEM size range)45-elbow
Inquire
45° elbow JIS flange head hose fitting (JIS B2291), zinc-plated steel with crimp tail

45° JIS Flange Hose Fitting

Indus Hydraulics5/8"45-elbow
Inquire

Questions we get asked

About this range

01Are Komatsu fittings the same as DIN metric?
No. Komatsu ends use JIS metric threads with a 30° flare seat, where DIN metric fittings seal on a 24° cone. The threads can measure alike, but the seats will not seal together.
02What is a JIS gas fitting?
A Japanese fitting on a BSP-pattern thread with a 60° cone seat. It mates with JIS gas ports and is not interchangeable with every BSP fitting, so match the seat as well as the thread.