Skip to content
Assembly, crimping & certification

Crimped, reusable or ready-made: choosing how to get a hydraulic hose assembly

There are three ways to end up with a working hose: crimp it in a shop, fit reusable ends in the field with two spanners, or buy it made up. Each has rules the makers spell out — reusable ends exist for braided and R5 hose but not for spiral; nothing crimped is ever reused; a proof test is twice working pressure. How to choose, how to specify the assembly (STAMP), length tolerances, testing and shelf life, plus the hose types, live swivels and washdown ends in our range.

Written by
Ayush Bhatia, Director
Published
Updated
Reading
6 min · 4 sections
Share
A crimping machine crimping a braided hose assembly, finished assemblies on a rack, and a reusable fitting on the bench
Crimp in the shop, reuse in the field, or buy the assembly made up.

At a glance

Key takeaways

  1. Crimped ends are permanent, made in a shop to the maker’s crimp specification; they are never reused.
  2. Reusable (field-attachable) ends screw onto hose with spanners. Parker offers them for 1SN, 2SN, R16, R5, air brake and push-lock hose — but lists none for four- or six-spiral hose.
  3. Parker’s tables give one pressure per size for its 1SN and 2SN hose whether the end is crimped or field-attachable; the hose rating governs, not the method.
  4. Specify an assembly with Parker’s STAMP — Size, Temperature, Application, Media, Pressure — and Danfoss adds Ends and Delivery: STAMPED.
  5. On request, Parker proof-tests assemblies to ISO 1402 at twice working pressure for 30–60 seconds; every assembly should carry its maker, date and maximum working pressure.

Figures verified · Field-attachable ranges, reuse rules, STAMP and testing from Parker Catalog 4400 (US and UK); STAMPED and length tolerances from Danfoss and Gates; shelf-life sources quoted as they differ.

A hose fails on a machine miles from a hose shop. Do you fit reusable ends from the service van, crimp a new assembly at the depot, or order it made up? The answer depends on the hose, the pressure, the time and the tools — and on rules the hose makers publish. This guide sets out the three routes and how to specify an assembly whichever you choose.

/01Three routes.

Crimped, reusable or ready-made
RouteHowHosesBest for
Crimped (permanent)HighlightedStem and ferrule crimped to the maker’s chart in an approved crimperAll hydraulic hose, including spiralWorkshop production; highest pressures
Reusable (field-attachable)Socket screwed onto the hose, nipple screwed into the socketParker: 1SN, 2SN, R16, R5, air brake, push-lock — no spiralField repair without a crimper
Ready-made assemblyBuilt and tested by the supplier to length and endsAnyStandard lengths, spares stock, certified assemblies

Parker’s field-attachable range covers its R5 and air-brake hose (20, 21 and 22 Series), 2SN (30 Series), 1SN and R16 (42 Series) and push-lock (82 Series); it lists none for four- or six-spiral hose, which use crimped interlock or skive fittings instead. Assembly is simple — Parker’s 30 Series: put the socket in a vice, screw the hose in anticlockwise until it bottoms, back it out half a turn, then screw the nipple in until its hex shoulders against the socket. Parker’s 1SN and 2SN tables list one working pressure per size for both its crimp and field-attachable series.

/02Specifying the assembly.

Parker’s rule of thumb is "before you spec it, STAMP it": Size, Temperature, Application, Media, Pressure. Danfoss extends it to STAMPED — adding Ends (style, type, orientation, attachment) and Delivery (testing, quality, packaging). For a made-up assembly add the overall length, the end types, and the displacement angle between two elbows. See what to send for a quote.

Assembly length tolerance — makers differ
LengthGates (fig. "SAE J517")Danfoss
Up to 300 mm / 12"±3 mm±1/8"
300–450 mm / 12–18"±5 mm±3/16"
450–900 mm / 18–36"±7 mm±1/4"
Over 900 mm / 36"±1%±1%

Parker Europe works to the asymmetric DIN 20066 table instead — for example +7 / −3 mm up to 630 mm on hose to 25 mm bore. If length matters to the millimetre, state the tolerance on the order.

/03Testing, marking and shelf life.

