Low-Fin U-Bend Tubes

Integral low-fin tubes bent into U-tubes, with the fins removed at the bend and a plain land at each tangent, so a removable bundle gets the extra shell-side surface of low-fin tube. Made to ASTM A498, ASTM A1012, ASTM B359. Supplied from Dubai with an Indus part number for each size and mill test certificates on request.
Key features
- Product type: Low-Fin U-Bend Tubes
- Construction: Bent from straight seamless or welded tube
- Standards: ASTM A498, ASTM A1012, ASTM B359, ASME SA334 Gr 6, ASME SA334
- Base tube material: SA-334 Gr 6; SA-179; stainless; Cu-Ni
- Fin material: integral
- Outside diameter: 19.05–25.4 mm
- Wall thickness: 2.108 mm
- Product type
- Low-Fin U-Bend Tubes
- Construction
- Bent from straight seamless or welded tube
- Base tube material
- SA-334 Gr 6; SA-179; stainless; Cu-Ni
- Fin material
- integral
Product description
Integral low-fin tubes bent into U-tubes, with the fins removed at the bend and a plain land at each tangent, so a removable bundle gets the extra shell-side surface of low-fin tube.
Specification
- Minimum bend radius: 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD
- Wall thinning at the bend: Per the governing specification on the order (ASTM A688 / TEMA, or A556 / B395) — no single percentage
- Bend heat treatment: To order: stress-relief or solution anneal of the bend plus ~150 mm of leg (A688), or ≥300 mm where the project specification requires
- Leg length: Up to ~12 m typical; straight tube up to 30 m on request
- Plain land at bend tangent: Fin removed at bend; land at tangent ±6.35 mm
- Plain-end length tolerance, U-bends: +12.7 / −0 mm
- Test: Hydrotest after bending, standard
- CS grades offered at 26 FPI: SA-179, SA-214, SA-334 Gr 1/3/6
Standards
ASTM A498, ASTM A1012, ASTM B359, ASME SA334 Gr 6, ASME SA334. Equivalent grades across ASTM, EN, DIN, JIS and GB/T standards are indicative; we check them against each tender.
Materials
- Tube: SA-334 Gr 6; SA-179; stainless; Cu-Ni
- Fins: integral
Testing and documents
- Eddy current after finning
- Hydrotest after bending
- Mill test certificate to EN 10204 3.1 on request; third-party inspection can be arranged against your inspection and test plan
Where it is used
- U-tube exchangers in gas plants, including low-temperature service in SA-334 Gr 6
Sizes
2 sizes, each under its own Indus part number in the size table. The table lists typical sizes for the range; other sizes are made on request.
Ordering
Quote the Indus part number from the size table, or send the standard and grade, the outside diameter and wall (BWG or millimetres, minimum or average wall), the length and the quantity, with the bend schedule: centreline radius and leg length for each row, and any heat treatment of the bends. We quote with the mill certificates and the inspection you need.
Identification
| Parameter | Value |
|---|---|
| Product type | Low-Fin U-Bend Tubes |
| Construction | Bent from straight seamless or welded tube |
Compliance
| Parameter | Value |
|---|---|
| Standards | ASTM A498, ASTM A1012, ASTM B359, ASME SA334 Gr 6, ASME SA334 |
Construction
| Parameter | Value |
|---|---|
| Base tube material | SA-334 Gr 6; SA-179; stainless; Cu-Ni |
| Fin material | integral |
Dimensions
| Parameter | Value |
|---|---|
| Outside diameter | 19.05–25.4 mm |
| Wall thickness | 2.108 mm |
| Length | Random or fixed lengths; cut to length on request |
| Bend radius | 1.5×OD centreline radius available; dimensional tolerances guaranteed from 2×OD |
| Size table | Typical sizes — other sizes on request |
Quality
| Parameter | Value |
|---|---|
| Testing | Eddy current after finning; Hydrotest after bending |
| Certification | Mill test certificate to EN 10204 3.1 on request; third-party inspection by arrangement |
Application
| Parameter | Value |
|---|---|
| Typical services | U-tube exchangers in gas plants, including low-temperature service in SA-334 Gr 6 |
Shipping & lead time
Sizes & part numbers
2 sizes- Indus part no.IH-TF-UF-LOF-0190-211-H012
- O.D. (mm)
- 19.05
- O.D. (in)
- 3/4
- Wall (mm)
- 2.108
- Fin height (mm)
- 1.245
- Fins per inch
- 26
- Fins per metre
- 1024
- Root dia. (mm)
- 16.561
- Wall under fin (mm)
- 1.651
- Material
- CS incl. SA-334 Gr 6
- Indus part no.IH-TF-UF-LOF-0254-211-H012
- O.D. (mm)
- 25.4
- O.D. (in)
- 1
- Wall (mm)
- 2.108
- Fin height (mm)
- 1.245
- Fins per inch
- 26
- Fins per metre
- 1024
- Root dia. (mm)
- 22.911
- Wall under fin (mm)
- 1.651
- Material
- CS incl. SA-334 Gr 6
O.D. (mm) — Outside diameter of the tube or pipe in millimetres. O.D. (in) — The same outside diameter in inches, as the trade orders it. Wall (mm) — Wall thickness in millimetres: minimum or average wall per the governing standard and the order. Fin height (mm) — Height of the fin above the tube surface in millimetres. Fins per inch — Fin density in fins per inch; a band means any density in it can be made. Fins per metre — The same fin density in fins per metre. Root dia. (mm) — Diameter at the root of the fins, in millimetres. Wall under fin (mm) — Average wall thickness under the fins, in millimetres. Material — Tube materials this size is made in, as published.
These are typical sizes for the range, not a full mill list. Other diameters, walls, fin geometries and lengths are made to order: tell us the standard and grade, the O.D. and wall, and the length you need. Mill test certificates to EN 10204 3.1 are available on request.
What are low-fin U-bend tubes used for?▾
How do I read the low-fin U-bend part number IH-TF-UF-LOF-0254-211-H012?▾
What sizes do low-fin U-bend tubes come in?▾
What is the fin geometry on low-fin U-bend tubes?▾
How tight a bend radius can low-fin U-bend tubes have?▾
What materials are low-fin U-bend tubes made from?▾
Which standards apply to low-fin U-bend tubes?▾
What tests are done on low-fin U-bend tubes?▾
Low-fin U-bend tubes or plain U-bends: which is right for a gas-plant exchanger?▾
Where are low-fin U-bend tubes used?▾
Can I get low-fin U-bend tubes from Dubai?▾
What bend schedule do I send for low-fin U-bend tubes?▾
Shipped worldwide from our Dubai warehouse. Transit, routes and documentation for 136 destinations
From the blog