  • Proof test. Parker Europe proof-tests on request to ISO 1402: twice the assembly’s working pressure for 30 to 60 seconds, with no leakage or pressure drop.
  • Impulse tests are qualification tests for hose and fitting designs, not for each assembly: SAE J343 for SAE 100R hose, ISO 6803 without flexing and ISO 6802 with flexing.
  • Marking. Parker Europe: every assembly carries the manufacturer, production year and month, and the maximum working pressure of the whole assembly.
  • Shelf life. Sources differ: ISO 17165-2 / SAE J1273, as Parker summarises them, allow 10 years from manufacture if stored to ISO 2230; DIN 20066 allows 4 years for bulk hose and 2 years for stored assemblies; Gates tests stock older than 4 years and scraps it after 8. Thermoplastic and PTFE hose are treated as unlimited.

/04Hose, live swivels and washdown ends.

Our range includes the hose itself — SAE 100R1 to R17, EN 857 1SC and 2SC, EN 856 4SP and 4SH, PTFE and 10,000 psi jack hose — standard 2-wire assemblies with JIC, NPT and ORFS ends in lengths from 12" to 300", a pressure-washer assembly, reusable ends for R1, R2AT and R5 hose, in-line and 90° live swivels for rotating connections, and pressure-washer gun and waterjet fittings. For hose types see SAE 100R types.

Common questions

Are reusable hydraulic fittings as good as crimped?
For the hoses they are made for, Parker lists the same working pressure per size for crimp and field-attachable series on its 1SN and 2SN hose. They are not offered for spiral hose.
Can I reuse a reusable fitting?
Only if it has not blown or pulled off a hose, and never on hose that has been in service, per Parker.
What does STAMP mean for hose?
Parker’s checklist: Size, Temperature, Application, Media, Pressure. Danfoss’ STAMPED adds Ends and Delivery.
What is a hose proof test?
Pressurising the finished assembly — Parker Europe to ISO 1402, at twice working pressure for 30–60 seconds — and checking for leaks or pressure drop.
How long can hydraulic hose be stored?
It depends on the standard: 10 years per ISO 17165-2 / SAE J1273 if stored correctly, 4 years for bulk hose per DIN 20066. Gates tests stock over 4 years old and scraps it after 8.
What is a live swivel?
A rotating joint fitted in a hose line so the hose does not twist where a connection turns.

What we list

Reusable hose ends, made-up assemblies, live swivels, pressure-washer fittings and hydraulic hose:

Assemblies, reusable ends and hose

Sources

  1. 1.Parker Hannifin. Catalog 4400 — Hose Products (US). ↗
  2. 2.Parker Hannifin. Catalogue 4400/UK — Technical Handbook. ↗
  3. 3.Danfoss (Aeroquip). Rubber Hydraulic Hose & Fitting Catalog. ↗
  4. 4.Gates. Crimp Data and Dies manual. ↗
  5. 5.ISO 6803:2017 — Hydraulic-pressure impulse test without flexing (abstract). ↗
MarketSupplying Mali from DubaiFreight, import documents and lead times for mining and processing operations in Mali.MarketSupplying Finland from DubaiFreight, import documents and lead times for mining and processing operations in Finland.

What next

  1. 01
  2. 02
  3. 03

    Where the finished assemblies go

    Assemblies are cut to length in Dubai, crimped, tagged, pressure-tested and crated, and that is exactly what makes them practical to send somewhere with no hose shop of its own. A batch built to a measured list travels as one consignment with its test records and arrives ready to fit rather than ready to be made up. The further the site, the larger that difference gets.

    Everything above ships from the same Dubai warehouse. If your destination is not listed, it is almost certainly still one we quote. See every export destination

Need an assembly or reusable ends?

Send the hose, length, both ends, pressure and medium. We will quote the made-up assembly, tested if required, or reusable ends for field repair.

Plant-down? Call +971 52 2477942 — 24/7

Keep reading

More on Assembly, crimping & certification

All articles in this topic
Steel hose fittings: JIC 37° female swivels straight, 45° and 90°, an ORFS female swivel with O-ring, and an NPT male

JIC, ORFS and NPT hose fittings: inch-thread hose ends, drop lengths and how they seal

4 min read

Steel hose fittings with metric and BSP swivels: 24° cone with O-ring, 60° cone, banjo with bolt and washers, JIS flange

BSP, metric, DIN and JIS hose fittings: 60° cones, 24° cones, banjos and Komatsu ends

6 min read

Stainless braided PTFE hose with stainless hose ends and a cut section of white PTFE tube, beside a textile-covered hose

PTFE (R14) and R5 textile hose ends: two hoses where the dash size is not the bore

5 min read

Back to Blog